User's Manual

Table Of Contents
15-144
Ethernet1/0/1
Port name
default cos: 0
Default CoS value of the port
Default int-Prio: 0
Default internal priority value of the port
Trust: COS DSCP
The trust state of the port
Pass-through-cos: NONE Whether forbid the modification of cos
value
Pass-through-dscp: NONE Whether forbid the modification of dscp
value
Attached Policy Map for Ingress: p1
Policy name bound to port
ClassMap
ClassMap name
classified Total data packets match this ClassMap.
If there is no Accounting for Class Map,
show NA
green
Total green data packets match this
ClassMap. If there is no Accounting for
Class Map, show NA
yellow
Total yellow data packets match this
ClassMap. If there is no Accounting for
Class Map, show NA
red
Total red data packets match this
ClassMap. If there is no Accounting for
Class Map, show NA
Queue Algorithm:
WDRR or PQ queue out method
Switch(config)#show mls qos interface ethernet1/0/1 queuing
Ethernet1/0/1:
Queue Algorithm: WDRR
Display Information
Explanation
Queue Algorithm:
WDRR or PQ queue out method
Switch# show mls qos interface ethernet 1/0/1 policy
Ethernet1/0/1:
Attached Policy Map for Ingress: p1
Classmap classified green yellow red (in packets)
c1 20 10 NA 10