User's Manual

75-7
Usage Guide:
One vsf port-group can bind 8 physical ports at most, the mode of port in vsf port-group is on. When
there are more than 8 ports binding to it, it will prompt the user cannot bind. It supports spread
binding of the physical port. Currently, it only supports 10G port and logic VSF port to bind.
Example:
Create the logic VSF port and enter in the VSF port configuration mode. Bind the physical port 1/0/1
to the logic VSF port.
Switch(config)# vsf port-group 1
Switch(config)# vsf port-group interface ethernet 1/0/1
75.5 vsf domain
Command:
vsf domain <domain-id>
no vsf domain
Function:
Configure the logic domain that VSF is in. The no command recovers to be default of 1. When the
device is in independent operation mode, the vsf domain configuration becomes effective
immediately; when the device is in VSF mode, after configured vsf domain, the newest
configuration will be shown in running-config, but this configuration will become effective after it is
saved and restarted.
Parameters: <domain-id>:
domain number, range is 1 to 32.
Default:
The device is in domain 1.
Command Mode:
Global Mode.
Operation Mode:
Independent Operation Mode, VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
Domain is a kind of logic concept. The devices are connected together through VSF link; they will
make up the VSF. The set of these member devices is a VSF domain. For adapting all kinds of
network applications, multiple VSF can be deployed in the same network; the domain number is
used to distinguish the VSF. The devices in the same domain can form the VSF; the devices or VSF
groups in different domains cannot form the VSF. Before forming the VSF, it will conduct the