User's Manual
Table Of Contents
- Chapter 1 Commands for Basic Switch Configuration
- 1.1 Commands for Basic Configuration
- 1.1.1 Authentication line login
- 1.1.2 banner
- 1.1.3 boot img
- 1.1.4 boot startup-config
- 1.1.5 clock set
- 1.1.6 config
- 1.1.7 debug ssh-server
- 1.1.8 disable
- 1.1.9 enable
- 1.1.10 enable password
- 1.1.11 end
- 1.1.12 exec-timeout
- 1.1.13 exit
- 1.1.14 help
- 1.1.15 hostname
- 1.1.16 ip host
- 1.1.17 ipv6 host
- 1.1.18 ip http server
- 1.1.19 language
- 1.1.20 login
- 1.1.21 password
- 1.1.22 reload
- 1.1.23 service password-encryption
- 1.1.24 service terminal-length
- 1.1.25 sysContact
- 1.1.26 sysLocation
- 1.1.27 set default
- 1.1.28 setup
- 1.1.29 show clock
- 1.1.30 show cpu usage
- 1.1.31 show memory usage
- 1.1.32 show privilege
- 1.1.33 show temperature
- 1.1.34 show tech-support
- 1.1.35 show version
- 1.1.36 username
- 1.1.37 web language
- 1.1.38 write
- 1.2 Commands for Telnet
- 1.2.1 authentication ip access-class
- 1.2.2 authentication ipv6 access-class
- 1.2.3 authentication line login
- 1.2.4 authentication securityip
- 1.2.5 authentication securityipv6
- 1.2.6 authorization
- 1.2.7 terminal length
- 1.2.8 terminal monitor
- 1.2.9 telnet
- 1.2.10 telnet server enable
- 1.2.11 telnet-server max-connection
- 1.2.12 ssh-server authentication-retries
- 1.2.13 ssh-server enable
- 1.2.14 ssh-server host-key create rsa
- 1.2.15 ssh-server max-connection
- 1.2.16 ssh-server timeout
- 1.2.17 show ssh-server
- 1.2.18 show telnet login
- 1.2.19 who
- 1.3 Commands for Configuring Switch IP
- 1.4 Commands for SNMP
- 1.4.1 debug snmp mib
- 1.4.2 debug snmp kernel
- 1.4.3 rmon enable
- 1.4.4 show private-mib oid
- 1.4.5 show snmp
- 1.4.6 show snmp engineid
- 1.4.7 show snmp group
- 1.4.8 show snmp mib
- 1.4.9 show snmp status
- 1.4.10 show snmp user
- 1.4.11 show snmp view
- 1.4.12 snmp-server community
- 1.4.13 snmp-server enable
- 1.4.14 snmp-server enable traps
- 1.4.15 snmp-server engineid
- 1.4.16 snmp-server group
- 1.4.17 snmp-server host
- 1.4.18 snmp-server securityip
- 1.4.19 snmp-server securityip
- 1.4.20 snmp-server trap-source
- 1.4.21 snmp-server user
- 1.4.22 snmp-server view
- 1.5 Commands for Switch Upgrade
- 1.1 Commands for Basic Configuration
- Chapter 2 File System Commands
- Chapter 3 Commands for Cluster
- 3.1 clear cluster nodes
- 3.2 cluster auto-add
- 3.3 cluster commander
- 3.4 cluster ip-pool
- 3.5 cluster keepalive interval
- 3.6 cluster keepalive loss-count
- 3.7 cluster member
- 3.8 cluster member auto-to-user
- 3.9 cluster reset member
- 3.10 cluster run
- 3.11 cluster update member
- 3.12 debug cluster
- 3.13 debug cluster packets
- 3.14 show cluster
- 3.15 show cluster members
- 3.16 show cluster candidates
- 3.17 show cluster topology
- 3.18 rcommand commander
- 3.19 rcommand member
- Chapter 4 Commands for Network Port Configuration
- 4.1 Commands for Ethernet Port Configuration
- 4.1.1 bandwidth
- 4.1.2 combo-forced-mode
- 4.1.3 clear counters interface
- 4.1.4 flow control
- 4.1.5 interface ethernet
- 4.1.6 loopback
- 4.1.7 mdi
- 4.1.8 name
- 4.1.9 negotiation
- 4.1.10 port-rate-statistics interval
- 4.1.11 port-scan-mode
- 4.1.12 rate-suppression
- 4.1.13 rate-violation
- 4.1.14 show interface
- 4.1.15 shutdown
- 4.1.16 speed-duplex
- 4.1.17 virtual-cable-test
- 4.1 Commands for Ethernet Port Configuration
- Chapter 5 Commands for Port Isolation Function
- Chapter 6 Commands for Port Loopback Detection Function
- Chapter 7 Commands for ULDP
- Chapter 8 Commands for LLDP Function
- 8.1 clear lldp remote-table
- 8.2 debug lldp
- 8.3 debug lldp packets
- 8.4 lldp enable
- 8.5 lldp enable (Port)
- 8.6 lldp mode
- 8.7 lldp msgTxHold
- 8.8 lldp neighbors max-num
- 8.9 lldp notification interval
- 8.10 lldp tooManyNeighbors
- 8.11 lldp transmit delay
- 8.12 lldp transmit optional tlv
- 8.13 lldp trap
- 8.14 lldp tx-interval
- 8.15 show debugging lldp
- 8.16 show lldp
- 8.17 show lldp interface ethernet
- 8.18 show lldp neighbors interface ethernet
- 8.19 show lldp traffic
- Chapter 9 Commands for Port Channel
- Chapter 10 Commands for Jumbo
- Chapter 11 Commands for EFM OAM
- 11.1 clear ethernet-oam
- 11.2 debug ethernet-oam error
- 11.3 debug ethernet-oam fsm
- 11.4 debug ethernet-oam packet
- 11.5 debug ethernet-oam timer
- 11.6 ethernet-oam
- 11.7 ethernet-oam errored-frame threshold high
- 11.8 ethernet-oam errored-frame threshold low
- 11.9 ethernet-oam errored-frame window
- 11.10 ethernet-oam errored-frame-period threshold high
- 11.11 ethernet-oam errored-frame-period threshold low
- 11.12 ethernet-oam errored-frame-period window
- 11.13 ethernet-oam errored-frame-seconds threshold high
- 11.14 ethernet-oam errored-frame-seconds threshold low
- 11.15 ethernet-oam errored-frame-seconds window
- 11.16 ethernet-oam errored-symbol-period threshold high
- 11.17 ethernet-oam errored-symbol-period threshold low
- 11.18 ethernet-oam errored-symbol-period window
- 11.19 ethernet-oam link-monitor
- 11.20 ethernet-oam mode
- 11.21 ethernet-oam period
- 11.22 ethernet-oam remote-failure
- 11.23 ethernet-oam remote-loopback
- 11.24 ethernet-oam remote-loopback supported
- 11.25 ethernet-oam timeout
- 11.26 show ethernet-oam
- 11.27 show ethernet-oam events
- 11.28 show ethernet-oam link-events configuration
- 11.29 show ethernet-oam loopback status
- Chapter 12 VLAN Configuration
- 12.1 Commands for VLAN Configuration
- 12.1.1 debug gvrp event
- 12.1.2 debug gvrp packet
- 12.1.3 dot1q-tunnel enable
- 12.1.4 dot1q-tunnel tpid
- 12.1.5 garp timer join
- 12.1.6 garp timer leave
- 12.1.7 garp timer leaveall
- 12.1.8 gvrp (Global)
- 12.1.9 gvrp (Port)
- 12.1.10 no garp timer
- 12.1.11 name
- 12.1.12 private-vlan
- 12.1.13 private-vlan association
- 12.1.14 show dot1q-tunnel
- 12.1.15 show garp timer
- 12.1.16 show gvrp fsm information
- 12.1.17 show gvrp leaveAll fsm information
- 12.1.18 show gvrp leavetimer running
- 12.1.19 show gvrp port-member
- 12.1.20 show gvrp port registerd vlan
- 12.1.21 show gvrp timer running information
- 12.1.22 show gvrp vlan registerd port
- 12.1.23 show vlan
- 12.1.24 show vlan-translation
