SGS-6341-Series User Manual

12-34
12.2.3 Port Channel Configuration Task List
1. Create a port group in Global Mode
2. Add ports to the specified group from the Port Mode of respective ports
3. Enter port-channel configuration mode
4. Set load-balance method for port-group
5. Set the system priority of LACP protocol
6. Set the port priority of the current port in LACP protocol
7. Set the timeout mode of the current port in LACP protocol
1. Creating a port group
Command Explanation
Global Mode
port-group <port-group-number>
no port-group <port-group-number>
Create or delete a port group.
2.
Add physical ports
to the port group
Command Explanation
Port Mode
port-group <port-group-number> mode
{active | passive | on}
no port-group
Add the ports to the port group and set their
mode.
3. Enter port-cha
nnel configuration mode.
Command Explanation
Global Mode
interface port-channel
<port-channel-number>
Enter port-channel configuration mode.
4. Set load-balance method for port-group
Command Explanation
Aggregation Port Mode
load-balance {src-mac | dst-mac | dst-src-mac | Set load-balance for port-group.
User’s Manual of SGS-6341 series