User's Manual
Table Of Contents
- Chapter 1 Commands for Basic Switch Configuration
- 1.1 Commands for Basic Configuration
- 1.1.1 Authentication line login
- 1.1.2 banner
- 1.1.3 boot img
- 1.1.4 boot startup-config
- 1.1.5 clock set
- 1.1.6 config
- 1.1.7 debug ssh-server
- 1.1.8 disable
- 1.1.9 enable
- 1.1.10 enable password
- 1.1.11 end
- 1.1.12 exec-timeout
- 1.1.13 exit
- 1.1.14 help
- 1.1.15 hostname
- 1.1.16 ip host
- 1.1.17 ipv6 host
- 1.1.18 ip http server
- 1.1.19 language
- 1.1.20 login
- 1.1.21 password
- 1.1.22 reload
- 1.1.23 service password-encryption
- 1.1.24 service terminal-length
- 1.1.25 sysContact
- 1.1.26 sysLocation
- 1.1.27 set default
- 1.1.28 setup
- 1.1.29 show clock
- 1.1.30 show cpu usage
- 1.1.31 show memory usage
- 1.1.32 show privilege
- 1.1.33 show temperature
- 1.1.34 show tech-support
- 1.1.35 show version
- 1.1.36 username
- 1.1.37 web language
- 1.1.38 write
- 1.2 Commands for Telnet
- 1.2.1 authentication ip access-class
- 1.2.2 authentication ipv6 access-class
- 1.2.3 authentication line login
- 1.2.4 authentication securityip
- 1.2.5 authentication securityipv6
- 1.2.6 authorization
- 1.2.7 terminal length
- 1.2.8 terminal monitor
- 1.2.9 telnet
- 1.2.10 telnet server enable
- 1.2.11 telnet-server max-connection
- 1.2.12 ssh-server authentication-retries
- 1.2.13 ssh-server enable
- 1.2.14 ssh-server host-key create rsa
- 1.2.15 ssh-server max-connection
- 1.2.16 ssh-server timeout
- 1.2.17 show ssh-server
- 1.2.18 show telnet login
- 1.2.19 who
- 1.3 Commands for Configuring Switch IP
- 1.4 Commands for SNMP
- 1.4.1 debug snmp mib
- 1.4.2 debug snmp kernel
- 1.4.3 rmon enable
- 1.4.4 show private-mib oid
- 1.4.5 show snmp
- 1.4.6 show snmp engineid
- 1.4.7 show snmp group
- 1.4.8 show snmp mib
- 1.4.9 show snmp status
- 1.4.10 show snmp user
- 1.4.11 show snmp view
- 1.4.12 snmp-server community
- 1.4.13 snmp-server enable
- 1.4.14 snmp-server enable traps
- 1.4.15 snmp-server engineid
- 1.4.16 snmp-server group
- 1.4.17 snmp-server host
- 1.4.18 snmp-server securityip
- 1.4.19 snmp-server securityip
- 1.4.20 snmp-server trap-source
- 1.4.21 snmp-server user
- 1.4.22 snmp-server view
- 1.5 Commands for Switch Upgrade
- 1.1 Commands for Basic Configuration
- Chapter 2 File System Commands
- Chapter 3 Commands for Cluster
- 3.1 clear cluster nodes
- 3.2 cluster auto-add
- 3.3 cluster commander
- 3.4 cluster ip-pool
- 3.5 cluster keepalive interval
- 3.6 cluster keepalive loss-count
- 3.7 cluster member
- 3.8 cluster member auto-to-user
- 3.9 cluster reset member
- 3.10 cluster run
- 3.11 cluster update member
- 3.12 debug cluster
- 3.13 debug cluster packets
- 3.14 show cluster
- 3.15 show cluster members
- 3.16 show cluster candidates
- 3.17 show cluster topology
- 3.18 rcommand commander
- 3.19 rcommand member
- Chapter 4 Commands for Network Port Configuration
- 4.1 Commands for Ethernet Port Configuration
- 4.1.1 bandwidth
- 4.1.2 combo-forced-mode
- 4.1.3 clear counters interface
- 4.1.4 flow control
- 4.1.5 interface ethernet
- 4.1.6 loopback
- 4.1.7 mdi
- 4.1.8 name
- 4.1.9 negotiation
- 4.1.10 port-rate-statistics interval
- 4.1.11 port-scan-mode
- 4.1.12 rate-suppression
- 4.1.13 rate-violation
- 4.1.14 show interface
- 4.1.15 shutdown
- 4.1.16 speed-duplex
- 4.1.17 virtual-cable-test
- 4.1 Commands for Ethernet Port Configuration
- Chapter 5 Commands for Port Isolation Function
- Chapter 6 Commands for Port Loopback Detection Function
- Chapter 7 Commands for ULDP
- Chapter 8 Commands for LLDP Function
- 8.1 clear lldp remote-table
- 8.2 debug lldp
- 8.3 debug lldp packets
- 8.4 lldp enable
- 8.5 lldp enable (Port)
- 8.6 lldp mode
- 8.7 lldp msgTxHold
- 8.8 lldp neighbors max-num
- 8.9 lldp notification interval
- 8.10 lldp tooManyNeighbors
- 8.11 lldp transmit delay
- 8.12 lldp transmit optional tlv
- 8.13 lldp trap
- 8.14 lldp tx-interval
- 8.15 show debugging lldp
- 8.16 show lldp
- 8.17 show lldp interface ethernet
- 8.18 show lldp neighbors interface ethernet
- 8.19 show lldp traffic
- Chapter 9 Commands for Port Channel
- Chapter 10 Commands for Jumbo
- Chapter 11 Commands for EFM OAM
- 11.1 clear ethernet-oam
- 11.2 debug ethernet-oam error
- 11.3 debug ethernet-oam fsm
- 11.4 debug ethernet-oam packet
- 11.5 debug ethernet-oam timer
- 11.6 ethernet-oam
- 11.7 ethernet-oam errored-frame threshold high
- 11.8 ethernet-oam errored-frame threshold low
- 11.9 ethernet-oam errored-frame window
- 11.10 ethernet-oam errored-frame-period threshold high
- 11.11 ethernet-oam errored-frame-period threshold low
- 11.12 ethernet-oam errored-frame-period window
- 11.13 ethernet-oam errored-frame-seconds threshold high
- 11.14 ethernet-oam errored-frame-seconds threshold low
- 11.15 ethernet-oam errored-frame-seconds window
- 11.16 ethernet-oam errored-symbol-period threshold high
- 11.17 ethernet-oam errored-symbol-period threshold low
- 11.18 ethernet-oam errored-symbol-period window
- 11.19 ethernet-oam link-monitor
- 11.20 ethernet-oam mode
- 11.21 ethernet-oam period
- 11.22 ethernet-oam remote-failure
- 11.23 ethernet-oam remote-loopback
- 11.24 ethernet-oam remote-loopback supported
- 11.25 ethernet-oam timeout
- 11.26 show ethernet-oam
- 11.27 show ethernet-oam events
- 11.28 show ethernet-oam link-events configuration
- 11.29 show ethernet-oam loopback status
- Chapter 12 VLAN Configuration
- 12.1 Commands for VLAN Configuration
- 12.1.1 debug gvrp event
- 12.1.2 debug gvrp packet
- 12.1.3 dot1q-tunnel enable
- 12.1.4 dot1q-tunnel tpid
- 12.1.5 garp timer join
- 12.1.6 garp timer leave
- 12.1.7 garp timer leaveall
- 12.1.8 gvrp (Global)
- 12.1.9 gvrp (Port)
- 12.1.10 no garp timer
- 12.1.11 name
- 12.1.12 private-vlan
- 12.1.13 private-vlan association
- 12.1.14 show dot1q-tunnel
- 12.1.15 show garp timer
- 12.1.16 show gvrp fsm information
- 12.1.17 show gvrp leaveAll fsm information
- 12.1.18 show gvrp leavetimer running
- 12.1.19 show gvrp port-member
- 12.1.20 show gvrp port registerd vlan
- 12.1.21 show gvrp timer running information
- 12.1.22 show gvrp vlan registerd port
- 12.1.23 show vlan
- 12.1.24 show vlan-translation
- 12.1.25 switchport access vlan
- 12.1.26 switchport forbidden vlan
- 12.1.27 switchport hybrid allowed vlan
- 12.1.28 switchport hybrid native vlan
- 12.1.29 switchport interface
- 12.1.30 switchport mode
- 12.1.31 switchport mode trunk allow-null
- 12.1.32 switchport trunk allowed vlan
- 12.1.33 switchport trunk native vlan
- 12.1.34 vlan
- 12.1.35 vlan internal
- 12.1.36 vlan ingress enable
- 12.1.37 vlan-translation
- 12.1.38 vlan-translation enable
- 12.1.39 vlan-translation miss drop
- 12.2 Commands for Dynamic VLAN Configuration
- 12.2.1 dynamic-vlan mac-vlan prefer
- 12.2.2 dynamic-vlan subnet-vlan prefer
- 12.2.3 mac-vlan
- 12.2.4 mac-vlan vlan
- 12.2.5 protocol-vlan
- 12.2.6 show dynamic-vlan prefer
- 12.2.7 show mac-vlan
- 12.2.8 show mac-vlan interface
- 12.2.9 show protocol-vlan
- 12.2.10 show subnet-vlan
- 12.2.11 show subnet-vlan interface
- 12.2.12 subnet-vlan
- 12.2.13 switchport mac-vlan enable
- 12.2.14 switchport subnet-vlan enable
- 12.3 Commands for Voice VLAN Configuration
- 12.1 Commands for VLAN Configuration
- Chapter 13 Commands for MAC Address Table Configuration
- 13.1 Commands for MAC Address Table Configuration
- 13.2 Commands for Mac Address Binding configuration
- 13.2.1 clear port-security dynamic
- 13.2.2 mac-address-table periodic-monitor-time
- 13.2.3 show port-security
- 13.2.4 show port-security address
- 13.2.5 show port-security interface
- 13.2.6 switchport port-security
- 13.2.7 switchport port-security convert
- 13.2.8 switchport port-security lock
- 13.2.9 switchport port-security mac-address
- 13.2.10 switchport port-security maximum
- 13.2.11 switchport port-security timeout
- 13.2.12 switchport port-security violation
- Chapter 14 ommands for MSTP
- 14.1 Commands for MSTP
- 14.1.1 abort
- 14.1.2 exit
- 14.1.3 instance vlan
- 14.1.4 name
- 14.1.5 no
- 14.1.6 revision-level
- 14.1.7 show
- 14.1.8 spanning-tree
- 14.1.9 spanning-tree cost
- 14.1.10 spanning-tree digest-snooping
- 14.1.11 spanning-tree format
- 14.1.12 spanning-tree forward-time
- 14.1.13 spanning-tree hello-time
- 14.1.14 spanning-tree link-type p2p
- 14.1.15 spanning-tree maxage
- 14.1.16 spanning-tree max-hop
- 14.1.17 spanning-tree mcheck
- 14.1.18 spanning-tree mode
- 14.1.19 spanning-tree mst configuration
- 14.1.20 spanning-tree mst cost
- 14.1.21 spanning-tree mst loopguard
- 14.1.22 spanning-tree mst port-priority
- 14.1.23 spanning-tree mst priority
- 14.1.24 spanning-tree mst rootguard
- 14.1.25 spanning-tree portfast
- 14.1.26 spanning-tree port-priority
- 14.1.27 spanning-tree priority
- 14.1.28 spanning-tree rootguard
- 14.1.29 spanning-tree tcflush (Global mode)
- 14.1.30 spanning-tree tcflush (Port mode)
- 14.1.31 spanning-tree transmit-hold-count
- 14.2 Commands for Monitor and Debug
- 14.1 Commands for MSTP
- Chapter 15 Commands for QoS and PBR
- 15.1 accounting
- 15.2 class
- 15.3 class-map
- 15.4 clear mls qos statistics
- 15.5 drop
- 15.6 match
- 15.7 mls qos aggregate-policy
- 15.8 mls qos cos
- 15.9 mls qos internal-priority
- 15.10 mls qos map
- 15.11 mls qos internal-priority
- 15.12 mls qos queue weight
- 15.13 mls qos trust
- 15.14 pass-through-cos
- 15.15 pass-through-dscp
- 15.16 policy
- 15.17 policy aggregate
- 15.18 policy-map
- 15.19 service-policy input
- 15.20 service-policy input vlan
- 15.21 set internal priority
- 15.22 show class-map
- 15.23 show policy-map
- 15.24 show mls qos interface
- 15.25 show mls qos maps
- 15.26 show mls qos vlan
- 15.27 show mls qos aggregate-policy
- 15.28 transmit
- Chapter 16 Commands for for Flow-based Redirection
- Chapter 17 Commands for Egress QoS
- Chapter 18 Commands for Flexible QinQ
- Chapter 19 Commands for Layer 3 Forwarding
- 19.1 Commands for Layer 3 Interface
- 19.2 Commands for IPv4/v6 configuration
- 19.2.1 clear ip traffic
- 19.2.2 clear ipv6 neighbor
- 19.2.3 debug ip icmp
- 19.2.4 debug ip packet
- 19.2.5 debug ipv6 packet
- 19.2.6 debug ipv6 icmp
- 19.2.7 debug ipv6 nd
- 19.2.8 debug ipv6 tunnel packet
- 19.2.9 description
- 19.2.10 ipv6 proxy enable
- 19.2.11 ip address
- 19.2.12 ipv6 address
- 19.2.13 ipv6 route
- 19.2.14 ipv6 redirect
- 19.2.15 ipv6 nd dad attempts
- 19.2.16 ipv6 nd ns-interval
- 19.2.17 ipv6 nd suppress-ra
- 19.2.18 ipv6 nd ra-lifetime
- 19.2.19 ipv6 nd min-ra-interval
- 19.2.20 ipv6 nd max-ra-interval
- 19.2.21 ipv6 nd prefix
- 19.2.22 ipv6 nd ra-hoplimit
- 19.2.23 ipv6 nd ra-mtu
- 19.2.24 ipv6 nd reachable-time
- 19.2.25 ipv6 nd retrans-timer
- 19.2.26 ipv6 nd other-config-flag
- 19.2.27 ipv6 nd managed-config-flag
- 19.2.28 ipv6 neighbor
- 19.2.29 interface tunnel
- 19.2.30 show ip interface
- 19.2.31 show ip traffic
- 19.2.32 show ipv6 interface
- 19.2.33 show ipv6 route
- 19.2.34 show ipv6 neighbors
- 19.2.35 show ipv6 traffic
- 19.2.36 show ipv6 redirect
- 19.2.37 show ipv6 tunnel
- 19.2.38 tunnel source
- 19.2.39 tunnel destination
- 19.2.40 tunnel nexthop
- 19.2.41 tunnel mode
- 19.3 Commands for IP Route Aggregation
- 19.4 Commands for URPF
- 19.5 Commands for ARP Configuration
- 19.6 Commands for Hardware Tunnel Capacity
- Chapter 20 Commands for ARP Scanning Prevention
- 20.1 anti-arpscan enable
- 20.2 anti-arpscan port-based threshold
- 20.3 anti-arpscan ip-based threshold
- 20.4 anti-arpscan trust
- 20.5 anti-arpscan trust ip
- 20.6 anti-arpscan recovery enable
- 20.7 anti-arpscan recovery time
- 20.8 anti-arpscan log enable
- 20.9 anti-arpscan trap enable
- 20.10 show anti-arpscan
- 20.11 debug anti-arpscan
- Chapter 21 Commands for Preventing ARP, ND Spoofing
- Chapter 22 Command for ARP GUARD
- Chapter 23 Command for ARP Local Proxy
- Chapter 24 Commands for Gratuitous ARP Configuration
- Chapter 25 Commands for Keepalive Gateway
- Chapter 26 Commands for DHCP
- 26.1 Commands for DHCP Server Configuration
- 26.1.1 bootfile
- 26.1.2 clear ip dhcp binding
- 26.1.3 clear ip dhcp conflict
- 26.1.4 clear ip dhcp server statistics
- 26.1.5 client-identifier
- 26.1.6 debug ip dhcp client
- 26.1.7 debug ip dhcp relay
- 26.1.8 debug ip dhcp server
- 26.1.9 default-router
- 26.1.10 dns-server
- 26.1.11 domain-name
- 26.1.12 hardware-address
- 26.1.13 host
- 26.1.14 ip dhcp conflict logging
- 26.1.15 ip dhcp excluded-address
- 26.1.16 ip dhcp pool
- 26.1.17 ip dhcp conflict ping-detection enable
- 26.1.18 ip dhcp ping packets
- 26.1.19 ip dhcp ping timeout
- 26.1.20 lease
- 26.1.21 netbios-name-server
- 26.1.22 netbios-node-type
- 26.1.23 network-address
- 26.1.24 next-server
- 26.1.25 option
- 26.1.26 service dhcp
- 26.1.27 show ip dhcp binding
- 26.1.28 show ip dhcp conflict
- 26.1.29 show ip dhcp relay information option
- 26.1.30 show ip dhcp server statistics
- 26.2 Commands for DHCP Relay Configuration
- 26.1 Commands for DHCP Server Configuration
- Chapter 27 Commands for DHCPv6
- 27.1 clear ipv6 dhcp binding
- 27.2 clear ipv6 dhcp conflict
- 27.3 clear ipv6 dhcp statistics
- 27.4 debug ipv6 dhcp client packet
- 27.5 debug ipv6 dhcp detail
- 27.6 debug ipv6 dhcp relay packet
- 27.7 debug ipv6 dhcp server
- 27.8 dns-server
- 27.9 domain-name
- 27.10 excluded-address
- 27.11 ipv6 address
- 27.12 ipv6 dhcp client pd
- 27.13 ipv6 dhcp client pd hint
- 27.14 ipv6 dhcp pool
- 27.15 ipv6 dhcp relay destination
- 27.16 ipv6 dhcp server
- 27.17 ipv6 general-prefix