- 12.1.25 switchport access vlan
- 12.1.26 switchport forbidden vlan
- 12.1.27 switchport hybrid allowed vlan
- 12.1.28 switchport hybrid native vlan
- 12.1.29 switchport interface
- 12.1.30 switchport mode
- 12.1.31 switchport mode trunk allow-null
- 12.1.32 switchport trunk allowed vlan
- 12.1.33 switchport trunk native vlan
- 12.1.34 vlan
- 12.1.35 vlan internal
- 12.1.36 vlan ingress enable
- 12.1.37 vlan-translation
- 12.1.38 vlan-translation enable
- 12.1.39 vlan-translation miss drop
- 12.2 Commands for Dynamic VLAN Configuration
- 12.2.1 dynamic-vlan mac-vlan prefer
- 12.2.2 dynamic-vlan subnet-vlan prefer
- 12.2.3 mac-vlan
- 12.2.4 mac-vlan vlan
- 12.2.5 protocol-vlan
- 12.2.6 show dynamic-vlan prefer
- 12.2.7 show mac-vlan
- 12.2.8 show mac-vlan interface
- 12.2.9 show protocol-vlan
- 12.2.10 show subnet-vlan
- 12.2.11 show subnet-vlan interface
- 12.2.12 subnet-vlan
- 12.2.13 switchport mac-vlan enable
- 12.2.14 switchport subnet-vlan enable
- 12.3 Commands for Voice VLAN Configuration
- 12.1 Commands for VLAN Configuration
- Chapter 13 Commands for MAC Address Table Configuration
- 13.1 Commands for MAC Address Table Configuration
- 13.2 Commands for Mac Address Binding configuration
- 13.2.1 clear port-security dynamic
- 13.2.2 mac-address-table periodic-monitor-time
- 13.2.3 show port-security
- 13.2.4 show port-security address
- 13.2.5 show port-security interface
- 13.2.6 switchport port-security
- 13.2.7 switchport port-security convert
- 13.2.8 switchport port-security lock
- 13.2.9 switchport port-security mac-address
- 13.2.10 switchport port-security maximum
- 13.2.11 switchport port-security timeout
- 13.2.12 switchport port-security violation
- Chapter 14 ommands for MSTP
- 14.1 Commands for MSTP
- 14.1.1 abort
- 14.1.2 exit
- 14.1.3 instance vlan
- 14.1.4 name
- 14.1.5 no
- 14.1.6 revision-level
- 14.1.7 show
- 14.1.8 spanning-tree
- 14.1.9 spanning-tree cost
- 14.1.10 spanning-tree digest-snooping
- 14.1.11 spanning-tree format
- 14.1.12 spanning-tree forward-time
- 14.1.13 spanning-tree hello-time
- 14.1.14 spanning-tree link-type p2p
- 14.1.15 spanning-tree maxage
- 14.1.16 spanning-tree max-hop
- 14.1.17 spanning-tree mcheck
- 14.1.18 spanning-tree mode
- 14.1.19 spanning-tree mst configuration
- 14.1.20 spanning-tree mst cost
- 14.1.21 spanning-tree mst loopguard
- 14.1.22 spanning-tree mst port-priority
- 14.1.23 spanning-tree mst priority
- 14.1.24 spanning-tree mst rootguard
- 14.1.25 spanning-tree portfast
- 14.1.26 spanning-tree port-priority
- 14.1.27 spanning-tree priority
- 14.1.28 spanning-tree rootguard
- 14.1.29 spanning-tree tcflush (Global mode)
- 14.1.30 spanning-tree tcflush (Port mode)
- 14.1.31 spanning-tree transmit-hold-count
- 14.2 Commands for Monitor and Debug
- 14.1 Commands for MSTP
- Chapter 15 Commands for QoS and PBR
- 15.1 accounting
- 15.2 class
- 15.3 class-map
- 15.4 clear mls qos statistics
- 15.5 drop
- 15.6 match
- 15.7 mls qos aggregate-policy
- 15.8 mls qos cos
- 15.9 mls qos internal-priority
- 15.10 mls qos map
- 15.11 mls qos internal-priority
- 15.12 mls qos queue weight
- 15.13 mls qos trust
- 15.14 pass-through-cos
- 15.15 pass-through-dscp
- 15.16 policy
- 15.17 policy aggregate
- 15.18 policy-map
- 15.19 service-policy input
- 15.20 service-policy input vlan
- 15.21 set internal priority
- 15.22 show class-map
- 15.23 show policy-map
- 15.24 show mls qos interface
- 15.25 show mls qos maps
- 15.26 show mls qos vlan
- 15.27 show mls qos aggregate-policy
- 15.28 transmit
- Chapter 16 Commands for for Flow-based Redirection
- Chapter 17 Commands for Egress QoS
- Chapter 18 Commands for Flexible QinQ
- Chapter 19 Commands for Layer 3 Forwarding
- 19.1 Commands for Layer 3 Interface
- 19.2 Commands for IPv4/v6 configuration
- 19.2.1 clear ip traffic
- 19.2.2 clear ipv6 neighbor
- 19.2.3 debug ip icmp
- 19.2.4 debug ip packet
- 19.2.5 debug ipv6 packet
- 19.2.6 debug ipv6 icmp
- 19.2.7 debug ipv6 nd
- 19.2.8 debug ipv6 tunnel packet
- 19.2.9 description
- 19.2.10 ipv6 proxy enable
- 19.2.11 ip address
- 19.2.12 ipv6 address
- 19.2.13 ipv6 route
- 19.2.14 ipv6 redirect
- 19.2.15 ipv6 nd dad attempts
- 19.2.16 ipv6 nd ns-interval
- 19.2.17 ipv6 nd suppress-ra
- 19.2.18 ipv6 nd ra-lifetime
- 19.2.19 ipv6 nd min-ra-interval
- 19.2.20 ipv6 nd max-ra-interval
- 19.2.21 ipv6 nd prefix
- 19.2.22 ipv6 nd ra-hoplimit
- 19.2.23 ipv6 nd ra-mtu
- 19.2.24 ipv6 nd reachable-time
- 19.2.25 ipv6 nd retrans-timer
- 19.2.26 ipv6 nd other-config-flag
- 19.2.27 ipv6 nd managed-config-flag
- 19.2.28 ipv6 neighbor
- 19.2.29 interface tunnel
- 19.2.30 show ip interface
- 19.2.31 show ip traffic
- 19.2.32 show ipv6 interface
- 19.2.33 show ipv6 route
- 19.2.34 show ipv6 neighbors
- 19.2.35 show ipv6 traffic
- 19.2.36 show ipv6 redirect
- 19.2.37 show ipv6 tunnel
- 19.2.38 tunnel source
- 19.2.39 tunnel destination
- 19.2.40 tunnel nexthop
- 19.2.41 tunnel mode
- 19.3 Commands for IP Route Aggregation
- 19.4 Commands for URPF
- 19.5 Commands for ARP Configuration
- 19.6 Commands for Hardware Tunnel Capacity
- Chapter 20 Commands for ARP Scanning Prevention
- 20.1 anti-arpscan enable
- 20.2 anti-arpscan port-based threshold
- 20.3 anti-arpscan ip-based threshold
- 20.4 anti-arpscan trust
- 20.5 anti-arpscan trust ip
- 20.6 anti-arpscan recovery enable
- 20.7 anti-arpscan recovery time
- 20.8 anti-arpscan log enable
- 20.9 anti-arpscan trap enable
- 20.10 show anti-arpscan
- 20.11 debug anti-arpscan
- Chapter 21 Commands for Preventing ARP, ND Spoofing
- Chapter 22 Command for ARP GUARD
- Chapter 23 Command for ARP Local Proxy
- Chapter 24 Commands for Gratuitous ARP Configuration
- Chapter 25 Commands for Keepalive Gateway
- Chapter 26 Commands for DHCP
- 26.1 Commands for DHCP Server Configuration
- 26.1.1 bootfile
- 26.1.2 clear ip dhcp binding
- 26.1.3 clear ip dhcp conflict
- 26.1.4 clear ip dhcp server statistics
- 26.1.5 client-identifier
- 26.1.6 debug ip dhcp client
- 26.1.7 debug ip dhcp relay
- 26.1.8 debug ip dhcp server
- 26.1.9 default-router
- 26.1.10 dns-server
- 26.1.11 domain-name
- 26.1.12 hardware-address
