SGS-6341-Series User Manual

20-74
switchport trunk native vlan <vlan-id>
no switchport trunk native vlan
Set/delete PVID for Trunk port.
6. Set Access port
Command Explanation
Port Mode
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to the specified
VLAN. The “no” command restores the
default setting.
7. Set H
ybrid port
Command Explanation
Port Mode
switchport hybrid allowed vlan {WORD |
all | add WORD | except WORD | remove
WORD} {tag | untag}
no switchport hybrid allowed vlan
Set/delete the VLAN which is allowed by
Hybrid port with tag or untag mode.
switchport hybrid native vlan <vlan-id>
no switchport hybrid native vlan
Set/delete PVID of the port.
8. Disable/Enable VLAN Ingress
Rules
Command Explanation
Port Mode
vlan ingress enable
no vlan ingress enable
Enable/Disable VLAN ingress rules.
9. Configur
e Private VLAN
Command Explanation
VLAN Interface Mode
private-vlan {primary | isolated |
community}
no private-vlan
Configure current VLAN to Private VLAN.
The no command deletes private VLAN.
User’s Manual of SGS-6341 series