- 27.18 ipv6 local pool
- 27.19 lifetime
- 27.20 network-address
- 27.21 prefix-delegation
- 27.22 prefix-delegation pool
- 27.23 service dhcpv6
- 27.24 show ipv6 dhcp
- 27.25 show ipv6 dhcp binding
- 27.26 show ipv6 dhcp conflict
- 27.27 show ipv6 dhcp interface
- 27.28 show ipv6 dhcp pool
- 27.29 show ipv6 dhcp statistics
- 27.30 show ipv6 general-prefix
- 27.31 show ipv6 local pool
- Chapter 28 Commands for DHCP Option 82
- 28.1 debug ip dhcp relay packet
- 28.2 ip dhcp relay information option
- 28.3 ip dhcp relay information option delimiter
- 28.4 ip dhcp relay information option remote-id
- 28.5 ip dhcp relay information option remote-id format
- 28.6 ip dhcp relay information option self-defined remote-id
- 28.7 ip dhcp relay information option self-defined remote-id format
- 28.8 ip dhcp relay information option self-defined subscriber-id
- 28.9 ip dhcp relay information option self-defined subscriber-id format
- 28.10 ip dhcp relay information option subscriber-id
- 28.11 ip dhcp relay information option subscriber-id format
- 28.12 ip dhcp relay information policy
- 28.13 ip dhcp server relay information enable
- 28.14 show ip dhcp relay information option
- Chapter 29 Commands for DHCPv6 option37, 38
- 29.1 Commands for DHCPv6 option37, 38
- 29.1.1 address range
- 29.1.2 class
- 29.1.3 ipv6 dhcp class
- 29.1.4 ipv6 dhcp relay remote-id
- 29.1.5 ipv6 dhcp relay remote-id option
- 29.1.6 ipv6 dhcp relay subscriber-id
- 29.1.7 ipv6 dhcp relay subscriber-id option
- 29.1.8 ipv6 dhcp relay subscriber-id select delimiter
- 29.1.9 ipv6 dhcp server remote-id option
- 29.1.10 ipv6 dhcp server select relay-forw
- 29.1.11 ipv6 dhcp server subscriber-id option
- 29.1.12 ipv6 dhcp snooping remote-id
- 29.1.13 ipv6 dhcp snooping remote-id option
- 29.1.14 ipv6 dhcp snooping remote-id policy
- 29.1.15 ipv6 dhcp snooping subscriber-id
- 29.1.16 ipv6 dhcp snooping subscriber-id option
- 29.1.17 ipv6 dhcp snooping subscriber-id policy
- 29.1.18 ipv6 dhcp snooping subscriber-id select delimiter
- 29.1.19 ipv6 dhcp use class
- 29.1.20 remote-id subscriber-id
- 29.2 Commands for Monitoring and Debugging
- 29.1 Commands for DHCPv6 option37, 38
- Chapter 30 Commands for DHCP Snooping
- 30.1 debug ip dhcp snooping binding
- 30.2 debug ip dhcp snooping event
- 30.3 debug ip dhcp snooping packet
- 30.4 debug ip dhcp snooping packet interface
- 30.5 debug ip dhcp snooping update
- 30.6 enable trustview key
- 30.7 ip dhcp snooping
- 30.8 ip dhcp snooping action
- 30.9 ip dhcp snooping action MaxNum
- 30.10 ip dhcp snooping binding
- 30.11 ip dhcp snooping binding arp
- 30.12 ip dhcp snooping binding dot1x
- 30.13 ip dhcp snooping binding user
- 30.14 ip dhcp snooping binding user-control
- 30.15 ip dhcp snooping binding user-control max-user
- 30.16 ip dhcp snooping information enable
- 30.17 ip dhcp snooping information option allow-untrusted
- 30.18 ip dhcp snooping information option delimiter
- 30.19 ip dhcp snooping information option remote-id
- 30.20 ip dhcp snooping information option self-defined remote-id
- 30.21 ip dhcp snooping information option self-defined remote-id format
- 30.22 ip dhcp snooping information option self-defined subscriber-id
- 30.23 ip dhcp snooping information option self-defined subscriber-id format
- 30.24 ip dhcp snooping information option subscriber-id
- 30.25 ip dhcp snooping information option subscriber-id format
- 30.26 ip dhcp snooping limit-rate
- 30.27 ip dhcp snooping trust
- 30.28 ip user helper-address
- 30.29 ip user private packet version two
- 30.30 show ip dhcp snooping
- 30.31 show ip dhcp snooping binding all
- 30.32 show trustview status
- Chapter 31 Commands for Routing Policy
- 31.1 ip prefix-list description
- 31.2 ip prefix-list seq
- 31.3 ip prefix-list sequence-number
- 31.4 match as-path
- 31.5 match community
- 31.6 match interface
- 31.7 match ip
- 31.8 match ipv6 address
- 31.9 match ipv6 next-hop
- 31.10 match metric
- 31.11 match origin
- 31.12 match route-type
- 31.13 match tag
- 31.14 route-map
- 31.15 set aggregator
- 31.16 set as-path
- 31.17 set atomic-aggregate
- 31.18 set comm-list
- 31.19 set community
- 31.20 set extcommunity
- 31.21 set ip next-hop
- 31.22 set local-preference
- 31.23 set metric
- 31.24 set metric-type
- 31.25 set origin
- 31.26 set originator-id
- 31.27 set tag
- 31.28 set vpnv4 next-hop
- 31.29 set weight
- 31.30 show ip prefix-list
- 31.31 show ip prefix-list
- 31.32 show route-map
- 31.33 show router-id
- Chapter 32 Commands for Static Route
- Chapter 33 Commands for RIP
- 33.1 accept-lifetime
- 33.2 address-family ipv4
- 33.3 clear ip rip route
- 33.4 debug rip
- 33.5 debug rip redistribute message send
- 33.6 debug rip redistribute route receive
- 33.7 default-information originate
- 33.8 default-metric
- 33.9 distance
- 33.10 distribute-list
- 33.11 exit-address-family
- 33.12 ip rip aggregate-address
- 33.13 ip rip authentication key-chain
- 33.14 ip rip authentication mode
- 33.15 ip rip authentication string
- 33.16 ip rip authentication cisco-compatible
- 33.17 ip rip receive-packet
- 33.18 ip rip receive version
- 33.19 ip rip send-packet
- 33.20 ip rip send version
- 33.21 ip rip split-horizon
- 33.22 key
- 33.23 key chain
- 33.24 key-string
- 33.25 maximum-prefix
- 33.26 neighbor
- 33.27 network
- 33.28 offset-list
- 33.29 passive-interface
- 33.30 recv-buffer-size
- 33.31 redistribute
- 33.32 route
- 33.33 router rip
- 33.34 send-lifetime
- 33.35 show debugging rip
- 33.36 show ip protocols rip
- 33.37 show ip rip
- 33.38 show ip rip database
- 33.39 show ip rip interface
- 33.40 show ip rip aggregate
- 33.41 timers basic
- 33.42 version
- Chapter 34 Commands for RIPng
- 34.1 clear ipv6 route
- 34.2 default-information originate
- 34.3 default-metric
- 34.4 distance
- 34.5 distribute-list
- 34.6 debug ipv6 rip
- 34.7 debug ipv6 rip redistribute message send
- 34.8 debug ipv6 rip redistribute route receive
- 34.9 ipv6 rip aggregate-address
- 34.10 ipv6 rip split-horizon
- 34.11 ipv6 router rip
- 34.12 neighbor
- 34.13 offset-list
- 34.14 passive-interface
- 34.15 redistribute
- 34.16 redistribute ospf
- 34.17 route
- 34.18 router ipv6 rip
- 34.19 show debugging ipv6 rip
- 34.20 show ipv6 rip interface
- 34.21 show ipv6 rip redistribute
- 34.22 show ipv6 protocols rip
- 34.23 show ipv6 rip
- 34.24 show ipv6 rip database
- 34.25 show ipv6 rip aggregate
- 34.26 show ipv6 rip redistribute
- 34.27 timers basic
- Chapter 35 Commands for OSPF
- 35.1 area authentication
- 35.2 area default-cost
- 35.3 area filter-list
- 35.4 area nssa
- 35.5 area range
- 35.6 area stub
- 35.7 area virtual-link
- 35.8 auto-cost reference-bandwidth