- 26.1.13 host
- 26.1.14 ip dhcp conflict logging
- 26.1.15 ip dhcp excluded-address
- 26.1.16 ip dhcp pool
- 26.1.17 ip dhcp conflict ping-detection enable
- 26.1.18 ip dhcp ping packets
- 26.1.19 ip dhcp ping timeout
- 26.1.20 lease
- 26.1.21 netbios-name-server
- 26.1.22 netbios-node-type
- 26.1.23 network-address
- 26.1.24 next-server
- 26.1.25 option
- 26.1.26 service dhcp
- 26.1.27 show ip dhcp binding
- 26.1.28 show ip dhcp conflict
- 26.1.29 show ip dhcp relay information option
- 26.1.30 show ip dhcp server statistics
- 26.2 Commands for DHCP Relay Configuration
- 26.1 Commands for DHCP Server Configuration
- Chapter 27 Commands for DHCPv6
- 27.1 clear ipv6 dhcp binding
- 27.2 clear ipv6 dhcp conflict
- 27.3 clear ipv6 dhcp statistics
- 27.4 debug ipv6 dhcp client packet
- 27.5 debug ipv6 dhcp detail
- 27.6 debug ipv6 dhcp relay packet
- 27.7 debug ipv6 dhcp server
- 27.8 dns-server
- 27.9 domain-name
- 27.10 excluded-address
- 27.11 ipv6 address
- 27.12 ipv6 dhcp client pd
- 27.13 ipv6 dhcp client pd hint
- 27.14 ipv6 dhcp pool
- 27.15 ipv6 dhcp relay destination
- 27.16 ipv6 dhcp server
- 27.17 ipv6 general-prefix
- 27.18 ipv6 local pool
- 27.19 lifetime
- 27.20 network-address
- 27.21 prefix-delegation
- 27.22 prefix-delegation pool
- 27.23 service dhcpv6
- 27.24 show ipv6 dhcp
- 27.25 show ipv6 dhcp binding
- 27.26 show ipv6 dhcp conflict
- 27.27 show ipv6 dhcp interface
- 27.28 show ipv6 dhcp pool
- 27.29 show ipv6 dhcp statistics
- 27.30 show ipv6 general-prefix
- 27.31 show ipv6 local pool
- Chapter 28 Commands for DHCP Option 82
- 28.1 debug ip dhcp relay packet
- 28.2 ip dhcp relay information option
- 28.3 ip dhcp relay information option delimiter
- 28.4 ip dhcp relay information option remote-id
- 28.5 ip dhcp relay information option remote-id format
- 28.6 ip dhcp relay information option self-defined remote-id
- 28.7 ip dhcp relay information option self-defined remote-id format
- 28.8 ip dhcp relay information option self-defined subscriber-id
- 28.9 ip dhcp relay information option self-defined subscriber-id format
- 28.10 ip dhcp relay information option subscriber-id
- 28.11 ip dhcp relay information option subscriber-id format
- 28.12 ip dhcp relay information policy
- 28.13 ip dhcp server relay information enable
- 28.14 show ip dhcp relay information option
- Chapter 29 Commands for DHCPv6 option37, 38
- 29.1 Commands for DHCPv6 option37, 38
- 29.1.1 address range
- 29.1.2 class
- 29.1.3 ipv6 dhcp class
- 29.1.4 ipv6 dhcp relay remote-id
- 29.1.5 ipv6 dhcp relay remote-id option
- 29.1.6 ipv6 dhcp relay subscriber-id
- 29.1.7 ipv6 dhcp relay subscriber-id option
- 29.1.8 ipv6 dhcp relay subscriber-id select delimiter
- 29.1.9 ipv6 dhcp server remote-id option
- 29.1.10 ipv6 dhcp server select relay-forw
- 29.1.11 ipv6 dhcp server subscriber-id option
- 29.1.12 ipv6 dhcp snooping remote-id
- 29.1.13 ipv6 dhcp snooping remote-id option
- 29.1.14 ipv6 dhcp snooping remote-id policy
- 29.1.15 ipv6 dhcp snooping subscriber-id
- 29.1.16 ipv6 dhcp snooping subscriber-id option
- 29.1.17 ipv6 dhcp snooping subscriber-id policy
- 29.1.18 ipv6 dhcp snooping subscriber-id select delimiter
- 29.1.19 ipv6 dhcp use class
- 29.1.20 remote-id subscriber-id
- 29.2 Commands for Monitoring and Debugging
- 29.1 Commands for DHCPv6 option37, 38
- Chapter 30 Commands for DHCP Snooping
- 30.1 debug ip dhcp snooping binding
- 30.2 debug ip dhcp snooping event
- 30.3 debug ip dhcp snooping packet
- 30.4 debug ip dhcp snooping packet interface
- 30.5 debug ip dhcp snooping update
- 30.6 enable trustview key
- 30.7 ip dhcp snooping
- 30.8 ip dhcp snooping action
- 30.9 ip dhcp snooping action MaxNum
- 30.10 ip dhcp snooping binding
- 30.11 ip dhcp snooping binding arp
- 30.12 ip dhcp snooping binding dot1x
- 30.13 ip dhcp snooping binding user
- 30.14 ip dhcp snooping binding user-control
- 30.15 ip dhcp snooping binding user-control max-user
- 30.16 ip dhcp snooping information enable
- 30.17 ip dhcp snooping information option allow-untrusted
- 30.18 ip dhcp snooping information option delimiter
- 30.19 ip dhcp snooping information option remote-id
- 30.20 ip dhcp snooping information option self-defined remote-id
- 30.21 ip dhcp snooping information option self-defined remote-id format
- 30.22 ip dhcp snooping information option self-defined subscriber-id
- 30.23 ip dhcp snooping information option self-defined subscriber-id format
- 30.24 ip dhcp snooping information option subscriber-id
- 30.25 ip dhcp snooping information option subscriber-id format
- 30.26 ip dhcp snooping limit-rate
- 30.27 ip dhcp snooping trust
- 30.28 ip user helper-address
- 30.29 ip user private packet version two
- 30.30 show ip dhcp snooping
- 30.31 show ip dhcp snooping binding all
- 30.32 show trustview status
- Chapter 31 Commands for Routing Policy
- 31.1 ip prefix-list description
- 31.2 ip prefix-list seq
- 31.3 ip prefix-list sequence-number
- 31.4 match as-path
- 31.5 match community
- 31.6 match interface
- 31.7 match ip
- 31.8 match ipv6 address
- 31.9 match ipv6 next-hop
- 31.10 match metric
- 31.11 match origin
- 31.12 match route-type
- 31.13 match tag
- 31.14 route-map
- 31.15 set aggregator
- 31.16 set as-path
- 31.17 set atomic-aggregate
- 31.18 set comm-list
- 31.19 set community
- 31.20 set extcommunity
- 31.21 set ip next-hop
- 31.22 set local-preference
- 31.23 set metric
- 31.24 set metric-type
- 31.25 set origin
- 31.26 set originator-id
- 31.27 set tag
- 31.28 set vpnv4 next-hop
- 31.29 set weight
- 31.30 show ip prefix-list
- 31.31 show ip prefix-list
- 31.32 show route-map
- 31.33 show router-id
- Chapter 32 Commands for Static Route
- Chapter 33 Commands for RIP
- 33.1 accept-lifetime
- 33.2 address-family ipv4
- 33.3 clear ip rip route
- 33.4 debug rip
- 33.5 debug rip redistribute message send
- 33.6 debug rip redistribute route receive
- 33.7 default-information originate
- 33.8 default-metric
- 33.9 distance
- 33.10 distribute-list
- 33.11 exit-address-family
- 33.12 ip rip aggregate-address
- 33.13 ip rip authentication key-chain
- 33.14 ip rip authentication mode
