User's Manual

SGS-6341 Series Command Guide
1-84
1.4.5 show snmp
Command:
show snmp
Function:
Display all SNMP counter information.
Command mode:
Admin and Configuration Mode.
Example:
Switch#show snmp
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Max packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
0 Get-response PDUs
0 SNMP trap PDUs
Displayed information Explanation
snmp packets input
Total number of SNMP packet inputs.
bad snmp version errors Number of version information error packets.
unknown community name
Number of community name error packets.
illegal operation for community name supplied Number of permission for community name error
packets.
encoding errors
Number of encoding error packets.