SGS-6341-Series User Manual

20-96
20.6.4 Dynamic VLAN Troubleshooting
 On the switch configured with dynamic VLAN, if the two connected equipment (e.g.
PC) both belongs to the same dynamic VLAN, first communication between the two
equipment may not go through. The solution will be letting the two equipment
positively send data packet to the switch (such as ping), to let the switch learn their
source MAC, then the two equipment will be able to communicate freely within the
dynamic VLAN.
Ping 192.168.1.200 Ping 192.168.
1.100
192.168.1.100/24 192.168.1.200/24
Dynamic VLAN
Figure 20-9: Dynamic VLAN T
roubleshooting
20.7 GVRP Configuration
20.7.1 Introduction to GVRP
GVRP, i.e. GARP VLAN Registration Protocol, is an application of GARP (Generic Attribute
Registration Protocol). GARP is mainly used to establish an attribute transmission mechanism
to transmit attributes, so as to ensure protocol entities registering and deregistering the
attribute. According to different transmission attributes, GARP can be divided into many
application protocols, such as GMRP and GVRP. Therefore, GVRP is a protocol which
transmits VLAN attributes to the whole Layer 2 network through GARP Protocol.
User’s Manual of SGS-6341 series