SGS-6340 Series User Manual

St
ep 3: Login to the switch.
Login to the Web configuration interface. Valid login name and password are required, otherwise, the switch
will reject HTTP access. This is the method to protect the switch from unauthorized access. As a result, when
Telnet is enabled for configuring and managing the switch, username and password for authorized Telnet
users must be configured with the following command:
username <username> privilege <privilege> [password (0|7) <password>]
To open the local authentication style with the following command: authentication line web login local.
Privilege option must exist and is just 15. Assume an authorized user in the switch has a username “admin”,
and password “admin”, the configuration procedure should be as follows:
Switch#
Switch#config
Switch (config)#username admin privilege 15 password 0 admin
Switch (config)#authentication line web login local
The Web login interface of SGS-6340 Series is shown below:
Figure 3-10 Web Login Interface
3-8