Datasheet

SGS-6341-24P4X
7
Specications
Product
SGS-6341-24P4X
HardwareSpecications
Hardware Version 2
Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 100/1000BASE-X SFP combo interfaces with Port-21 to Port-24
Supports 100/1000Mbps dual mode and DDM
SFP+ Slots
4 10GBASE-SR/LR SFP+ interface (port-25 to port-28)
Compatible with 1000BASE-SX/LX/BX SFP transceiver
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Switch Architecture Store-and-forward
Switch Fabric 128Gbps/non-blocking
Switch Throughput 95.23Mpps
Address Table 16K MAC address table with auto learning function
Shared Data Buffer 1.5MB
Flow Control
Back pressure for half -duplex
IEEE 802.3x pause frame for full -duplex
Jumbo Frame 10KB
LED Indicator
System:
PWR/MGMT/SYS/PoE
Ports:
10/100/1000T RJ45 Port: LNK/ACT and PoE-in-Use
1/10G SFP+ slot: LNK/ACT
Dimensions (W x D x H) 440 x 320 x 43.6 mm, 1U height
Weight 4503g
Power Consumption
15.4 watts/52.51 BTU (System)
401.7 watts/ 1369.8 BTU (System+PoE)
Power Requirements AC 100~240V, 50/60Hz
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at PoE+ PSE
PoE Power Supply Type End-span
PoE Power Output Per port 53V DC, 30.8 watts (max.)
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 370 watts (max.)
PoE Ability PD @ 9 watts 24 units
PoE Ability PD @ 15 watts 24 units
PoE Ability PD @ 30 watts 12 units
Management Function
SystemConguration Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
Management
Supports both IPv4 and IPv6 addressing
Supports the user IP security inspection for IPv4/IPv6 SNMP
Supports MIB and TRAP
Supports IPv4/IPv6 FTP/TFTP
Supports IPv4/IPv6 NTP
Supports RMON 1, 2, 3, 9 four groups
Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
Supports IPv4/IPv6 SSH
TherightcongurationforuserstoadoptRADIUSserver’sshellmanagement
Supports CLI, console, Telnet
Supports SNMP v1, v2c and v3
Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
Supports Syslog server for IPv4 and IPv6
Supports TACACS+
Layer 3 Function
Routing Protocol Static routing, RIP, OSPF, BGP and PBR
Routing Table Total 1K entries (IPv4/IPv6 shared)
Layer 2 Function
PortConguration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect
Port Status
Displayeachport’sspeedduplexmode,linkstatus,owcontrolstatusand
auto negotiation status