- 33.15 ip rip authentication string
- 33.16 ip rip authentication cisco-compatible
- 33.17 ip rip receive-packet
- 33.18 ip rip receive version
- 33.19 ip rip send-packet
- 33.20 ip rip send version
- 33.21 ip rip split-horizon
- 33.22 key
- 33.23 key chain
- 33.24 key-string
- 33.25 maximum-prefix
- 33.26 neighbor
- 33.27 network
- 33.28 offset-list
- 33.29 passive-interface
- 33.30 recv-buffer-size
- 33.31 redistribute
- 33.32 route
- 33.33 router rip
- 33.34 send-lifetime
- 33.35 show debugging rip
- 33.36 show ip protocols rip
- 33.37 show ip rip
- 33.38 show ip rip database
- 33.39 show ip rip interface
- 33.40 show ip rip aggregate
- 33.41 timers basic
- 33.42 version
- Chapter 34 Commands for RIPng
- 34.1 clear ipv6 route
- 34.2 default-information originate
- 34.3 default-metric
- 34.4 distance
- 34.5 distribute-list
- 34.6 debug ipv6 rip
- 34.7 debug ipv6 rip redistribute message send
- 34.8 debug ipv6 rip redistribute route receive
- 34.9 ipv6 rip aggregate-address
- 34.10 ipv6 rip split-horizon
- 34.11 ipv6 router rip
- 34.12 neighbor
- 34.13 offset-list
- 34.14 passive-interface
- 34.15 redistribute
- 34.16 redistribute ospf
- 34.17 route
- 34.18 router ipv6 rip
- 34.19 show debugging ipv6 rip
- 34.20 show ipv6 rip interface
- 34.21 show ipv6 rip redistribute
- 34.22 show ipv6 protocols rip
- 34.23 show ipv6 rip
- 34.24 show ipv6 rip database
- 34.25 show ipv6 rip aggregate
- 34.26 show ipv6 rip redistribute
- 34.27 timers basic
- Chapter 35 Commands for OSPF
- 35.1 area authentication
- 35.2 area default-cost
- 35.3 area filter-list
- 35.4 area nssa
- 35.5 area range
- 35.6 area stub
- 35.7 area virtual-link
- 35.8 auto-cost reference-bandwidth
- 35.9 compatible rfc1583
- 35.10 clear ip ospf process
- 35.11 debug ospf events
- 35.12 debug ospf ifsm
- 35.13 debug ospf lsa
- 35.14 debug ospf nfsm
- 35.15 debug ospf nsm
- 35.16 debug ospf packet
- 35.17 debug ospf route
- 35.18 debug ospf redistribute message send
- 35.19 debug ospf redistribute route receive
- 35.20 default-information originate
- 35.21 default-metric
- 35.22 distance
- 35.23 distribute-list
- 35.24 filter-policy
- 35.25 host area
- 35.26 ip ospf authentication
- 35.27 ip ospf authentication-key
- 35.28 ip ospf cost
- 35.29 ip ospf database-filter
- 35.30 ip ospf dead-interval
- 35.31 ip ospf disable all
- 35.32 ip ospf hello-interval
- 35.33 ip ospf message-digest-key
- 35.34 ip ospf mtu
- 35.35 ip ospf mtu-ignore
- 35.36 ip ospf network
- 35.37 ip ospf priority
- 35.38 ip ospf retransmit-interval
- 35.39 ip ospf transmit-delay
- 35.40 key
- 35.41 key chain
- 35.42 log-adjacency-changes detail
- 35.43 max-concurrent-dd
- 35.44 neighbor
- 35.45 network area
- 35.46 ospf abr-type
- 35.47 ospf router-id
- 35.48 overflow database
- 35.49 overflow database external
- 35.50 passive-interface
- 35.51 redistribute
- 35.52 redistribute ospf
- 35.53 router ospf
- 35.54 show ip ospf
- 35.55 show ip ospf border-routers
- 35.56 show ip ospf database
- 35.57 show ip ospf interface
- 35.58 show ip ospf neighbor
- 35.59 show ip ospf redistribute
- 35.60 show ip ospf route
- 35.61 show ip ospf virtual-links
- 35.62 show ip route process-detail
- 35.63 show ip protocols
- 35.64 summary-address
- 35.65 timers spf
- Chapter 36 Commands for OSPFv3
- 36.1 area default cost
- 36.2 area range
- 36.3 area stub
- 36.4 area virtual-link
- 36.5 abr-type
- 36.6 default-metric
- 36.7 debug ipv6 ospf events
- 36.8 debug ipv6 ospf ifsm
- 36.9 debug ipv6 ospf lsa
- 36.10 debug ipv6 ospf nfsm
- 36.11 debug ipv6 ospf nsm
- 36.12 debug ipv6 ospf packet
- 36.13 debug ipv6 ospf redistribute message send
- 36.14 debug ipv6 ospf redistribute route receive
- 36.15 debug ipv6 ospf route
- 36.16 ipv6 ospf cost
- 36.17 ipv6 ospf dead-interval
- 36.18 ipv6 ospf display route single-line
- 36.19 ipv6 ospf hello-interval
- 36.20 ipv6 ospf priority
- 36.21 ipv6 ospf retransmit-interval
- 36.22 ipv6 ospf transmit-delay
- 36.23 ipv6 router ospf
- 36.24 max-concurrent-dd
- 36.25 passive-interface
- 36.26 redistribute
- 36.27 redistribute ospf
- 36.28 router-id
- 36.29 router ipv6 ospf
- 36.30 show ipv6 ospf
- 36.31 show ipv6 ospf database
- 36.32 show ipv6 ospf interface
- 36.33 show ipv6 ospf neighbor
- 36.34 show ipv6 ospf route
- 36.35 show ipv6 ospf redistribute
- 36.36 show ipv6 ospf topology
- 36.37 show ipv6 ospf virtual-links
- 36.38 show ipv6 route process-detail
- 36.39 timers spf
- Chapter 37 Commands for BGP and MBGP4+
- 37.1 address-family
- 37.2 aggregate-address
- 37.3 bgp aggregate-nexthop-check
- 37.4 bgp always-compare-med
- 37.5 bgp asnotation asdot
- 37.6 bgp bestpath as-path ignore
- 37.7 bgp bestpath compare-confed-aspath
- 37.8 bgp bestpath compare-routerid
- 37.9 bgp bestpath med
- 37.10 bgp client-to-client reflection
- 37.11 bgp cluster-id
- 37.12 bgp confederation identifier
- 37.13 bgp confederation peers
- 37.14 bgp dampening
- 37.15 bgp default
- 37.16 bgp deterministic-med
- 37.17 bgp enforce-first-as
- 37.18 bgp fast-external-failover
- 37.19 bgp inbound-route-filter
- 37.20 bgp inbound-max-route-num
- 37.21 bgp log-neighbor-changes
- 37.22 bgp network import-check
- 37.23 bgp rfc1771-path-select
- 37.24 bgp rfc1771-strict
- 37.25 bgp router-id
- 37.26 bgp scan-time
- 37.27 clear ip bgp
- 37.28 clear ip bgp dampening
- 37.29 clear ip bgp flap-statistics
- 37.30 debug bgp
- 37.31 debug bgp redistribute message send
- 37.32 debug bgp redistribute route receive
- 37.33 debug ipv6 bgp redistribute message send
- 37.34 debug ipv6 bgp redistribute route receive
- 37.35 distance
- 37.36 distance bgp
- 37.37 exit-address-family
- 37.38 import map
- 37.39 ip as-path access-list
- 37.40 ip community-list
- 37.41 ip extcommunity-list
- 37.42 neighbor activate
- 37.43 neighbor advertisement-interval
- 37.44 neighbor allowas-in
- 37.45 neighbor as-override
- 37.46 neighbor attribute-unchanged
- 37.47 neighbor capability
- 37.48 neighbor capability orf prefix-list
- 37.49 neighbor collide-established
- 37.50 neighbor default-originate
- 37.51 neighbor description
- 37.52 neighbor distribute-list
- 37.53 neighbor dont-capability-negotiate
