User's Manual

Chapter 50 Security Feature Configuration
54-2
am port
no am port
Enable/disable AM function on the port.
When the AM function is enabled on the
port
, no IP or ARP message will be
forwarded by default.
3. Configure the forwarding IP
Command
Explanation
Port Mode
am ip-pool <ip-address> <num>
no am ip-pool <ip-address> <num>
Configure the forwarding IP of the port.
4. Configure the forwarding MAC-IP
Command
Explanation
Port Mode
am mac-ip-pool <mac-address>
<ip-address>
no am mac-ip-pool <mac-address>
<ip-address>
Configure the forwarding MAC-IP of the
port.
5. Delete all of the configured IP or MAC-IP or both
Command
Explanation
Global Mode
no am all [ip-pool|mac-ip-pool]
Delete MAC-
IP address pool or IP
address pool or both pools configured by
all users.
6. Display relative configuration information of AM
Command
Explanation
Global Configuration Mode
show am [interface <interface-name>]
Display the AM configuration information
of one port or all ports.