SGS-6341-Series Quick Guide

6
4. Terminal Setup
Tocongure the system,connectaserialcable toaCOMportona PCornotebook
computer and to serial (console) port of the Managed Switch. The console port
of the Managed Switch is DCE already, so that you can connect the console port
directlythroughPCwithouttheneedofNullModem.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1 Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.TeraTerm program maybe a good choice. The TeraTerm can be accessed
fromtheStart menu.
1. Click START menu, then Programs,andthenTera Term.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud:9600
z Parity:None
z Databits:8
z Stopbits:1
z Flowcontrol:None
Figure 4-2 Tera Term COM Port Conguration