User's Manual

6-3
cluster ip-pool <commander-ip>
no cluster ip-pool
Configure the private IP address pool
for cluster member devices.
cluster commander [<cluster_name>]
no cluster commander
Create or delete a cluster.
cluster member {candidate-sn <candidate-sn>
| mac-address <mac-addr> [id <member-id> ]}
no cluster member {id <member-id> |
mac-address <mac-addr>}
Add or remove a member switch.
3. Configure attributes of the cluster in the commander switch
Command
Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable or disable adding newly
discovered candidate switch to the
cluster.
cluster member auto-to-user
Change
automatically added
members into manually added ones.
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-
alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max number of lost
keep-
alive messages that can be
tolerated in the cluster.
Admin mode
clear cluster nodes [nodes-sn
<candidate-sn-list> | mac-address
<mac-addr>]
Clear nodes in the list of candidate
switches maintained by the switch.
4. Configure attributes of the cluster in the candidate switch
Command
Explanation
Global Mode
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-
alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max number of lost
keep-alive
messages that can be
tolerated in the clusters.
5. Remote cluster network management
Command
Explanation
Admin Mode
rcommand member <member-id>
In the commander switch, this
command is used to configure and