- 35.9 compatible rfc1583
- 35.10 clear ip ospf process
- 35.11 debug ospf events
- 35.12 debug ospf ifsm
- 35.13 debug ospf lsa
- 35.14 debug ospf nfsm
- 35.15 debug ospf nsm
- 35.16 debug ospf packet
- 35.17 debug ospf route
- 35.18 debug ospf redistribute message send
- 35.19 debug ospf redistribute route receive
- 35.20 default-information originate
- 35.21 default-metric
- 35.22 distance
- 35.23 distribute-list
- 35.24 filter-policy
- 35.25 host area
- 35.26 ip ospf authentication
- 35.27 ip ospf authentication-key
- 35.28 ip ospf cost
- 35.29 ip ospf database-filter
- 35.30 ip ospf dead-interval
- 35.31 ip ospf disable all
- 35.32 ip ospf hello-interval
- 35.33 ip ospf message-digest-key
- 35.34 ip ospf mtu
- 35.35 ip ospf mtu-ignore
- 35.36 ip ospf network
- 35.37 ip ospf priority
- 35.38 ip ospf retransmit-interval
- 35.39 ip ospf transmit-delay
- 35.40 key
- 35.41 key chain
- 35.42 log-adjacency-changes detail
- 35.43 max-concurrent-dd
- 35.44 neighbor
- 35.45 network area
- 35.46 ospf abr-type
- 35.47 ospf router-id
- 35.48 overflow database
- 35.49 overflow database external
- 35.50 passive-interface
- 35.51 redistribute
- 35.52 redistribute ospf
- 35.53 router ospf
- 35.54 show ip ospf
- 35.55 show ip ospf border-routers
- 35.56 show ip ospf database
- 35.57 show ip ospf interface
- 35.58 show ip ospf neighbor
- 35.59 show ip ospf redistribute
- 35.60 show ip ospf route
- 35.61 show ip ospf virtual-links
- 35.62 show ip route process-detail
- 35.63 show ip protocols
- 35.64 summary-address
- 35.65 timers spf
- Chapter 36 Commands for OSPFv3
- 36.1 area default cost
- 36.2 area range
- 36.3 area stub
- 36.4 area virtual-link
- 36.5 abr-type
- 36.6 default-metric
- 36.7 debug ipv6 ospf events
- 36.8 debug ipv6 ospf ifsm
- 36.9 debug ipv6 ospf lsa
- 36.10 debug ipv6 ospf nfsm
- 36.11 debug ipv6 ospf nsm
- 36.12 debug ipv6 ospf packet
- 36.13 debug ipv6 ospf redistribute message send
- 36.14 debug ipv6 ospf redistribute route receive
- 36.15 debug ipv6 ospf route
- 36.16 ipv6 ospf cost
- 36.17 ipv6 ospf dead-interval
- 36.18 ipv6 ospf display route single-line
- 36.19 ipv6 ospf hello-interval
- 36.20 ipv6 ospf priority
- 36.21 ipv6 ospf retransmit-interval
- 36.22 ipv6 ospf transmit-delay
- 36.23 ipv6 router ospf
- 36.24 max-concurrent-dd
- 36.25 passive-interface
- 36.26 redistribute
- 36.27 redistribute ospf
- 36.28 router-id
- 36.29 router ipv6 ospf
- 36.30 show ipv6 ospf
- 36.31 show ipv6 ospf database
- 36.32 show ipv6 ospf interface
- 36.33 show ipv6 ospf neighbor
- 36.34 show ipv6 ospf route
- 36.35 show ipv6 ospf redistribute
- 36.36 show ipv6 ospf topology
- 36.37 show ipv6 ospf virtual-links
- 36.38 show ipv6 route process-detail
- 36.39 timers spf
- Chapter 37 Commands for BGP and MBGP4+
- 37.1 address-family
- 37.2 aggregate-address
- 37.3 bgp aggregate-nexthop-check
- 37.4 bgp always-compare-med
- 37.5 bgp asnotation asdot
- 37.6 bgp bestpath as-path ignore
- 37.7 bgp bestpath compare-confed-aspath
- 37.8 bgp bestpath compare-routerid
- 37.9 bgp bestpath med
- 37.10 bgp client-to-client reflection
- 37.11 bgp cluster-id
- 37.12 bgp confederation identifier
- 37.13 bgp confederation peers
- 37.14 bgp dampening
- 37.15 bgp default
- 37.16 bgp deterministic-med
- 37.17 bgp enforce-first-as
- 37.18 bgp fast-external-failover
- 37.19 bgp inbound-route-filter
- 37.20 bgp inbound-max-route-num
- 37.21 bgp log-neighbor-changes
- 37.22 bgp network import-check
- 37.23 bgp rfc1771-path-select
- 37.24 bgp rfc1771-strict
- 37.25 bgp router-id
- 37.26 bgp scan-time
- 37.27 clear ip bgp
- 37.28 clear ip bgp dampening
- 37.29 clear ip bgp flap-statistics
- 37.30 debug bgp
- 37.31 debug bgp redistribute message send
- 37.32 debug bgp redistribute route receive
- 37.33 debug ipv6 bgp redistribute message send
- 37.34 debug ipv6 bgp redistribute route receive
- 37.35 distance
- 37.36 distance bgp
- 37.37 exit-address-family
- 37.38 import map
- 37.39 ip as-path access-list
- 37.40 ip community-list
- 37.41 ip extcommunity-list
- 37.42 neighbor activate
- 37.43 neighbor advertisement-interval
- 37.44 neighbor allowas-in
- 37.45 neighbor as-override
- 37.46 neighbor attribute-unchanged
- 37.47 neighbor capability
- 37.48 neighbor capability orf prefix-list
- 37.49 neighbor collide-established
- 37.50 neighbor default-originate
- 37.51 neighbor description
- 37.52 neighbor distribute-list
- 37.53 neighbor dont-capability-negotiate
- 37.54 neighbor ebgp-multihop
- 37.55 neighbor enforce-multihop
- 37.56 neighbor filter-list
- 37.57 neighbor interface
- 37.58 neighbor maximum-prefix
- 37.59 neighbor next-hop-self
- 37.60 neighbor override-capability
- 37.61 neighbor passive
- 37.62 neighbor peer-group (Creating)
- 37.63 neighbor peer-group (Configuring group members)
- 37.64 neighbor port
- 37.65 neighbor prefix-list
- 37.66 neighbor remote-as
- 37.67 neighbor remove-private-AS
- 37.68 neighbor route-map
- 37.69 neighbor route-reflector-client
- 37.70 neighbor route-server-client
- 37.71 neighbor send-community
- 37.72 neighbor shutdown
- 37.73 neighbor soft-reconfiguration inbound
- 37.74 neighbor soo
- 37.75 neighbor strict-capability-match
- 37.76 neighbor timers
- 37.77 neighbor timers connect
- 37.78 neighbor unsuppress-map
- 37.79 neighbor update-source
- 37.80 neighbor version 4
- 37.81 neighbor weight
- 37.82 network (BGP)
- 37.83 redistribute (BGP)
- 37.84 redistribute ospf
- 37.85 redistribute ospf (MBGP4+)
- 37.86 router bgp
- 37.87 set vpnv4 next-hop
- 37.88 show ip bgp
- 37.89 show ip bgp attribute-info
- 37.90 show ip bgp community
- 37.91 show ip bgp community-info
- 37.92 show ip bgp community-list
- 37.93 show ip bgp dampening
- 37.94 show ip bgp filter-list
- 37.95 show ip bgp inconsistent-as
- 37.96 show ip bgp neighbors
- 37.97 show ip bgp paths
- 37.98 show ip bgp prefix-list
- 37.99 show ip bgp quote-regexp
- 37.100 show ip bgp regexp
- 37.101 show ip bgp route-map
- 37.102 show ip bgp scan
- 37.103 show ip bgp summary
- 37.104 show ip bgp view
- 37.105 show ip bgp view neighbors
- 37.106 show ip bgp vrf
- 37.107 show ip bgp vpnv4
- 37.108 show ipv6 bgp redistribute
- 37.109 timers bgp
- Chapter 38 Commands for Black Hole Routing
- Chapter 39 Commands for GRE Tunnel Configuration
- 39.1 debug gre
- 39.2 ip address
- 39.3 ip route
- 39.4 ipv6 address
- 39.5 ipv6 route
- 39.6 loopback-group (Global)
- 39.7 loopback-group (Port)
- 39.8 loopback-group (Tunnel Interface)
- 39.9 show gre tunnel
- 39.10 show interface tunnel
- 39.11 tunnel destination
- 39.12 tunnel mode gre ip
- 39.13 tunnel mode gre ipv6
- 39.14 tunnel source
- Chapter 40 Commands for ECMP
- Chapter 41 Commands for BFD
- 41.1 bfd authentication key
