User's Manual

76-3
vsf mad exclude
no vsf mad exclude
Function:
When the facilities ente into the recovery status, the port that configure this command can avoid
closing and continuous transmitting. No command is delete the MAD retention port configuration.
Parameters:
None.
Default:
MAD retention port is not configured.
Command Mode:
Port Mode.
Operation Mode:
VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
VSF split off, the network will present of 2 global configuration entirety the same facilities. This
facilities connect to the network may cause network berak down. In order to prevent this happen,
the system will have multi Active detection, at the end will only retain one Active facility, th others
will enter into Recovery status. Also, it will close all the operation ports that are on the Recovery
status. Using this command can appoint which port is not closed and reserve the right to the user.
76.5 vsf mad restore
Command:
vsf mad restore
Function:
This command will recover the VSF which at Recovery state to the normal working status.
Parameters:
None.
Default:
Restore is not configured.
Command Mode:
Global Mode.
Operation Mode:
VSF Operation Mode.
VSF Role:
VSF Master.