SGS-6341-Series User Manual

22-120
no spanning-tree [mst <instance-id>]
loopguard
function.
3. Configure MSTP region parameters
Command Explanation
Global Mode
spanning-tree mst configuration
no spanning-tree mst configuration
Enter MSTP region mode. The no
command restores the default setting.
MSTP Region Mode
instance <instance-id> vlan <vlan-list>
no instance <instance-id> [vlan <vlan-list> ]
Create Instance and set mapping
between VLAN and Instance.
name <name>
no name
Set MSTP region name.
revision-level <level>
no revision-level
Set MSTP region revision level.
abort
Quit MSTP region mode and return to
Global mode without saving MSTP
region configuration.
exit
Quit MSTP region mode and return to
Global mode with saving MSTP region
configuration.
no
Cancel one command or set initial
value.
4. Configure MSTP time parameters
Command Explanation
Global Mode
spanning-tree forward-time <time>
no spanning-tree forward-time
Set the value for switch forward delay
time.
spanning-tree hello-time <time>
no spanning-tree hello-time
Set the Hello time for sending BPDU
messages.
spanning-tree maxage <time>
no spanning-tree maxage
Set Aging time for BPDU messages.
spanning-tree max-hop <hop-count>
no spanning-tree max-hop
Set Maximum number of hops of
BPDU messages in the MSTP region.
User’s Manual of SGS-6341 series