User's Manual

Configuration Guide of SGS-6341-Series
2-36
■ SFP/SFP+ slots
SFP/SFP+ mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module: From 550 meters
(Multi-mode fiber) to 10/30/50/70/120 kilometers (Single-mode fiber).
■ Console Port
The console port is an RJ45 type, RS232 male serial port connector. It is an interface for connecting a
terminal directly. Through the console port, it provides rich diagnostic information including IP address
setting, factory reset, port management, link status and system setting. Users can use the attached
RS232 cable in the package and connect to the console port on the device. After the connection, users
can run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix, Winterm and so on) to
enter the startup screen of the device.
■ USB Interface
The USB port is a USB2.0 type; it is an interface for uploading/restoring the configuration/firmware.
■ Alarm Port
The alarm port is an RJ45 type, an interface for monitoring the external devices (such as alarm) when
monitoring external devices has failed.
■ MGMT Port
The MGMT port is an RJ45 type, an independent interface for Telnet or SSH.