- 41.2 bfd authentication key md5
- 41.3 bfd authentication key text
- 41.4 bfd echo
- 41.5 bfd echo-source-ip
- 41.6 bfd echo-source-ipv6
- 41.7 bfd enable
- 41.8 bfd interval
- 41.9 bfd min-echo-recv-interval
- 41.10 bfd mode
- 41.11 debug bfd
- 41.12 ip ospf bfd enable
- 41.13 ip route bfd
- 41.14 ipv6 ospf bfd enable
- 41.15 ipv6 ospf bfd enable instance-id
- 41.16 ipv6 rip bfd enable
- 41.17 ipv6 route bfd
- 41.18 neighbor
- 41.19 rip bfd enable
- 41.20 show bfd neighbor
- Chapter 42 Commands for BGP GR
- Chapter 43 Commands for OSPF GR
- Chapter 44 IPv4 Multicast Protocol
- 44.1 Public Commands for Multicast
- 44.2 Commands for PIM-DM
- 44.2.1 debug pim timer sat
- 44.2.2 debug pim timer srt
- 44.2.3 ip mroute
- 44.2.4 ip pim bsr-border
- 44.2.5 ip pim dense-mode
- 44.2.6 ip pim dr-priority
- 44.2.7 ip pim exclude-genid
- 44.2.8 ip pim hello-holdtime
- 44.2.9 ip pim hello-interval
- 44.2.10 ip pim multicast-routing
- 44.2.11 ip pim neighbor-filter
- 44.2.12 ip pim scope-border
- 44.2.13 ip pim state-refresh origination-interval
- 44.2.14 show ip pim interface
- 44.2.15 show ip pim mroute dense-mode
- 44.2.16 show ip pim neighbor
- 44.2.17 show ip pim nexthop
- 44.3 Commands for PIM-SM
- 44.3.1 clear ip pim bsr rp-set
- 44.3.2 debug pim event
- 44.3.3 debug pim mfc
- 44.3.4 debug pim mib
- 44.3.5 debug pim nexthop
- 44.3.6 debug pim nsm
- 44.3.7 debug pim packet
- 44.3.8 debug pim state
- 44.3.9 debug pim timer
- 44.3.10 ip mroute
- 44.3.11 ip multicast unresolved-cache aging-time
- 44.3.12 ip pim accept-register
- 44.3.13 ip pim bsr-border
- 44.3.14 ip pim bsr-candidate
- 44.3.15 ip pim cisco-register-checksum
- 44.3.16 ip pim dr-priority
- 44.3.17 ip pim exclude-genid
- 44.3.18 ip pim hello-holdtime
- 44.3.19 ip pim hello-interval
- 44.3.20 ip pim ignore-rp-set-priority
- 44.3.21 ip pim jp-timer
- 44.3.22 ip pim multicast-routing
- 44.3.23 ip pim neighbor-filter
- 44.3.24 ip pim register-rate-limit
- 44.3.25 ip pim register-rp-reachability
- 44.3.26 ip pim register-source
- 44.3.27 ip pim register-suppression
- 44.3.28 ip pim rp-address
- 44.3.29 ip pim rp-candidate
- 44.3.30 ip pim rp-register-kat
- 44.3.31 ip pim scope-border
- 44.3.32 ip pim sparse-mode
- 44.3.33 show ip pim bsr-router
- 44.3.34 show ip pim interface
- 44.3.35 show ip pim mroute sparse-mode
- 44.3.36 show ip pim neighbor
- 44.3.37 show ip pim nexthop
- 44.3.38 show ip pim rp-hash
- 44.3.39 show ip pim rp mapping
- 44.4 Commands for MSDP Configuration
- 44.4.1 cache-sa-holdtime
- 44.4.2 cache-sa-maximum
- 44.4.3 cache-sa-state
- 44.4.4 clear msdp peer
- 44.4.5 clear msdp sa-cache
- 44.4.6 clear msdp statistics
- 44.4.7 connect-source
- 44.4.8 debug msdp all
- 44.4.9 debug msdp events
- 44.4.10 debug msdp filter
- 44.4.11 debug msdp fsm
- 44.4.12 debug msdp keepalive
- 44.4.13 debug msdp nsm
- 44.4.14 debug msdp packet
- 44.4.15 debug msdp peer
- 44.4.16 debug msdp timer
- 44.4.17 default-rpf-peer
- 44.4.18 description
- 44.4.19 exit-peer-mode
- 44.4.20 mesh-group
- 44.4.21 originating-rp
- 44.4.22 peer
- 44.4.23 redistribute
- 44.4.24 remote-as
- 44.4.25 router msdp
- 44.4.26 sa-filter
- 44.4.27 sa-request
- 44.4.28 sa-request-filter
- 44.4.29 show msdp global
- 44.4.30 show msdp local-sa-cache
- 44.4.31 show msdp peer
- 44.4.32 show msdp sa-cache
- 44.4.33 show msdp sa-cache summary
- 44.4.34 show msdp statistics
- 44.4.35 show msdp summary
- 44.4.36 shutdown
- 44.4.37 ttl-threshold
- 44.5 Commands for ANYCAST RP v4
- 44.6 Commands for PIM-SSM
- 44.7 Commands for DVMRP
- 44.7.1 debug dvmrp
- 44.7.2 ip dvmrp enable
- 44.7.3 ip dvmrp metric
- 44.7.4 ip dvmrp multicast-routing
- 44.7.5 ip dvmrp output-report-delay
- 44.7.6 ip dvmrp reject-non-pruners
- 44.7.7 ip dvmrp tunnel
- 44.7.8 show ip dvmrp
- 44.7.9 show ip dvmrp interface
- 44.7.10 show ip dvmrp neighbor
- 44.7.11 show ip dvmrp prune
- 44.7.12 show ip dvmrp route
- 44.8 Commands for DCSCM
- 44.8.1 access-list (Multicast Destination Control)
- 44.8.2 access-list (Multicast Source Control)
- 44.8.3 ip multicast destination-control access-group
- 44.8.4 ip multicast destination-control access-group (sip)
- 44.8.5 ip multicast destination-control access-group (vmac)
- 44.8.6 ip multicast policy
- 44.8.7 ip multicast source-control
- 44.8.8 ip multicast source-control access-group
- 44.8.9 multicast destination-control
- 44.8.10 show ip multicast destination-control
- 44.8.11 show ip multicast destination-control access-list
- 44.8.12 show ip multicast policy
- 44.8.13 show ip multicast source-control
- 44.8.14 show ip multicast source-control access-list
- 44.9 Commands for IGMP
- 44.9.1 clear ip igmp group
- 44.9.2 debug igmp event
- 44.9.3 debug igmp packet
- 44.9.4 ip igmp access-group
- 44.9.5 ip igmp immediate-leave
- 44.9.6 ip igmp join-group
- 44.9.7 ip igmp last-member-query-interval
- 44.9.8 ip igmp limit
- 44.9.9 ip igmp query-interval
- 44.9.10 ip igmp query-max-response-time
- 44.9.11 ip igmp query-timeout
- 44.9.12 ip igmp robust-variable
- 44.9.13 ip igmp static-group
- 44.9.14 ip igmp version
- 44.9.15 show ip igmp groups
- 44.9.16 show ip igmp interface
- 44.10 Commands for IGMP Snooping
- 44.10.1 clear ip igmp snooping vlan
- 44.10.2 clear ip igmp snooping vlan <1-4094> mrouter-port
- 44.10.3 debug igmp snooping all/packet/event/timer/mfc
- 44.10.4 ip igmp snooping
- 44.10.5 ip igmp snooping proxy
- 44.10.6 ip igmp snooping vlan
- 44.10.7 ip igmp snooping vlan immediate-leave
- 44.10.8 ip igmp snooping vlan l2-general-querier
- 44.10.9 ip igmp snooping vlan l2-general-querier-source
- 44.10.10 ip igmp snooping vlan l2-general-querier-version
- 44.10.11 ip igmp snooping vlan limit
- 44.10.12 ip igmp snooping vlan mrouter-port interface
- 44.10.13 ip igmp snooping vlan mrouter-port learnpim
- 44.10.14 ip igmp snooping vlan mrpt
- 44.10.15 ip igmp snooping vlan query-interval
- 44.10.16 ip igmp snooping vlan query-mrsp
- 44.10.17 ip igmp snooping vlan query-robustness
- 44.10.18 ip igmp snooping vlan report source-address
- 44.10.19 ip igmp snooping vlan specific-query-mrsp
- 44.10.20 ip igmp snooping vlan static-group
- 44.10.21 ip igmp snooping vlan suppression-query-time
- 44.10.22 show ip igmp snooping
- 44.11 Commands for IGMP Proxy
- 44.11.1 clear ip igmp proxy agggroup
- 44.11.2 debug igmp proxy all
- 44.11.3 debug igmp proxy event
- 44.11.4 debug igmp proxy mfc
- 44.11.5 debug igmp proxy packet
- 44.11.6 debug igmp proxy timer
- 44.11.7 ip igmp proxy
- 44.11.8 ip igmp proxy aggregate
- 44.11.9 ip igmp proxy downstream
- 44.11.10 ip igmp proxy limit
- 44.11.11 ip igmp proxy multicast-source
- 44.11.12 ip igmp proxy unsolicited-report interval
- 44.11.13 ip igmp proxy unsolicited-report robustness
