SGS-6340 Series User Manual

Input the right usernam
e and password and then the main Web configuration interface is shown below.
Figure 3-11 Main Web Configuration Interface
When configuring the switch, the name of the switch is composed of English letters.
3.1.2.3 Manage the Switch via SNMP Network Management Software
The followings are required by SNMP network management software to manage switches:
1) IP addresses are configured on the switch;
2) The IP address of the client host and that of the VLAN interface on the switch it subordinates to
should be in the same segment;
3) If 2) is not met, the client should be able to reach an IP address of the switch through devices like
routers;
4) SNMP should be enabled.
The host with SNMP network management software should be able to ping the IP address of the switch, so
that when running, SNMP network management software will be able to find it and implement read/write
operation on it. Details about how to manage switches via SNMP network management software will not be
covered in this manual; please refer to “Simple Network Management software user manual”.
3.2 CLI Interface
The switch provides three management interfaces for users: CLI (Command Line Interface) interface, Web
interface and Simple Network Management software. We will introduce the CLI interface and Web
configuration interface in details. Web interface is familiar with CLI interface function and will not be covered.
Please refer to “Simple Network Management software user manual”.
3-9