SGS-6340 Series User Manual

User’s Manual of SGS-6340 seriesT
1.3 Product Features
 Physical Ports
 4/24/48-Port 10/100/1000BASE-T Gigabit Ethernet RJ45
 4/24 1000BASE-X mini-GBIC/SFP slots, SFP type auto detection (only SGS-6340-20S4C4X
supports 100BASE-FX SFP)
 4 10GBASE-SR/LR SFP+
slots, compatible with 1000BASE-SX/LX/BX SFP (SGS-6340-20S4C4X
only)
 16 10GBASE-SR/LR SFP+
slots, compatible with 1000BASE-SX/LX/BX SFP (SGS-6340-16XR
only)
 RJ45 to DB9 console interface for switch basic management and setup
 Power over Ethernet (SGS-6340-24P4S only)
 Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
 Backward compatible with IEEE 802.3af Power over Ethernet
 Up to 24 ports of IEEE 802.3af/802.3at devices powered
 Supports PoE power up to 30 watts for each PoE port
 Auto detects powered device (PD)
 Circuit protection prevents power interference between ports
 Remote power feeding up to 100 meters
 PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD classification detection
- PoE schedule
 IP Stacking
 Connects with stack member via both Gigabit TP and SFP interfaces
 Single IP address management, supporting up to 24 units stacked together
 IP Routing Features
 Supports maximum 128 static routes and route summarization
 Supports dynamic routing protocol: RIP and OSPF
 Layer 2 Features
 Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
 Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and
1000BASE-T ports
 Auto-MDI/MDI-X detection on each RJ45 port
 Prevents packet loss flow control
- IEEE 802.3x pause frame flow control in full-duplex mode
- Back-pressure flow control in half-duplex mode
 High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
1-6