User's Manual

77-4
77.5 show mad config
Command:
show mad config
Function:
Checking the current VSF mad detection configuration.
Parameters:
None.
Default:
None.
Command Mode:
Admin and Configuration Mode.
Operation Mode:
VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
This command can only be use under the VSF operation mode. Displays whether LACP, BFD are
opened and obtins which port has open these functions.
Example:
Switch# show mad config
Current lacp MAD status: Disable
Current bfd MAD status: Detecting
Reserved ports:
Reserved ports(defaults):
interface Ethernet2/7/3
MAD lacp enabled aggregation port:
MAD BFD enabled interface:
Interface Vlan10
vsf mad ip address 10.1.1.1 255.255.255.0 member 1
vsf mad ip address 10.1.1.2 255.255.255.0 member 2
Display Message
Explaination
Current lacp MAD status
Show the current status of lacp MAD
Current bfd MAD status
Show the current status of BFD MAD
Reserved ports
The reserved ports user configured
Reserved ports(defaults)
Default reserved port (not need for configuration, default )