SGS-6341-Series User Manual

23-135
<class-map-name>]
no class <class-map-name>
associated to a class. Different policy or
new DSCP value can be applied to
different data streams in class mode; the
no command deletes the specified
class.
Policy Class-map Mode
set {ip dscp <new-dscp> | ip precedence
<new-precedence> | internal priority
<new-inp> | drop precedence <new-dp> | cos
<new-cos>}
no set {ip dscp | ip precedence | internal
priority | drop precedence |cos }
Assign a new internal priority for the
classified traffic; the no command
cancels the new assigned value.
Single Bucket Mode:
policy <bits_per_second>
<normal_burst_bytes> ({conform-action
ACTION | exceed-action ACTION} )
Dual Bucket Mode:
policy <bits_per_second>
<normal_burst_bytes> [pir <peak_rate_bps>]
| <maximum_burst_bytes> [{conform-action
ACTION | exceed-action ACTION |
violate-action ACTION }]
ACTION definition:
drop | transmit | set-dscp-transmit
<dscp_value> | set-prec-transmit
<ip_precedence_value> | set-cos-transmit
<cos_value> | set-internal-priority
<inp_value> | set-Drop-Precedence
<dp_value>
no policy
Configure a policy for the classified flow.
The non-aggregation policy command
supporting three colors. Determine
whether the working mode of token
bucket is singe rage single bucket,
single rate dual bucket or dual rate dual
bucket, set the corresponding action to
the different color packets. The no
command will delete the mode
configuration.
accounting
no accounting
Set statistic function for the classified
traffic. After enable this function under
the policy class map mode, add statistic
function to the traffic of the policy class
map. In single bucket mode, the
messages can be only red or green
when passing policy. When printing the
information, in-profile means green and
User’s Manual of SGS-6341 series