- 44.11.14 ip igmp proxy upstream
- 44.11.15 ip multicast ssm
- 44.11.16 ip pim bsr-border
- 44.11.17 show debugging igmp proxy
- 44.11.18 show ip igmp proxy
- 44.11.19 show ip igmp proxy mroute
- 44.11.20 show ip igmp proxy upstream groups
- Chapter 45 IPv6 Multicast Protocol
- 45.1 Public Commands for Multicast
- 45.2 Commands for PIM-DM6
- 45.2.1 debug ipv6 pim timer sat
- 45.2.2 debug ipv6 pim timer srt
- 45.2.3 ipv6 mroute
- 45.2.4 ipv6 pim bsr-border
- 45.2.5 ipv6 pim dense-mode
- 45.2.6 ipv6 pim dr-priority
- 45.2.7 ipv6 pim exclude-genid
- 45.2.8 ipv6 pim hello-holdtime
- 45.2.9 ipv6 pim hello-interval
- 45.2.10 ipv6 pim multicast-routing
- 45.2.11 ipv6 pim neighbor-filter
- 45.2.12 ipv6 pim scope-border
- 45.2.13 ipv6 pim state-refresh origination-interval
- 45.2.14 show ipv6 pim interface
- 45.2.15 show ipv6 pim mroute dense-mode
- 45.2.16 show ipv6 pim neighbor
- 45.2.17 show ipv6 pim nexthop
- 45.3 Commands for PIM-SM6
- 45.3.1 clear ipv6 pim bsr rp-set
- 45.3.2 debug ipv6 pim events
- 45.3.3 debug ipv6 pim mfc
- 45.3.4 debug ipv6 pim mib
- 45.3.5 debug ipv6 pim nexthop
- 45.3.6 debug ipv6 pim nsm
- 45.3.7 debug ipv6 pim packet
- 45.3.8 debug ipv6 pim state
- 45.3.9 debug ipv6 pim timer
- 45.3.10 ipv6 mroute
- 45.3.11 ipv6 multicast unresolved-cache aging-time
- 45.3.12 ipv6 pim accept-register
- 45.3.13 ipv6 pim bsr-border
- 45.3.14 ipv6 pim bsr-candidate
- 45.3.15 ipv6 pim cisco-register-checksum
- 45.3.16 ipv6 pim dr-priority
- 45.3.17 ipv6 pim exclude-genid
- 45.3.18 ipv6 pim hello-holdtime
- 45.3.19 ipv6 pim hello-interval
- 45.3.20 ipv6 pim ignore-rp-set-priority
- 45.3.21 ipv6 pim jp-timer
- 45.3.22 ipv6 pim multicast-routing
- 45.3.23 ipv6 pim neighbor-filter
- 45.3.24 ipv6 pim register-rate-limit
- 45.3.25 ipv6 pim register-rp-reachability
- 45.3.26 ipv6 pim register-source
- 45.3.27 ipv6 pim register-suppression
- 45.3.28 ipv6 pim rp-address
- 45.3.29 ipv6 pim rp-candidate
- 45.3.30 ipv6 pim rp-register-kat
- 45.3.31 ipv6 pim scope-border
- 45.3.32 ipv6 pim sparse-mode
- 45.3.33 show ipv6 pim bsr-router
- 45.3.34 show ipv6 pim interface
- 45.3.35 show ipv6 pim mroute sparse-mode
- 45.3.36 show ipv6 pim neighbor
- 45.3.37 show ipv6 pim nexthop
- 45.3.38 show ipv6 pim rp-hash
- 45.3.39 show ipv6 pim rp mapping
- 45.4 Commands for ANYCAST RP v6
- 45.4.1 debug ipv6 pim anycast-rp
- 45.4.2 ipv6 pim anycast-rp
- 45.4.3 ipv6 pim anycast-rp
- 45.4.4 ipv6 pim anycast-rp self-rp-address
- 45.4.5 ipv6 pim rp-candidate
- 45.4.6 show debugging ipv6 pim
- 45.4.7 show ipv6 pim anycast-rp first-hop
- 45.4.8 show ipv6 pim anycast-rp non-first-hop
- 45.4.9 show ipv6 pim anycast-rp status
- 45.5 Commands for PIM-SSM6
- 45.6 Commands for IPv6 DCSCM
- 45.6.1 ipv6 access-list(ipv6 multicast source control)
- 45.6.2 ipv6 access-list(multicast destination control)
- 45.6.3 ipv6 multicast destination-control access-group
- 45.6.4 ipv6 multicast destination-control access-group (sip)
- 45.6.5 ipv6 multicast destination-control access-group (vmac)
- 45.6.6 ipv6 multicast policy
- 45.6.7 ipv6 multicast source-control
- 45.6.8 ipv6 multicast source-control access-group
- 45.6.9 multicast destination-control
- 45.6.10 show ipv6 multicast destination-control
- 45.6.11 show ipv6 multicast destination-control access-list
- 45.6.12 show ipv6 multicast policy
- 45.6.13 show ipv6 multicast source-control
- 45.6.14 show ipv6 multicast source-control access-list
- 45.7 Commands for MLD
- 45.7.1 clear ipv6 mld group
- 45.7.2 debug ipv6 mld events
- 45.7.3 debug ipv6 mld packet
- 45.7.4 ipv6 mld access-group
- 45.7.5 ipv6 mld immediate-leave
- 45.7.6 ipv6 mld join-group
- 45.7.7 ipv6 mld join-group mode source
- 45.7.8 ipv6 mld last-member-query-interval
- 45.7.9 ipv6 mld limit
- 45.7.10 ipv6 mld query-interval
- 45.7.11 ipv6 mld query-max-response-time
- 45.7.12 ipv6 mld query-timeout
- 45.7.13 ipv6 mld static-group
- 45.7.14 ipv6 mld version
- 45.7.15 show ipv6 mld groups
- 45.7.16 show ipv6 mld interface
- 45.7.17 show ipv6 mld join-group
- 45.8 Commands for MLD Snooping Configuration
- 45.8.1 clear ipv6 mld snooping vlan
- 45.8.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
- 45.8.3 debug mld snooping all/packet/event/timer/mfc
- 45.8.4 ipv6 mld snooping
- 45.8.5 ipv6 mld snooping vlan
- 45.8.6 ipv6 mld snooping vlan immediate-leave
- 45.8.7 ipv6 mld snooping vlan l2-general-querier
- 45.8.8 ipv6 mld snooping vlan limit
- 45.8.9 ipv6 mld snooping vlan mrouter-port interface
- 45.8.10 ipv6 mld snooping vlan mrouter-port learnpim6
- 45.8.11 ipv6 mld snooping vlan mrpt
- 45.8.12 ipv6 mld snooping vlan query-interval
- 45.8.13 ipv6 mld snooping vlan query-mrsp
- 45.8.14 ipv6 mld snooping vlan query-robustness
- 45.8.15 ipv6 mld snooping vlan static-group
- 45.8.16 ipv6 mld snooping vlan suppression-query-time
- 45.8.17 show ipv6 mld snooping
- Chapter 46 Commands for Multicast VLAN
- Chapter 47 Commands for ACL
- 47.1 absolute-periodic/periodic
- 47.2 absolute start
- 47.3 access-list (ip extended)
- 47.4 access-list (ip standard)
- 47.5 access-list(mac extended)
- 47.6 access-list(mac-ip extended)
- 47.7 access-list(mac standard)
- 47.8 clear access-group (in | out) statistic interface
- 47.9 firewall
- 47.10 ip access extended
- 47.11 ip access standard
- 47.12 ipv6 access-list
- 47.13 ipv6 access standard
- 47.14 ipv6 access extended
- 47.15 {ip|ipv6|mac|mac-ip} access-group
- 47.16 mac access extended
- 47.17 mac-ip access extended
- 47.18 permit | deny (ip extended)
- 47.19 permit | deny(ip standard)
- 47.20 permit | deny(ipv6 extended)
- 47.21 permit | deny(ipv6 standard)
- 47.22 permit | deny(mac extended)
- 47.23 permit | deny(mac-ip extended)
- 47.24 show access-lists
- 47.25 show access-group
- 47.26 show firewall
- 47.27 show ipv6 access-lists
- 47.28 show time-range
- 47.29 time-range
- Chapter 48 Commands for 802.1x
- 48.1 debug dot1x detail
- 48.2 debug dot1x error
- 48.3 debug dot1x fsm
- 48.4 debug dot1x packet
- 48.5 dot1x accept-mac
- 48.6 dot1x eapor enable
- 48.7 dot1x enable
- 48.8 dot1x guest-vlan
- 48.9 dot1x macfilter enable
- 48.10 dot1x max-req
- 48.11 dot1x user free-resource
- 48.12 dot1x max-user macbased
- 48.13 dot1x max-user userbased
- 48.14 dot1x port-control
- 48.15 dot1x port-method
- 48.16 dot1x privateclient enable
- 48.17 dot1x privateclient protect enable
- 48.18 dot1x re-authenticate
- 48.19 dot1x re-authentication
- 48.20 dot1x timeout quiet-period
- 48.21 dot1x timeout re-authperiod
- 48.22 dot1x timeout tx-period
- 48.23 dot1x unicast enable
- 48.24 show dot1x
- 48.25 user-control limit ipv4
- 48.26 user-control limit ipv6
- Chapter 49 Commands for the Number Limitation Function of MAC and IP in Port, VLAN
