SGS-6340 Series User Manual

21-107
1. Configure the MAC aging-time
Command Explanation
Global Mode
mac-address-table aging-time
<0|aging-time>
no mac-address-table aging-time
Configure the MAC address aging-time.
2. Configure static MAC forwarding or filter entry
3. Clear dynamic address table
Command Explanation
Admin Mode
clear mac-address-table dynamic [address
<mac-addr>] [vlan <vlan-id>] [interface
[ethernet | portchannel] <interface-name>]
Clear the dynamic address table.
4. Configure MAC learning through CPU control
Command Explanation
Global Mode
mac-address-learning cpu-control
no mac-address-learning cpu-control
Enable MAC learning through CPU
control, the no command restores that
the chip automatically learn MAC
address.
Command Explanation
Global Mode
mac-address-table {static | static-multicast
| blackhole} address <mac-addr> vlan
<vlan-id > [interface ethernet
<interface-name>] |
[source|destination|both]
no mac-address-table {static |
static-multicast | blackhole } [address
<mac-addr>] [vlan <vlan-id>] [interface
ethernet <interface-name>]
Configure static MAC entries, static
multicast MAC entries, filter address
entries.