SGS-6341-Series User Manual

User’s Manual of SGS-6341 series
Chapter 1 INTRODUCTION
Thank you for purchasing PLANET L3 Multi-Port Full Gigabit Stackable Managed Switch,
SGS-6341-24T4X/SGS-6341-24P4X. The descriptions of these models are as follows:
SGS-6341-24T4X
Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch
SGS-6341-24P4XS
Layer 3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Stackable Managed Switch
(370W)
The term “Managed Switch” means the Switches mentioned in this user’s manual.
1.1 Packet Contents
Open the box of the Managed Switch and carefully unpack it. The box should contain the following items:
 The Managed Switch
x 1
 Quick Installation Guide
x 1
 Power Cord
x 1
 RJ45-to-DB9 Console Cable
x 1
 Rubber Feet
x 4
 Two Rack-mounting Brackets with Attachment
Screws
x 1
 SFP Dust Caps
x 4
If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton
including the original packing material, and use them again to repack the product in case there is a need to
return it to us for repair.
1.2 Product Description
Cost-effective Layer 3 Routing Solution for Enterprise Intranet Networking
Designed for enterprises and small- and medium-sized businesses where an intranet routing network is built,
PLANET SGS-6341 Series, a Layer 3 Stackable Gigabit Managed Switch, provides hardware-based Layer 3
routing capability with IPv4/IPv6 static routing, RIP (Routing Information Protocol) and OSPF (Open
Shortest Path First) routing features which allow to crossover different VLANs and different IP addresses,
and performs effective data traffic control for security, VoIP and video streaming applications.
Efficient IP Stacking Management
The SGS-6341 Series supports IP stacking function that helps network managers to easily configure up to 24
switches in the same series via one single IP address instead of connecting and setting each unit one by one.
1-1