User's Manual

48-16
48.4.2 Brief Introduction to MSDP Configuration Tasks
1. Configuration of MSDP Basic Function
1) Enabling MSDP (Required)
2) Configuring MSDP entities (Required)
3) Configuring the Connect-Source interface
4) Configuring static RPF entities
5) Configuring Originator RP
6) Configuring TTL value
2. Configuration of MSDP entities
1) Configuring the Connect-Source interface
2) Configuring the descriptive information for MSDP entities
3) Configuring the AS number
4) Configuring the specified mesh group of MSDP
5) Configuring the maximum size for the cache
3. Configurations on delivery of SA packets
1) Configuring filter policies for creation of SA packets
2) Configuring filter rules on how to receive and forward SA packets
3) Configuring SA request packets
4) Configuring filter policies for SA-Request packets
4. Configuration of parameters of SA-cache
1) Configuring SA packets cache
2) Configuring the aging time for entries in SA packets cache
3) Configuring the maximum size for the cache
48.4.3 Configuration of MSDP Basic Function
All the commands in this section are configured for RP in the PIM-SM domain. These RP will function as the
other peer of the MSDP entities.
Multicast
Application Server
1 PIM Register
Packet
4 Switching to the
shortest path tree
and do the delivery
2 The subscriber
joins the group
3 The
multicast
date is
delivered
through the
shared tree
Subscriber
RP