SGS-6341-Series User Manual

22-122
spanning-tree transmit-hold-count
<tx-hold-count-value>
no spanning-tree transmit-hold-count
Set the max. transmit-hold-count of
port.
spanning-tree cost-format {dot1d | dot1t}
Set port cost format with dot1d or
dot1t.
8. Configur
e the snooping attribute o
f authentication key
Command Explanation
Port Mode
spanning-tree digest-snooping
no spanning-tree digest-snooping
Set the port to use the authentication
string of partner port. The no
command restores to use the
generated string.
9. Configur
e the FLUSH mode once topology changes
Command Explanation
Global Mode
spanning-tree tcflush {enable| disable|
protect}
no spanning-tree tcflush
Enable: the spanning-tree flush once
the topology changes.
Disable: the spanning tree don’t flush
when the topology changes.
Protect: the spanning-tree flush not
more than one time every ten seconds.
The no command restores to default
setting, enable flush once the topology
changes.
Port Mode
spanning-tree tcflush {enable| disable|
protect}
no spanning-tree tcflush
Configure the port flush mode.
The no command restores to use the
global configured flush mode.
User’s Manual of SGS-6341 series