User's Manual

Configuration Guide of SGS-6341-Series
1-25
1.3 Product Features
 Physical Port
SGS-6341-24T4X
 24-port 10/100/1000BASE-T Gigabit Ethernet RJ45
 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
 RJ45 to DB9 console interface for switch basic management and setup
SGS-6341-24P4X
 24-port 10/100/1000BASE-T Gigabit Ethernet RJ45 with 24-port IEEE 802.3at/af PoE injector
 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
 RJ45 to DB9 console interface for switch basic management and setup
SGS-6341-48T4X
 48-port 10/100/1000BASE-T Gigabit Ethernet RJ45
 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
 RJ45 to DB9 console interface for switch basic management and setup
 Power over Ethernet (SGS-6341-24P4X)
 Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
 Backward compatible with IEEE 802.3af Power over Ethernet
 Up to 24 ports of IEEE 802.3af/802.3at devices powered
 Supports PoE power up to 30 watts for each PoE port
 Auto detects powered device (PD)
 Circuit protection prevents power interference between ports
 Remote power feeding up to 100 meters
 PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD classification detection
- PoE schedule
 IP Stacking
 Connects with stack member via both Gigabit TP/SFP interface and 10G SFP+ slots
 Single IP address management, supporting up to 24 units stacked together
 IP Routing Features
 IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
 Routing interface provides per VLAN routing mode
 VRRPv1/v3 protocol for redundant routing deployment
 Supports route redistribution