SGS-6341-Series User Manual

20-90
2. Show the related configuration of Multi-to-One VLAN translation
Command Explanation
Admin Mode
show vlan-translation n-to-1
Show the related configuration of
Multi-to-One VLAN translation.
20.5.3 Typical Application of Multi-to-One VLAN
Translation
Scenario:
UserA, userB and userC belong to VLAN1, VLAN2, VLAN3, respectively. Before entering the
network layer, data traffic of userA, userB and userC is translated into VLAN 100 by
Ethernet1/1 of edge switch1. Contrarily, data traffic of userA, userB and userC will be
translated into VLAN1, VLAN2, VLAN3 by Ethernet1/1 of edge switch1 from network layer
respectively. In the same way, it implements multi-to-one translation for userD, userE and
userF on Ethernet1/1 of edge switch2.
Figure 20-7: VLAN translation typical application
User’s Manual of SGS-6341 series