SGS-6341-Series User Manual

20-78
20.1.4 Typical Application of Hybrid Port
Scenario:
Switch A
Switch B
internet
PC1 PC2
Figure 20-3: Typical Ap
plication of Hybrid Port
PC1 connects to the interface Ethernet 1/7 of Switch B; PC2 connects to the interface Ethernet
1/9 of Switch B; Ethernet 1/10 of Switch A connects to Ethernet 1/10 of Switch B. It is required
that PC1 and PC2 cannot mutually access due to reason of the security, but PC1 and PC2 can
access other network resources through the gateway Switch A. We can implement this status
through Hybrid port.
Configuration items are as follows:
Port Type PVID the VLANs are allowed to pass
Port 1/10 of Switch A Access 10 Allow the packets of VLAN 10 to pass
with untag method.
Port 1/10 of Switch B Hybrid 10 Allow the packets of VLAN 7, 9, 10 to
pass with untag method.
Port 1/7 of Switch B Hybrid 7 Allow the packets of VLAN 7, 10 to pass
with untag method.
Port 1/9 of Switch B Hybrid 9 Allow the packets of VLAN 9, 10 to pass
with untag method.
User’s Manual of SGS-6341 series