- 37.54 neighbor ebgp-multihop
- 37.55 neighbor enforce-multihop
- 37.56 neighbor filter-list
- 37.57 neighbor interface
- 37.58 neighbor maximum-prefix
- 37.59 neighbor next-hop-self
- 37.60 neighbor override-capability
- 37.61 neighbor passive
- 37.62 neighbor peer-group (Creating)
- 37.63 neighbor peer-group (Configuring group members)
- 37.64 neighbor port
- 37.65 neighbor prefix-list
- 37.66 neighbor remote-as
- 37.67 neighbor remove-private-AS
- 37.68 neighbor route-map
- 37.69 neighbor route-reflector-client
- 37.70 neighbor route-server-client
- 37.71 neighbor send-community
- 37.72 neighbor shutdown
- 37.73 neighbor soft-reconfiguration inbound
- 37.74 neighbor soo
- 37.75 neighbor strict-capability-match
- 37.76 neighbor timers
- 37.77 neighbor timers connect
- 37.78 neighbor unsuppress-map
- 37.79 neighbor update-source
- 37.80 neighbor version 4
- 37.81 neighbor weight
- 37.82 network (BGP)
- 37.83 redistribute (BGP)
- 37.84 redistribute ospf
- 37.85 redistribute ospf (MBGP4+)
- 37.86 router bgp
- 37.87 set vpnv4 next-hop
- 37.88 show ip bgp
- 37.89 show ip bgp attribute-info
- 37.90 show ip bgp community
- 37.91 show ip bgp community-info
- 37.92 show ip bgp community-list
- 37.93 show ip bgp dampening
- 37.94 show ip bgp filter-list
- 37.95 show ip bgp inconsistent-as
- 37.96 show ip bgp neighbors
- 37.97 show ip bgp paths
- 37.98 show ip bgp prefix-list
- 37.99 show ip bgp quote-regexp
- 37.100 show ip bgp regexp
- 37.101 show ip bgp route-map
- 37.102 show ip bgp scan
- 37.103 show ip bgp summary
- 37.104 show ip bgp view
- 37.105 show ip bgp view neighbors
- 37.106 show ip bgp vrf
- 37.107 show ip bgp vpnv4
- 37.108 show ipv6 bgp redistribute
- 37.109 timers bgp
- Chapter 38 Commands for Black Hole Routing
- Chapter 39 Commands for GRE Tunnel Configuration
- 39.1 debug gre
- 39.2 ip address
- 39.3 ip route
- 39.4 ipv6 address
- 39.5 ipv6 route
- 39.6 loopback-group (Global)
- 39.7 loopback-group (Port)
- 39.8 loopback-group (Tunnel Interface)
- 39.9 show gre tunnel
- 39.10 show interface tunnel
- 39.11 tunnel destination
- 39.12 tunnel mode gre ip
- 39.13 tunnel mode gre ipv6
- 39.14 tunnel source
- Chapter 40 Commands for ECMP
- Chapter 41 Commands for BFD
- 41.1 bfd authentication key
- 41.2 bfd authentication key md5
- 41.3 bfd authentication key text
- 41.4 bfd echo
- 41.5 bfd echo-source-ip
- 41.6 bfd echo-source-ipv6
- 41.7 bfd enable
- 41.8 bfd interval
- 41.9 bfd min-echo-recv-interval
- 41.10 bfd mode
- 41.11 debug bfd
- 41.12 ip ospf bfd enable
- 41.13 ip route bfd
- 41.14 ipv6 ospf bfd enable
- 41.15 ipv6 ospf bfd enable instance-id
- 41.16 ipv6 rip bfd enable
- 41.17 ipv6 route bfd
- 41.18 neighbor
- 41.19 rip bfd enable
- 41.20 show bfd neighbor
- Chapter 42 Commands for BGP GR
- Chapter 43 Commands for OSPF GR
- Chapter 44 IPv4 Multicast Protocol
- 44.1 Public Commands for Multicast
- 44.2 Commands for PIM-DM
- 44.2.1 debug pim timer sat
- 44.2.2 debug pim timer srt
- 44.2.3 ip mroute
- 44.2.4 ip pim bsr-border
- 44.2.5 ip pim dense-mode
- 44.2.6 ip pim dr-priority
- 44.2.7 ip pim exclude-genid
- 44.2.8 ip pim hello-holdtime
- 44.2.9 ip pim hello-interval
- 44.2.10 ip pim multicast-routing
- 44.2.11 ip pim neighbor-filter
- 44.2.12 ip pim scope-border
- 44.2.13 ip pim state-refresh origination-interval
- 44.2.14 show ip pim interface
- 44.2.15 show ip pim mroute dense-mode
- 44.2.16 show ip pim neighbor
- 44.2.17 show ip pim nexthop
- 44.3 Commands for PIM-SM
- 44.3.1 clear ip pim bsr rp-set
- 44.3.2 debug pim event
- 44.3.3 debug pim mfc
- 44.3.4 debug pim mib
- 44.3.5 debug pim nexthop
- 44.3.6 debug pim nsm
- 44.3.7 debug pim packet
- 44.3.8 debug pim state
- 44.3.9 debug pim timer
- 44.3.10 ip mroute
- 44.3.11 ip multicast unresolved-cache aging-time
- 44.3.12 ip pim accept-register
- 44.3.13 ip pim bsr-border
- 44.3.14 ip pim bsr-candidate
- 44.3.15 ip pim cisco-register-checksum
- 44.3.16 ip pim dr-priority
- 44.3.17 ip pim exclude-genid
- 44.3.18 ip pim hello-holdtime
- 44.3.19 ip pim hello-interval
- 44.3.20 ip pim ignore-rp-set-priority
- 44.3.21 ip pim jp-timer
- 44.3.22 ip pim multicast-routing
- 44.3.23 ip pim neighbor-filter
- 44.3.24 ip pim register-rate-limit
- 44.3.25 ip pim register-rp-reachability
- 44.3.26 ip pim register-source
- 44.3.27 ip pim register-suppression
- 44.3.28 ip pim rp-address
- 44.3.29 ip pim rp-candidate
- 44.3.30 ip pim rp-register-kat
- 44.3.31 ip pim scope-border
- 44.3.32 ip pim sparse-mode
- 44.3.33 show ip pim bsr-router
- 44.3.34 show ip pim interface
- 44.3.35 show ip pim mroute sparse-mode
- 44.3.36 show ip pim neighbor
- 44.3.37 show ip pim nexthop
- 44.3.38 show ip pim rp-hash
- 44.3.39 show ip pim rp mapping
- 44.4 Commands for MSDP Configuration
- 44.4.1 cache-sa-holdtime
- 44.4.2 cache-sa-maximum
- 44.4.3 cache-sa-state
- 44.4.4 clear msdp peer
- 44.4.5 clear msdp sa-cache
- 44.4.6 clear msdp statistics
- 44.4.7 connect-source
- 44.4.8 debug msdp all
- 44.4.9 debug msdp events
- 44.4.10 debug msdp filter
- 44.4.11 debug msdp fsm
- 44.4.12 debug msdp keepalive
- 44.4.13 debug msdp nsm
- 44.4.14 debug msdp packet
- 44.4.15 debug msdp peer
- 44.4.16 debug msdp timer
- 44.4.17 default-rpf-peer
- 44.4.18 description
- 44.4.19 exit-peer-mode
- 44.4.20 mesh-group
- 44.4.21 originating-rp
- 44.4.22 peer
- 44.4.23 redistribute
- 44.4.24 remote-as
- 44.4.25 router msdp
- 44.4.26 sa-filter
- 44.4.27 sa-request
- 44.4.28 sa-request-filter
- 44.4.29 show msdp global
- 44.4.30 show msdp local-sa-cache
- 44.4.31 show msdp peer
- 44.4.32 show msdp sa-cache
- 44.4.33 show msdp sa-cache summary
- 44.4.34 show msdp statistics
- 44.4.35 show msdp summary
- 44.4.36 shutdown
- 44.4.37 ttl-threshold
- 44.5 Commands for ANYCAST RP v4
- 44.6 Commands for PIM-SSM
- 44.7 Commands for DVMRP
- 44.7.1 debug dvmrp
- 44.7.2 ip dvmrp enable
- 44.7.3 ip dvmrp metric
- 44.7.4 ip dvmrp multicast-routing
- 44.7.5 ip dvmrp output-report-delay
- 44.7.6 ip dvmrp reject-non-pruners
- 44.7.7 ip dvmrp tunnel
- 44.7.8 show ip dvmrp
- 44.7.9 show ip dvmrp interface
- 44.7.10 show ip dvmrp neighbor
- 44.7.11 show ip dvmrp prune
