User's Manual

75-10
75.9 vsf auto-merge enable
Command:
vsf auto-merge enable
no vsf auto-merge enable
Function:
Enable the automatic merger function of VSF groups. The no command cancels this function.
Parameters:
None.
Default:
Disable.
Command Mode:
Global Mode.
Operation Mode:
VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
When two VSF groups have the correct connection because of some reasons, the connection
method is that use the respective VSF port to connect and there is no vsf domain and vsf member
id conflict, then the up of the port, VSF creating and binding will trigger the two VSF groups to
merge automatically in the process of connection. In the connection, through the comparing of the
priorities and member id, the VSF groups which failed to elect will restart and join in the VSF groups
which successfully elected after restarting.
75.10 vsf member description
Command:
vsf member <member-id> description <text>
no vsf member <member-id> description
Function:
write some description to the member. This message will only write into the master document. No
command delete that description.
Parameters:
<member-id>
：
VSF member number <text>
：
user enter description
Default:
No description in the VSF.
Command Mode: