User's Manual

Configuration Guide of SGS-6341-Series
1-26
 Multicast Routing Features
 Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol
Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source
Specific Multicast)
 Supports DVMRP (Distance Vector Multicast Routing Protocol)
 Supports IGMP v1/v2/v3 and MLD v1/v2
 Layer 2 Features
 Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
 Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and
1000BASE-T ports
 Auto-MDI/MDI-X detection on each RJ45 port
 Prevents packet loss flow control
- IEEE 802.3x pause frame flow control in full-duplex mode
- Back-pressure flow control in half-duplex mode
 High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
 16K MAC address table, automatic source address learning and aging
 Supports VLAN
- IEEE 802.1Q tag-based VLAN
- GVRP for dynamic VLAN management
- Up to 256 VLANs groups, out of 4041 VLAN IDs
- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
- Private VLAN Edge (PVE) supported
- GVRP protocol for Management VLAN
- Protocol-based VLAN
- MAC-based VLAN
- IP subnet VLAN
 Supports Link Aggregation
- Maximum 12 trunk groups, up to 8 ports per trunk group
- IEEE 802.3ad LACP (Link Aggregation Control Protocol)
- Cisco ether-channel (static trunk)
 Supports Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
- Supports BPDU & root guard
 Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
 Provides port mirror (many-to-1)
 Quality of Service
 8 priority queues on all switch ports
 Support for strict priority and WRR (Weighted Round Robin) CoS policies
 Traffic classification
- IEEE 802.1p CoS/ToS
- IPv4/IPv6 DSCP