Datasheet

SGS-6341-24T4X
2
IP Stacking
Up to 24 units with SGS-6341 Series
Slave
10G Fiber 10G Fiber
Master
Slave
• Supports Link Aggregation
–
Maximum 16 trunk groups, up to 8 ports per trunk group
–
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
–
Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
–
STP, IEEE 802.1D (Classic Spanning Tree Protocol)
–
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
–
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
–
Supports BPDU & root guard
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port (many to many)
• Provides port mirror (many-to-1)
Quality of Service
• 8 priority queues on all switch ports
• Support for strict priority and WRR (Weighted Round Robin)
CoS policies
• Trafcclassication
–
IEEE 802.1p CoS/ToS
–
IPv4/IPv6 DSCP
–
Port-based WRR
• Strict priority and WRR CoS policies
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and
v2 snooping
• Querier mode support
• Supports Multicast VLAN Register (MVR)
Security
• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IPSourceGuardpreventsIPspoongattacks
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
Layer 3 Routing Support
TheSGS-6341-24T4Xenablestheadministratortoconvenientlyboostnetworkefciency
by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol)
or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the
hop count as a routing metric and prevent routing loops by implementing a limit on
the number of hops allowed in a path from the source to a destination. The OSPF is
an interior dynamic routing protocol for autonomous system based on link state. The
protocol creates a database for link state by exchanging link states among Layer3
switches, and then uses the Shortest Path First algorithm to generate a route table
based on that database.
Full IPv6 Support
The SGS-6341-24T4X provides IPv6 management and enterprise-level secure features
such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to
step in the IPv6 era with the lowest investment. In addition, you don’t need to replace
the network facilities when the IPv6 FTTx edge network is built.
Robust Layer 2 Features
The SGS-6341-24T4X can be programmed for basic switch management functions
such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree
Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q
tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port
aggregation, the SGS-6341-24T4X allows the operation of a high-speed trunk combined
with multiple ports. It enables up to 16 groups for trunking with a maximum of 8 ports
for each group.
Excellent Layer 2 to Layer 4 Trafc Control
The SGS-6341-24T4X is loaded with powerful traffic management and WRR features
to enhance services offered by telecoms. The WRR functionalities include wire-speed
Layer4trafcclassiersandbandwidthlimitationwhichareparticularlyusefulformulti-
tenant unit, multi-business unit, Telco, or network service applications. It also empowers
the enterprises to take full advantage of the limited network resources and guarantees
the best in VoIP and video conferencing transmission.