- 49.1 debug ip arp count
- 49.2 debug ipv6 nd count
- 49.3 debug switchport arp count
- 49.4 debug switchport mac count
- 49.5 debug switchport nd count
- 49.6 debug vlan mac count
- 49.7 ip arp dynamic maximum
- 49.8 ipv6 nd dynamic maximum
- 49.9 mac-address query timeout
- 49.10 show arp-dynamic count
- 49.11 show mac-address dynamic count
- 49.12 show nd-dynamic count
- 49.13 switchport arp dynamic maximum
- 49.14 switchport mac-address dynamic maximum
- 49.15 switchport mac-address violation
- 49.16 switchport nd dynamic maximum
- 49.17 vlan mac-address dynamic maximum
- Chapter 50 Commands for AM Configuration
- Chapter 51 Commands for TACACS+
- Chapter 52 Commands for RADIUS
- 52.1 aaa enable
- 52.2 aaa-accounting enable
- 52.3 aaa-accounting update
- 52.4 debug aaa packet
- 52.5 debug aaa detail attribute
- 52.6 debug aaa detail connection
- 52.7 debug aaa detail event
- 52.8 debug aaa error
- 52.9 radius nas-ipv4
- 52.10 radius nas-ipv6
- 52.11 radius-server accounting host
- 52.12 radius-server authentication host
- 52.13 radius-server dead-time
- 52.14 radius-server key
- 52.15 radius-server retransmit
- 52.16 radius-server timeout
- 52.17 radius-server accounting-interim-update timeout
- 52.18 show aaa authenticated-user
- 52.19 show aaa authenticating-user
- 52.20 show aaa config
- 52.21 show radius authenticated-user count
- 52.22 show radius authenticating-user count
- 52.23 show radius count
- Chapter 53 Commands for SSL Configuration
- Chapter 54 Commands for IPv6 Security RA
- Chapter 55 Commands for VLAN-ACL
- Chapter 56 Commands for MAB
- 56.1 authentication mab
- 56.2 clear mac-authentication-bypass binding
- 56.3 debug mac-authentication-bypass
- 56.4 mac-authentication-bypass binding-limit
- 56.5 mac-authentication-bypass enable
- 56.6 mac-authentication-bypass guest-vlan
- 56.7 mac-authentication-bypass spoofing-garp-check
- 56.8 mac-authentication-bypass timeout linkup-period
- 56.9 mac-authentication-bypass timeout offline-detect
- 56.10 mac-authentication-bypass timeout quiet-period
- 56.11 mac-authentication-bypass timeout reauth-period
- 56.12 mac-authentication-bypass timeout stale-period
- 56.13 mac-authentication-bypass username-format
- 56.14 show mac-authentication-bypass
- Chapter 57 Commands for PPPoE Intermediate Agent
- 57.1 debug pppoe intermediate agent packet {receive | send} interface ethernet
- 57.2 pppoe intermediate-agent
- 57.3 pppoe intermediate-agent (Port)
- 57.4 pppoe intermediate-agent access-node-id
- 57.5 pppoe intermediate-agent circuit-id
- 57.6 pppoe intermediate-agent identifier-string option delimiter
- 57.7 pppoe intermediate-agent remote-id
- 57.8 pppoe intermediate-agent trust
- 57.9 pppoe intermediate-agent vendor-tag strip
- 57.10 show pppoe intermediate-agent access-node-id
- 57.11 show pppoe intermediate-agent identifier-string option delimiter
- 57.12 show pppoe intermediate-agent info
- 57.1 debug pppoe intermediate agent packet {receive | send} interface ethernet
- Chapter 58 Commands for SAVI
- 58.1 Commands for SAVI
- 58.1.1 ipv6 cps prefix
- 58.1.2 ipv6 cps prefix check enable
- 58.1.3 ipv6 dhcp snooping trust
- 58.1.4 ipv6 nd snooping trust
- 58.1.5 savi check binding
- 58.1.6 savi enable
- 58.1.7 savi ipv6 binding num
- 58.1.8 savi ipv6 check source binding
- 58.1.9 savi ipv6 check source ip-address mac-address
- 58.1.10 savi ipv6 {dhcp-only | slaac-only | dhcp-slaac} enable
- 58.1.11 savi ipv6 mac-binding-limit
- 58.1.12 savi max-dad-dalay
- 58.1.13 savi max-dad-prepare-delay
- 58.1.14 savi max-slaac-life
- 58.1.15 savi timeout bind-protect
- 58.2 Commands for Monitor and Debug
- 58.1 Commands for SAVI
- Chapter 59 Commands for Web Portal Configuration
- 59.1 clear webportal binding
- 59.2 debug webportal binding
- 59.3 debug webportal error
- 59.4 debug webportal event
- 59.5 debug webportal packet
- 59.6 ip dhcp snooping binding webportal
- 59.7 show webportal
- 59.8 show webportal binding
- 59.9 webportal binding-limit
- 59.10 webportal enable
- 59.11 webportal enable (Port)
- 59.12 webportal nas-ip
- 59.13 webportal redirect
- Chapter 60 Commands for VRRP
- Chapter 61 Commands for IPv6 VRRPv3 Configuration
- Chapter 62 Commands for MRPP
- Chapter 63 Commands for ULPP
- 63.1 clear ulpp flush counter interface
- 63.2 control vlan
- 63.3 debug ulpp error
- 63.4 debug ulpp event
- 63.5 debug ulpp flush content interface
- 63.6 debug ulpp flush {send | receive} interface
- 63.7 description
- 63.8 flush disable arp
- 63.9 flush disable mac
- 63.10 flush enable arp
- 63.11 flush enable mac
- 63.12 preemption delay
- 63.13 preemption mode
- 63.14 protect vlan-reference-instance
- 63.15 show ulpp flush counter interface
- 63.16 show ulpp flush-receive-port
- 63.17 show ulpp group
- 63.18 ulpp control vlan
- 63.19 ulpp flush disable arp
- 63.20 ulpp flush disable mac
- 63.21 ulpp flush enable arp
- 63.22 ulpp flush enable mac
- 63.23 ulpp group
- 63.24 ulpp group master
- 63.25 ulpp group slave
- Chapter 64 Commands for ULSM
- Chapter 65 Commands for Mirroring Configuration
- Chapter 66 Commands for RSPAN Configuration
- Chapter 67 Commands for sFlow
- Chapter 68 Commands for SNTP
- Chapter 69 Commands for NTP
- 69.1 clock timezone
- 69.2 debug ntp adjust
- 69.3 debug ntp authentication
- 69.4 debug ntp events
- 69.5 debug ntp packet
- 69.6 debug ntp sync
- 69.7 ntp access-group
- 69.8 ntp authenticate
- 69.9 ntp authentication-key
- 69.10 ntp broadcast client
- 69.11 ntp broadcast server count
- 69.12 ntp disable
- 69.13 ntp enable
- 69.14 ntp ipv6 multicast client
- 69.15 ntp multicast client
- 69.16 ntp server
- 69.17 ntp trusted-key
- 69.18 show ntp status
- 69.19 show ntp session
- Chapter 70 Commands for DNSv4/v6
- 70.1 clear dynamic-host
- 70.2 debug dns
- 70.3 dns-server
- 70.4 dns lookup
- 70.5 show dns name-server
- 70.6 show dns domain-list
- 70.7 show dns hosts
- 70.8 show dns config
- 70.9 show dns client
- 70.10 ip domain-lookup
- 70.11 ip domain-list
- 70.12 ip dns server
- 70.13 ip dns server queue maximum
- 70.14 ip dns server queue timeout
- Chapter 71 Commands for Summer Time
- Chapter 72 Commands for Show
- 72.1 clear history all-users
- 72.2 clear logging
- 72.3 history all-users max-length
- 72.4 logging
- 72.5 logging executed-commands
- 72.6 logging loghost sequence-number
- 72.7 ping
- 72.8 ping6
- 72.9 show debugging
- 72.10 show flash
- 72.11 show history
- 72.12 show history all-users
- 72.13 show logging buffered
- 72.14 show logging executed-commands state
- 72.15 show logging source
- 72.16 show memory
- 72.17 show running-config
- 72.18 show startup-config
- 72.19 show switchport interface
- 72.20 show tcp