- 44.7.12 show ip dvmrp route
- 44.8 Commands for DCSCM
- 44.8.1 access-list (Multicast Destination Control)
- 44.8.2 access-list (Multicast Source Control)
- 44.8.3 ip multicast destination-control access-group
- 44.8.4 ip multicast destination-control access-group (sip)
- 44.8.5 ip multicast destination-control access-group (vmac)
- 44.8.6 ip multicast policy
- 44.8.7 ip multicast source-control
- 44.8.8 ip multicast source-control access-group
- 44.8.9 multicast destination-control
- 44.8.10 show ip multicast destination-control
- 44.8.11 show ip multicast destination-control access-list
- 44.8.12 show ip multicast policy
- 44.8.13 show ip multicast source-control
- 44.8.14 show ip multicast source-control access-list
- 44.9 Commands for IGMP
- 44.9.1 clear ip igmp group
- 44.9.2 debug igmp event
- 44.9.3 debug igmp packet
- 44.9.4 ip igmp access-group
- 44.9.5 ip igmp immediate-leave
- 44.9.6 ip igmp join-group
- 44.9.7 ip igmp last-member-query-interval
- 44.9.8 ip igmp limit
- 44.9.9 ip igmp query-interval
- 44.9.10 ip igmp query-max-response-time
- 44.9.11 ip igmp query-timeout
- 44.9.12 ip igmp robust-variable
- 44.9.13 ip igmp static-group
- 44.9.14 ip igmp version
- 44.9.15 show ip igmp groups
- 44.9.16 show ip igmp interface
- 44.10 Commands for IGMP Snooping
- 44.10.1 clear ip igmp snooping vlan
- 44.10.2 clear ip igmp snooping vlan <1-4094> mrouter-port
- 44.10.3 debug igmp snooping all/packet/event/timer/mfc
- 44.10.4 ip igmp snooping
- 44.10.5 ip igmp snooping proxy
- 44.10.6 ip igmp snooping vlan
- 44.10.7 ip igmp snooping vlan immediate-leave
- 44.10.8 ip igmp snooping vlan l2-general-querier
- 44.10.9 ip igmp snooping vlan l2-general-querier-source
- 44.10.10 ip igmp snooping vlan l2-general-querier-version
- 44.10.11 ip igmp snooping vlan limit
- 44.10.12 ip igmp snooping vlan mrouter-port interface
- 44.10.13 ip igmp snooping vlan mrouter-port learnpim
- 44.10.14 ip igmp snooping vlan mrpt
- 44.10.15 ip igmp snooping vlan query-interval
- 44.10.16 ip igmp snooping vlan query-mrsp
- 44.10.17 ip igmp snooping vlan query-robustness
- 44.10.18 ip igmp snooping vlan report source-address
- 44.10.19 ip igmp snooping vlan specific-query-mrsp
- 44.10.20 ip igmp snooping vlan static-group
- 44.10.21 ip igmp snooping vlan suppression-query-time
- 44.10.22 show ip igmp snooping
- 44.11 Commands for IGMP Proxy
- 44.11.1 clear ip igmp proxy agggroup
- 44.11.2 debug igmp proxy all
- 44.11.3 debug igmp proxy event
- 44.11.4 debug igmp proxy mfc
- 44.11.5 debug igmp proxy packet
- 44.11.6 debug igmp proxy timer
- 44.11.7 ip igmp proxy
- 44.11.8 ip igmp proxy aggregate
- 44.11.9 ip igmp proxy downstream
- 44.11.10 ip igmp proxy limit
- 44.11.11 ip igmp proxy multicast-source
- 44.11.12 ip igmp proxy unsolicited-report interval
- 44.11.13 ip igmp proxy unsolicited-report robustness
- 44.11.14 ip igmp proxy upstream
- 44.11.15 ip multicast ssm
- 44.11.16 ip pim bsr-border
- 44.11.17 show debugging igmp proxy
- 44.11.18 show ip igmp proxy
- 44.11.19 show ip igmp proxy mroute
- 44.11.20 show ip igmp proxy upstream groups
- Chapter 45 IPv6 Multicast Protocol
- 45.1 Public Commands for Multicast
- 45.2 Commands for PIM-DM6
- 45.2.1 debug ipv6 pim timer sat
- 45.2.2 debug ipv6 pim timer srt
- 45.2.3 ipv6 mroute
- 45.2.4 ipv6 pim bsr-border
- 45.2.5 ipv6 pim dense-mode
- 45.2.6 ipv6 pim dr-priority
- 45.2.7 ipv6 pim exclude-genid
- 45.2.8 ipv6 pim hello-holdtime
- 45.2.9 ipv6 pim hello-interval
- 45.2.10 ipv6 pim multicast-routing
- 45.2.11 ipv6 pim neighbor-filter
- 45.2.12 ipv6 pim scope-border
- 45.2.13 ipv6 pim state-refresh origination-interval
- 45.2.14 show ipv6 pim interface
- 45.2.15 show ipv6 pim mroute dense-mode
- 45.2.16 show ipv6 pim neighbor
- 45.2.17 show ipv6 pim nexthop
- 45.3 Commands for PIM-SM6
- 45.3.1 clear ipv6 pim bsr rp-set
- 45.3.2 debug ipv6 pim events
- 45.3.3 debug ipv6 pim mfc
- 45.3.4 debug ipv6 pim mib
- 45.3.5 debug ipv6 pim nexthop
- 45.3.6 debug ipv6 pim nsm
- 45.3.7 debug ipv6 pim packet
- 45.3.8 debug ipv6 pim state
- 45.3.9 debug ipv6 pim timer
- 45.3.10 ipv6 mroute
- 45.3.11 ipv6 multicast unresolved-cache aging-time
- 45.3.12 ipv6 pim accept-register
- 45.3.13 ipv6 pim bsr-border
- 45.3.14 ipv6 pim bsr-candidate
- 45.3.15 ipv6 pim cisco-register-checksum
- 45.3.16 ipv6 pim dr-priority
- 45.3.17 ipv6 pim exclude-genid
- 45.3.18 ipv6 pim hello-holdtime
- 45.3.19 ipv6 pim hello-interval
- 45.3.20 ipv6 pim ignore-rp-set-priority
- 45.3.21 ipv6 pim jp-timer
- 45.3.22 ipv6 pim multicast-routing
- 45.3.23 ipv6 pim neighbor-filter
- 45.3.24 ipv6 pim register-rate-limit
- 45.3.25 ipv6 pim register-rp-reachability
- 45.3.26 ipv6 pim register-source
- 45.3.27 ipv6 pim register-suppression
- 45.3.28 ipv6 pim rp-address
- 45.3.29 ipv6 pim rp-candidate
- 45.3.30 ipv6 pim rp-register-kat
- 45.3.31 ipv6 pim scope-border
- 45.3.32 ipv6 pim sparse-mode
- 45.3.33 show ipv6 pim bsr-router
- 45.3.34 show ipv6 pim interface
- 45.3.35 show ipv6 pim mroute sparse-mode
- 45.3.36 show ipv6 pim neighbor
- 45.3.37 show ipv6 pim nexthop
- 45.3.38 show ipv6 pim rp-hash
- 45.3.39 show ipv6 pim rp mapping
- 45.4 Commands for ANYCAST RP v6
- 45.4.1 debug ipv6 pim anycast-rp
- 45.4.2 ipv6 pim anycast-rp
- 45.4.3 ipv6 pim anycast-rp
- 45.4.4 ipv6 pim anycast-rp self-rp-address
- 45.4.5 ipv6 pim rp-candidate
- 45.4.6 show debugging ipv6 pim
- 45.4.7 show ipv6 pim anycast-rp first-hop
- 45.4.8 show ipv6 pim anycast-rp non-first-hop
- 45.4.9 show ipv6 pim anycast-rp status
- 45.5 Commands for PIM-SSM6
- 45.6 Commands for IPv6 DCSCM
- 45.6.1 ipv6 access-list(ipv6 multicast source control)
- 45.6.2 ipv6 access-list(multicast destination control)
- 45.6.3 ipv6 multicast destination-control access-group
- 45.6.4 ipv6 multicast destination-control access-group (sip)
- 45.6.5 ipv6 multicast destination-control access-group (vmac)
- 45.6.6 ipv6 multicast policy
- 45.6.7 ipv6 multicast source-control
- 45.6.8 ipv6 multicast source-control access-group
- 45.6.9 multicast destination-control
- 45.6.10 show ipv6 multicast destination-control
- 45.6.11 show ipv6 multicast destination-control access-list
