Datasheet

SGS-6341-24P4X
3
IP Stacking Management
The SGS-6341-24P4X supports IP stacking function that helps network managers
to easily configure up to 24 switches in the same series via one single IP
address instead of connecting and setting each unit one by one. The IP Stacking
technology groups PLANET SGS-6341 switch series together to enable centralized
management through a single unit, regardless of physical location or switch type,
as long as they are connected to the same local network.
– IPv4/IPv6 DSCP
– Port-based WRR
• Strict priority and WRR CoS policies
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1
and v2 snooping
• Querier mode support
• Supports Multicast VLAN Register (MVR)
Security
• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IPSourceGuardpreventsIPspoongattacks
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
Management
• Management IP for IPv4 and IPv6
• Switch Management Interface
– Console/Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– -SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for
IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Supports DDM
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and
events)
• Supports sFlow
• Supports ULDP
• Supports ULPP (Uplink Protection Protocol)
• Supports ULSM (Uplink State Monitor protocol)
• Supports LLDP/LLDP MED
• Supports DHCP Option82, Option37/38
• Supports ping, trace route function for IPv4 and IPv6
Layer 3 Routing Support
The SGS-6341-24P4X enables the administrator to conveniently boost network
efficiency by configuring Layer 3 static routing manually, the RIP (Routing
Information Protocol) or OSPF (Open Shortest Path First) settings automatically.
The RIP can employ the hop count as a routing metric and prevent routing loops
by implementing a limit on the number of hops allowed in a path from the source
to a destination. The OSPF is an interior dynamic routing protocol for autonomous
system based on link state. The protocol creates a database for link state by
exchanging link states among Layer 3 switches, and then uses the Shortest Path
First algorithm to generate a route table based on that database.
Full IPv6 Support
The SGS-6341-24P4X provides IPv6 management and enterprise-level secure
features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the
enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t
need to replace the network facilities when the IPv6 FTTx edge network is built.
Robust Layer 2 Features
The SGS-6341-24P4X can be programmed for basic switch management functions
such as port speed configuration, port aggregation, VLAN, Multiple Spanning
Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides
802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By
supporting port aggregation, the SGS-6341-24P4X allows the operation of a high-
speed trunk combined with multiple ports. It enables up to 16 groups for trunking
with a maximum of 8 ports for each group.
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch
IP Stacking
Up to 24 units with SGS-6341 Series
Slave
10G Fiber 10G Fiber
Master
Slave