SGS-6341-Series User Manual

20-87
1. Configure the VLAN Translation of the port
Command Explanation
Port Mode
vlan-translation enable
no vlan-translation enable
Enter/exit the port VLAN translation
mode.
2. Configur
e the VLAN-translation relation of the port
Command Explanation
Global/Port Mode
vlan-translation <old-vlan-id> to
<new-vlan-id> in
no vlan-translation old-vlan-id in
Add/delete a VLAN translation relation.
3. Configur
e whether th
e packet is dropped when VLAN translation fails
Command Explanation
Port Mode
vlan-translation miss drop {in | out | both}
no vlan-translation miss drop {in | out |
both}
Configure the VLAN translation packet
dropped on port if there is any failure.
4.
Show the related configuration of VLAN translation
Command Explanation
Admin Mode
show vlan-translation
Show the related configuration of VLAN
translation.
20.4.3 Typical Application of VLAN Translation
Scenario:
Edge switches PE1 and PE2 of the ISP internet support the VLAN20 data task between CE1
and CE2 of the client network with VLAN3. The port1/1 of PE1 is connected to CE1; port1/10 is
connected to public network; port1/1 of PE2 is connected to CE2; port1/10 is connected to
public network.
User’s Manual of SGS-6341 series