SGS-6341-Series User Manual

12-35
src-ip | dst-ip | dst-src-ip}
5. Set the s
ystem priority of LACP protocol
Command Explanation
Global Mode
lacp system-priority <system-priority>
no lacp system-priority
Set the system priority of LACP
protocol, the no command restores
the default value.
6. Set the po
rt priority of the current port in LACP
protocol
Command Explanation
Port Mode
lacp port-priority <port-priority>
no lacp port-priority
Set the port priority in LACP protocol.
The no command restores the default
value.
7. Set the ti
meout mode of the current port in LACP
protocol
Command Explanation
Port Mode
lacp timeout {short | long}
no lacp timeout
Set the timeout mode in LACP
protocol. The no command restores
the default value.
12.3 Port Channel Examples
Scenario 1: Configuring Port Channel in LACP.
S1
S2
Figure 12-2: Configure Port Channel in LACP
User’s Manual of SGS-6341 series