- 45.6.12 show ipv6 multicast policy
- 45.6.13 show ipv6 multicast source-control
- 45.6.14 show ipv6 multicast source-control access-list
- 45.7 Commands for MLD
- 45.7.1 clear ipv6 mld group
- 45.7.2 debug ipv6 mld events
- 45.7.3 debug ipv6 mld packet
- 45.7.4 ipv6 mld access-group
- 45.7.5 ipv6 mld immediate-leave
- 45.7.6 ipv6 mld join-group
- 45.7.7 ipv6 mld join-group mode source
- 45.7.8 ipv6 mld last-member-query-interval
- 45.7.9 ipv6 mld limit
- 45.7.10 ipv6 mld query-interval
- 45.7.11 ipv6 mld query-max-response-time
- 45.7.12 ipv6 mld query-timeout
- 45.7.13 ipv6 mld static-group
- 45.7.14 ipv6 mld version
- 45.7.15 show ipv6 mld groups
- 45.7.16 show ipv6 mld interface
- 45.7.17 show ipv6 mld join-group
- 45.8 Commands for MLD Snooping Configuration
- 45.8.1 clear ipv6 mld snooping vlan
- 45.8.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
- 45.8.3 debug mld snooping all/packet/event/timer/mfc
- 45.8.4 ipv6 mld snooping
- 45.8.5 ipv6 mld snooping vlan
- 45.8.6 ipv6 mld snooping vlan immediate-leave
- 45.8.7 ipv6 mld snooping vlan l2-general-querier
- 45.8.8 ipv6 mld snooping vlan limit
- 45.8.9 ipv6 mld snooping vlan mrouter-port interface
- 45.8.10 ipv6 mld snooping vlan mrouter-port learnpim6
- 45.8.11 ipv6 mld snooping vlan mrpt
- 45.8.12 ipv6 mld snooping vlan query-interval
- 45.8.13 ipv6 mld snooping vlan query-mrsp
- 45.8.14 ipv6 mld snooping vlan query-robustness
- 45.8.15 ipv6 mld snooping vlan static-group
- 45.8.16 ipv6 mld snooping vlan suppression-query-time
- 45.8.17 show ipv6 mld snooping
- Chapter 46 Commands for Multicast VLAN
- Chapter 47 Commands for ACL
- 47.1 absolute-periodic/periodic
- 47.2 absolute start
- 47.3 access-list (ip extended)
- 47.4 access-list (ip standard)
- 47.5 access-list(mac extended)
- 47.6 access-list(mac-ip extended)
- 47.7 access-list(mac standard)
- 47.8 clear access-group (in | out) statistic interface
- 47.9 firewall
- 47.10 ip access extended
- 47.11 ip access standard
- 47.12 ipv6 access-list
- 47.13 ipv6 access standard
- 47.14 ipv6 access extended
- 47.15 {ip|ipv6|mac|mac-ip} access-group
- 47.16 mac access extended
- 47.17 mac-ip access extended
- 47.18 permit | deny (ip extended)
- 47.19 permit | deny(ip standard)
- 47.20 permit | deny(ipv6 extended)
- 47.21 permit | deny(ipv6 standard)
- 47.22 permit | deny(mac extended)
- 47.23 permit | deny(mac-ip extended)
- 47.24 show access-lists
- 47.25 show access-group
- 47.26 show firewall
- 47.27 show ipv6 access-lists
- 47.28 show time-range
- 47.29 time-range
- Chapter 48 Commands for 802.1x
- 48.1 debug dot1x detail
- 48.2 debug dot1x error
- 48.3 debug dot1x fsm
- 48.4 debug dot1x packet
- 48.5 dot1x accept-mac
- 48.6 dot1x eapor enable
- 48.7 dot1x enable
- 48.8 dot1x guest-vlan
- 48.9 dot1x macfilter enable
- 48.10 dot1x max-req
- 48.11 dot1x user free-resource
- 48.12 dot1x max-user macbased
- 48.13 dot1x max-user userbased
- 48.14 dot1x port-control
- 48.15 dot1x port-method
- 48.16 dot1x privateclient enable
- 48.17 dot1x privateclient protect enable
- 48.18 dot1x re-authenticate
- 48.19 dot1x re-authentication
- 48.20 dot1x timeout quiet-period
- 48.21 dot1x timeout re-authperiod
- 48.22 dot1x timeout tx-period
- 48.23 dot1x unicast enable
- 48.24 show dot1x
- 48.25 user-control limit ipv4
- 48.26 user-control limit ipv6
- Chapter 49 Commands for the Number Limitation Function of MAC and IP in Port, VLAN
- 49.1 debug ip arp count
- 49.2 debug ipv6 nd count
- 49.3 debug switchport arp count
- 49.4 debug switchport mac count
- 49.5 debug switchport nd count
- 49.6 debug vlan mac count
- 49.7 ip arp dynamic maximum
- 49.8 ipv6 nd dynamic maximum
- 49.9 mac-address query timeout
- 49.10 show arp-dynamic count
- 49.11 show mac-address dynamic count
- 49.12 show nd-dynamic count
- 49.13 switchport arp dynamic maximum
- 49.14 switchport mac-address dynamic maximum
- 49.15 switchport mac-address violation
- 49.16 switchport nd dynamic maximum
- 49.17 vlan mac-address dynamic maximum
- Chapter 50 Commands for AM Configuration
- Chapter 51 Commands for TACACS+
- Chapter 52 Commands for RADIUS
- 52.1 aaa enable
- 52.2 aaa-accounting enable
- 52.3 aaa-accounting update
- 52.4 debug aaa packet
- 52.5 debug aaa detail attribute
- 52.6 debug aaa detail connection
- 52.7 debug aaa detail event
- 52.8 debug aaa error
- 52.9 radius nas-ipv4
- 52.10 radius nas-ipv6
- 52.11 radius-server accounting host
- 52.12 radius-server authentication host
- 52.13 radius-server dead-time
- 52.14 radius-server key
- 52.15 radius-server retransmit
- 52.16 radius-server timeout
- 52.17 radius-server accounting-interim-update timeout
- 52.18 show aaa authenticated-user
- 52.19 show aaa authenticating-user
- 52.20 show aaa config
- 52.21 show radius authenticated-user count
- 52.22 show radius authenticating-user count
- 52.23 show radius count
- Chapter 53 Commands for SSL Configuration
- Chapter 54 Commands for IPv6 Security RA
- Chapter 55 Commands for VLAN-ACL
- Chapter 56 Commands for MAB
- 56.1 authentication mab
- 56.2 clear mac-authentication-bypass binding
- 56.3 debug mac-authentication-bypass
- 56.4 mac-authentication-bypass binding-limit
- 56.5 mac-authentication-bypass enable
- 56.6 mac-authentication-bypass guest-vlan
- 56.7 mac-authentication-bypass spoofing-garp-check
- 56.8 mac-authentication-bypass timeout linkup-period
- 56.9 mac-authentication-bypass timeout offline-detect
- 56.10 mac-authentication-bypass timeout quiet-period
- 56.11 mac-authentication-bypass timeout reauth-period
- 56.12 mac-authentication-bypass timeout stale-period
- 56.13 mac-authentication-bypass username-format
- 56.14 show mac-authentication-bypass
- Chapter 57 Commands for PPPoE Intermediate Agent
- 57.1 debug pppoe intermediate agent packet {receive | send} interface ethernet
- 57.2 pppoe intermediate-agent
- 57.3 pppoe intermediate-agent (Port)
- 57.4 pppoe intermediate-agent access-node-id
- 57.5 pppoe intermediate-agent circuit-id
- 57.6 pppoe intermediate-agent identifier-string option delimiter
- 57.7 pppoe intermediate-agent remote-id
- 57.8 pppoe intermediate-agent trust
