User's Manual

11-42
11.27 show ethernet-oam events
Command:
show ethernet-oam events {local | remote} [interface {ethernet |} <IFNAME>]
Function:
Shows the statistic information of link events on specified or all ports with OAM enabled, including
general link events and severe link events.
Parameter:
local, show the detailed information of the local events;
remote, show the detailed information of the remote events;
<IFNAME>, the port that the statistic information of OAM link events needs to be shown, the statistic
information of OAM link events for all ports will be shown if this parameter is not specified.
Command Mode:
Admin mode
Example:
Show the statistic information of link events on Ethernet 1/0/1.
Switch#show ethernet-oam events local interface 1/0/1
ethernet 1/0/1 link-events：
OAM_local_errored-symbol-period-events:
------------------------------------------------------------------------------------------------------
event time stamp：3539 errored symbol window：1s
errored symbol low threshold：1 errored symbol high threshold：none
errored symbol：1200120 errored running total：2302512542
event running total：232
OAM_local_errored-frame-period-events:
------------------------------------------------------------------------------------------------------
event time stamp：3539 errored frame window：10s
errored frame low threshold：1 errored frame high threshold：none
errored frame：1200120 errored running total：2302512542
event running total：52
OAM_local_errored-frame-events:
------------------------------------------------------------------------------------------------------
event time stamp：3539 errored frame window：1s
errored frame low threshold：1 errored frame high threshold：none
errored frame：1200120 errored running total：2302512542