SGS-6341-Series User Manual

21-108
address is found in the MAC table but belonging to different VLANs, the switch can
only broadcast the unicast frame in the VLAN it belongs to.
21.2 Mac Address Table Configuration Task List
1. Configure the MAC address aging-time
2. Configure static MAC forwarding or filter entry
3. Clear dynamic address table
4. Configure MAC learning through CPU control
1. Configure the MAC aging-time
Command Explanation
Global Mode
mac-address-table aging-time
<0|aging-time>
no mac-address-table aging-time
Configure the MAC address aging-time.
2. Configure static MAC forwarding or filter entry
3. Clear dynamic address table
Command Explanation
Admin Mode
clear mac-address-table dynamic [address
<mac-addr>] [vlan <vlan-id>] [interface
[ethernet | portchannel] <interface-name>]
Clear the dynamic address table.
Command Explanation
Global Mode
mac-address-table {static | static-multicast
| blackhole} address <mac-addr> vlan
<vlan-id > [interface ethernet
<interface-name>] |
[source|destination|both]
no mac-address-table {static |
static-multicast | blackhole } [address
<mac-addr>] [vlan <vlan-id>] [interface
ethernet <interface-name>]
Configure static MAC entries, static
multicast MAC entries, filter address
entries.
User’s Manual of SGS-6341 series