- 72.21 show tcp ipv6
- 72.22 show telnet login
- 72.23 show temperature
- 72.24 show tech-support
- 72.25 show udp
- 72.26 show udp ipv6
- 72.27 show version
- 72.28 traceroute
- 72.29 traceroute6
- Chapter 73 Commands for Reload Switch after Specified Time
- Chapter 74 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
- Chapter 75 Commands for Basic VSF Configuration
- Chapter 76 Commands for Configuration and Debugging of VSF Conflict Detection
- Chapter 77 Commands for VSF Debugging
- 77.1 show running-config
- 77.2 show vsf
- 77.3 show vsf topology
- 77.4 show vsf-config
- 77.5 show mad config
- 77.6 show vsf cpu-database all-member brief-information
- 77.7 show vsf cpu-database member basic-information
- 77.8 show vsf cpu-database member running-information
- 77.9 show vsf cpu-database member port-information
- 77.10 show vsf cpu-database member port-link-information
- 77.11 show slot
- 77.12 debug vsf packet detail
- 77.13 debug vsf packet
- 77.14 debug vsf event
- 77.15 debug vsf error
- Chapter 78 Commands for PoE
SGS-6341 Series Command Guide
1-45
68.2 DEBUG SNTP .................................................................................................................................... 68-8
68.3 SNTP POLLTIME ................................................................................................................................ 68-9
68.4 SNTP SERVER .................................................................................................................................. 68-9
68.5 SHOW SNTP ................................................................................................................................... 68-10
CHAPTER 69 COMMANDS FOR NTP ..........................................................................69-1
69.1 CLOCK TIMEZONE............................................................................................................................. 69-1
69.2 DEBUG NTP ADJUST ......................................................................................................................... 69-1
69.3 DEBUG NTP AUTHENTICATION ........................................................................................................... 69-2
69.4 DEBUG NTP EVENTS ......................................................................................................................... 69-2
69.5 DEBUG NTP PACKET ......................................................................................................................... 69-3
69.6 DEBUG NTP SYNC ............................................................................................................................. 69-3
69.7 NTP ACCESS-GROUP ........................................................................................................................ 69-4
69.8 NTP AUTHENTICATE .......................................................................................................................... 69-4
69.9 NTP AUTHENTICATION-KEY ............................................................................................................... 69-5
69.10 NTP BROADCAST CLIENT ................................................................................................................ 69-5
69.11 NTP BROADCAST SERVER COUNT .................................................................................................... 69-6
69.12 NTP DISABLE ................................................................................................................................. 69-6
69.13 NTP ENABLE .................................................................................................................................. 69-7
69.14 NTP IPV6 MULTICAST CLIENT ........................................................................................................... 69-7
69.15 NTP MULTICAST CLIENT .................................................................................................................. 69-8
69.16 NTP SERVER .................................................................................................................................. 69-8
69.17 NTP TRUSTED-KEY ......................................................................................................................... 69-9
69.18 SHOW NTP STATUS ......................................................................................................................... 69-9
69.19 SHOW NTP SESSION ..................................................................................................................... 69-10
CHAPTER 70 COMMANDS FOR DNSV4/V6 ................................................................70-1
70.1 CLEAR DYNAMIC-HOST ..................................................................................................................... 70-1
70.2 DEBUG DNS ..................................................................................................................................... 70-1
70.3 DNS-SERVER ................................................................................................................................... 70-2
70.4 DNS LOOKUP ................................................................................................................................... 70-3
70.5 SHOW DNS NAME-SERVER ................................................................................................................ 70-3
70.6 SHOW DNS DOMAIN-LIST ................................................................................................................... 70-4
70.7 SHOW DNS HOSTS ............................................................................................................................ 70-4
70.8 SHOW DNS CONFIG ........................................................................................................................... 70-5
70.9 SHOW DNS CLIENT ........................................................................................................................... 70-5
70.10 IP DOMAIN-LOOKUP ........................................................................................................................ 70-6
70.11 IP DOMAIN-LIST .............................................................................................................................. 70-6
70.12 IP DNS SERVER .............................................................................................................................. 70-7
70.13 IP DNS SERVER QUEUE MAXIMUM .................................................................................................... 70-7