User's Manual

75-4
Admin and configuration mode
Usage Guide:
This command is used to debug, it is supposed to be used with the help of the technical support.
Example
：
Show the statistics of CPU receiving ARP packets.
Switch#show cpu-rx protocol arp
Type Rate-limit TotPkts CurState
arp 500 3 allowed
Chapter 75 Commands for Basic VSF
Configuration
75.1 switch convert mode
Command:
switch convert mode ( stand-alone | vsf )
Function:
Make the device transform from independent operation mode to VSF mode or transform from VSF
mode to independent operation mode.
Parameters: <stand-alone>:
Independent operation mode. <vsf>: VSF mode.
Default:
Judge the mode that the device should enter in according to the VSF configuration file of vsf.cfg.
Command Mode:
Global Mode.
Operation Mode:
Independent Operation Mode, VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
The device supports two kinds of modes: independent operation mode and VSF mode. The device
under the independent operation mode can just operate in stand-alone. The device under the VSF
mode can form VSF with other devices. The two modes can be switched through this command.
Example:
Configure the device to enter in the VSF mode when it is under the independent operation mode.