User's Manual

4-20
ftp-server enable
no ftp-server enable
Start FTP server and support IPv4, IPv6, the no
command shuts down FTP server and prevents
FTP user from logging in.
（2）Configure FTP login username and password
Command
Explanation
Global Mode
ip ftp username <username>
{nopassword | password {0 | 7}
<password>}
no ip ftp username<username>
Configure FTP login username and password;
this no command will delete the username and
password.
（3）Modify FTP server connection idle time
Command
Explanation
Global Mode
ftp-server timeout <seconds>
Set connection idle time.
3. TFTP server configuration
（1）Start TFTP server
Command
Explanation
Global Mode
tftp-server enable
no tftp-server enable
Start TFTP server, the no command shuts down
TFTP server and prevents TFTP user from
logging in.
（2）Modify TFTP server connection idle time
Command
Explanation
Global Mode
tftp-server retransmission-timeout
<seconds>
Set maximum retransmission time within timeout
interval.
（3）Modify TFTP server connection retransmission time
Command
Explanation
Global Mode
tftp-server retransmission-number
<number>
Set the retransmission time for TFTP server.