- 57.9 pppoe intermediate-agent vendor-tag strip
- 57.10 show pppoe intermediate-agent access-node-id
- 57.11 show pppoe intermediate-agent identifier-string option delimiter
- 57.12 show pppoe intermediate-agent info
- 57.1 debug pppoe intermediate agent packet {receive | send} interface ethernet
- Chapter 58 Commands for SAVI
- 58.1 Commands for SAVI
- 58.1.1 ipv6 cps prefix
- 58.1.2 ipv6 cps prefix check enable
- 58.1.3 ipv6 dhcp snooping trust
- 58.1.4 ipv6 nd snooping trust
- 58.1.5 savi check binding
- 58.1.6 savi enable
- 58.1.7 savi ipv6 binding num
- 58.1.8 savi ipv6 check source binding
- 58.1.9 savi ipv6 check source ip-address mac-address
- 58.1.10 savi ipv6 {dhcp-only | slaac-only | dhcp-slaac} enable
- 58.1.11 savi ipv6 mac-binding-limit
- 58.1.12 savi max-dad-dalay
- 58.1.13 savi max-dad-prepare-delay
- 58.1.14 savi max-slaac-life
- 58.1.15 savi timeout bind-protect
- 58.2 Commands for Monitor and Debug
- 58.1 Commands for SAVI
- Chapter 59 Commands for Web Portal Configuration
- 59.1 clear webportal binding
- 59.2 debug webportal binding
- 59.3 debug webportal error
- 59.4 debug webportal event
- 59.5 debug webportal packet
- 59.6 ip dhcp snooping binding webportal
- 59.7 show webportal
- 59.8 show webportal binding
- 59.9 webportal binding-limit
- 59.10 webportal enable
- 59.11 webportal enable (Port)
- 59.12 webportal nas-ip
- 59.13 webportal redirect
- Chapter 60 Commands for VRRP
- Chapter 61 Commands for IPv6 VRRPv3 Configuration
- Chapter 62 Commands for MRPP
- Chapter 63 Commands for ULPP
- 63.1 clear ulpp flush counter interface
- 63.2 control vlan
- 63.3 debug ulpp error
- 63.4 debug ulpp event
- 63.5 debug ulpp flush content interface
- 63.6 debug ulpp flush {send | receive} interface
- 63.7 description
- 63.8 flush disable arp
- 63.9 flush disable mac
- 63.10 flush enable arp
- 63.11 flush enable mac
- 63.12 preemption delay
- 63.13 preemption mode
- 63.14 protect vlan-reference-instance
- 63.15 show ulpp flush counter interface
- 63.16 show ulpp flush-receive-port
- 63.17 show ulpp group
- 63.18 ulpp control vlan
- 63.19 ulpp flush disable arp
- 63.20 ulpp flush disable mac
- 63.21 ulpp flush enable arp
- 63.22 ulpp flush enable mac
- 63.23 ulpp group
- 63.24 ulpp group master
- 63.25 ulpp group slave
- Chapter 64 Commands for ULSM
- Chapter 65 Commands for Mirroring Configuration
- Chapter 66 Commands for RSPAN Configuration
- Chapter 67 Commands for sFlow
- Chapter 68 Commands for SNTP
- Chapter 69 Commands for NTP
- 69.1 clock timezone
- 69.2 debug ntp adjust
- 69.3 debug ntp authentication
- 69.4 debug ntp events
- 69.5 debug ntp packet
- 69.6 debug ntp sync
- 69.7 ntp access-group
- 69.8 ntp authenticate
- 69.9 ntp authentication-key
- 69.10 ntp broadcast client
- 69.11 ntp broadcast server count
- 69.12 ntp disable
- 69.13 ntp enable
- 69.14 ntp ipv6 multicast client
- 69.15 ntp multicast client
- 69.16 ntp server
- 69.17 ntp trusted-key
- 69.18 show ntp status
- 69.19 show ntp session
- Chapter 70 Commands for DNSv4/v6
- 70.1 clear dynamic-host
- 70.2 debug dns
- 70.3 dns-server
- 70.4 dns lookup
- 70.5 show dns name-server
- 70.6 show dns domain-list
- 70.7 show dns hosts
- 70.8 show dns config
- 70.9 show dns client
- 70.10 ip domain-lookup
- 70.11 ip domain-list
- 70.12 ip dns server
- 70.13 ip dns server queue maximum
- 70.14 ip dns server queue timeout
- Chapter 71 Commands for Summer Time
- Chapter 72 Commands for Show
- 72.1 clear history all-users
- 72.2 clear logging
- 72.3 history all-users max-length
- 72.4 logging
- 72.5 logging executed-commands
- 72.6 logging loghost sequence-number
- 72.7 ping
- 72.8 ping6
- 72.9 show debugging
- 72.10 show flash
- 72.11 show history
- 72.12 show history all-users
- 72.13 show logging buffered
- 72.14 show logging executed-commands state
- 72.15 show logging source
- 72.16 show memory
- 72.17 show running-config
- 72.18 show startup-config
- 72.19 show switchport interface
- 72.20 show tcp
- 72.21 show tcp ipv6
- 72.22 show telnet login
- 72.23 show temperature
- 72.24 show tech-support
- 72.25 show udp
- 72.26 show udp ipv6
- 72.27 show version
- 72.28 traceroute
- 72.29 traceroute6
- Chapter 73 Commands for Reload Switch after Specified Time
- Chapter 74 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
- Chapter 75 Commands for Basic VSF Configuration
- Chapter 76 Commands for Configuration and Debugging of VSF Conflict Detection
- Chapter 77 Commands for VSF Debugging
- 77.1 show running-config
- 77.2 show vsf
- 77.3 show vsf topology
- 77.4 show vsf-config
- 77.5 show mad config
- 77.6 show vsf cpu-database all-member brief-information
- 77.7 show vsf cpu-database member basic-information
- 77.8 show vsf cpu-database member running-information
- 77.9 show vsf cpu-database member port-information
- 77.10 show vsf cpu-database member port-link-information
- 77.11 show slot
- 77.12 debug vsf packet detail
- 77.13 debug vsf packet
- 77.14 debug vsf event
- 77.15 debug vsf error
- Chapter 78 Commands for PoE
44-41
(*,G) Entries: 1
(S,G) Entries: 0
(S,G,rpt) Entries: 0
(*, 239.192.1.10)
RP: 10.1.6.1
RPF nbr: 10.1.4.10
RPF idx: Vlan1
Upstream State: JOINED
Local ..l.............................
Joined ................................
Asserted ................................
Outgoing ..o.............................
Displayed Information
Explanations
Entries
The counts of each item
RP
Share tree’s RP address
RPF nbr
RP direction or upneighbor of source direction.
RPF idx
RPF nbr interface
Upstream State Upstream State, there are two state of Joined(join
the tree, expect to receive data from upstream)
and Not Joined(quit the tree, not expect to receive
data from upstream), and more options such as
RPT Not Joined, Pruned, Not Pruned are available
for（S,G,rpt.）
Local
Local join interface, this interface receive
IGMPJoin
Joined
PIM join interface, this interface receive J/P
messages
Asserted Asserted state
Outgoing Final outgoing of multicast data, in this example,
the index of the outgoing interface is 2. Command
“show ip pim interface” can query interface
information.
44.3.36 show ip pim neighbor