SGS-6341-Series User Manual

20-94
6. Configure the correspondence between the Protocols and the VLAN
Command Explanation
Global Mode
protocol-vlan mode {ethernetii etype
<etype-id>|llc {dsap <dsap-id> ssap
<ssap-id>}|snap etype <etype-id>} vlan
<vlan-id> priority <priority-id>
no protocol-vlan {mode {ethernetii etype
<etype-id>|llc {dsap <dsap-id> ssap
<ssap-id>}|snap etype <etype-id>}|all}
Add/delete the correspondence between
the Protocols and the VLAN, namely
specified protocol joins/leaves specified
VLAN.
7. Adjust the priorit
y of the dynamic VLAN
Command Explanation
Global Mode
dynamic-vlan mac-vlan prefer
dynamic-vlan subnet-vlan prefer
Configure the priority of the dynamic
VLAN.
20.6.3 Typical Application of the Dynamic VLAN
Scenario:
In the office network Department A belongs to VLAN100. Several members of this department
often have the need to move within the whole office network. It is also required to ensure the
resource for other members of the department to access VLAN 100. Assume one of the
members is M, the MAC address of his PC is 00-30-4f-11-22-33, when M moves to VLAN200
or VLAN300, the port connecting M is configured as Hybrid mode and belongs to VLAN100
with untag mode. In this way, the data of VLAN100 will be forwarded to the port connecting M,
and implement the communication requirement in VLAN100.
User’s Manual of SGS-6341 series