User's Manual

39-6
3）Configure OSPFv3 packet sending timer parameter (timer of broadcast interface sending HELLO packet to
poll, timer of neighboring layer3 switch invalid timeout, timer of LSA transmission delay and timer of LSA
retransmission.
Commands
Explanation
Interface Configuration Mode
IPv6 ospf hello-interval <time>
[instance-id <id>]
no IPv6 ospf hello-interval
[instance-id <id>]
Sets interval for sending HELLO packets; the
“no IPv6 ospf hello-interval [instance-id
<id>]” command restores the default setting.
IPv6 ospf dead-interval <time>
[instance-id <id>]
no IPv6 ospf dead-interval
[instance-id <id>]
Sets the interval before regarding a neighbor
layer3 switch invalid; the “
no IPv6 ospf
dead-interval [instance-id <id>]
” command
restores the default setting.
IPv6 ospf transit-delay <time>
[instance-id <id>]
no IPv6 ospf transit-delay
[instance-id <id>]
Sets the delay time before sending link-state
broadcast; the “no IPv6 ospf transit-delay
[instance-id <id>]
” command restores the
default setting.
IPv6 ospf retransmit <time>
[instance-id <id>]
no IPv6 ospf retransmit [instance-id
<id>]
.Sets the interval for retransmission of link-state
advertisement among neighbor layer3 switches;
the “no IPv6 ospf retransmit [instance-id
<id>]” command restores the default setting.
（
2
）
Configure OSPFv3 route introduction parameters
Configure OSPFv3 route introduction parameters
Commands
Explanation
OSPF Protocol Mode
[no]redistribute {kernel |connected|
static| rip| isis| bgp} [metric<value>]
[metric-type {1|2}][route-map<word>]
Introduces other protocol discovery routing
and static routing regarded as external
routing message. The [no] redistribute
{kernel |connected| static| rip| isis| bgp}
[metric<value>] [metric-type
{1|2}][route-map<word>] command
cancels imported external routing message.