SGS-6340 Series User Manual

ManualsBrandsPLANET Technology ManualsStandard SwitchesLayer 3 20-Port 100/1000X SFP 4-Port Gigabit TP/SFP 4-Port 10G SFP Stackable Managed Switch

131

132

133

134

135

136

137

138

139

140

Table Of Contents

Chapter 1 INTRODUCTION
- 1.1 Packet Contents
- 1.2 Product Description
- 1.3 Product Features
- 1.4 Product Specifications
Chapter 2 INSTALLATION
- 2.1 Hardware Description
- 2.2 Installing the Managed Switch
Chapter 3 Switch Management
- 3.1 Management Options
  - 3.1.1 Out-Of-Band Management
  - 3.1.2 In-band Management
- 3.2 CLI Interface
Chapter 4 Basic Switch Configuration
- 4.1 Basic Configuration
- 4.2 Telnet Management
  - 4.2.1 Telnet
    - 4.2.1.1 Introduction to Telnet
    - 4.2.1.2 Telnet Configuration Task List
  - 4.2.2 SSH
- 4.3 Configure Switch IP Addresses
  - 4.3.1 Switch IP Addresses Configuration Task List
- 4.4 SNMP Configuration
- 4.5 Switch Upgrade
Chapter 5 File System Operations
- 5.1 Introduction to File Storage Devices
- 5.2 File System Operation Configuration Task List
- 5.3 Typical Applications
- 5.4 Troubleshooting
Chapter 6 Cluster Configuration
- 6.1 Introduction to cluster network management
- 6.2 Cluster Network Management Configuration Sequence
- 6.3 Examples of Cluster Administration
- 6.4 Cluster Administration Troubleshooting
Chapter 7 Port Configuration
- 7.1 Introduction to Port
- 7.2 Network Port Configuration Task List
- 7.3 Port Configuration Example
- 7.4 Port Troubleshooting
Chapter 8 Port Isolation Function Configuration
- 8.1 Introduction to Port Isolation Function
- 8.2 Task Sequence of Port Isolation
- 8.3 Port Isolation Function Typical Examples
Chapter 9 Port Loopback Detection Function Configuration
- 9.1 Introduction to Port Loopback Detection Function
- 9.2 Port Loopback Detection Function Configuration Task List
- 9.3 Port Loopback Detection Function Example
- 9.4 Port Loopback Detection Troubleshooting
Chapter 10 ULDP Function Configuration
- 10.1 Introduction to ULDP Function
- 10.2 ULDP Configuration Task Sequence
- 10.3 ULDP Function Typical Examples
- 10.4 ULDP Troubleshooting
Chapter 11 LLDP Function Operation Configuration
- 11.1 Introduction to LLDP Function
- 11.2 LLDP Function Configuration Task Sequence
- 11.3 LLDP Function Typical Example
- 11.4 LLDP Function Troubleshooting
Chapter 12 Port Channel Configuration
- 12.1 Introduction to Port Channel
- 12.2 Brief Introduction to LACP
- 12.3 Port Channel Examples
- 12.4 Port Channel Troubleshooting
Chapter 13 MTU Configuration
- 13.1 Introduction to MTU
- 13.2 MTU Configuration Task Sequence
Chapter 14 EFM OAM Configuration
- 14.1 Introduction to EFM OAM
- 14.2 EFM OAM Configuration
- 14.3 EFM OAM Example
- 14.4 EFM OAM Troubleshooting
Chapter 15 PORT SECURITY
- 15.1 Introduction to PORT SECURITY
- 15.2 PORT SECURITY Configuration Task List
- 15.3 Example of PORT SECURITY
- 15.4 PORT SECURITY Troubleshooting
Chapter 16 DDM Configuration
- 16.1 Introduction to DDM
  - 16.1.1 Brief Introduction to DDM
  - 16.1.2 DDM Function
- 16.2 DDM Configuration Task List
- 16.3 Examples of DDM
- 16.4 DDM Troubleshooting
Chapter 17 LLDP-MED
- 17.1 Introduction to LLDP-MED
- 17.2 LLDP-MED Configuration Task Sequence
- 17.3 LLDP-MED Example
- 17.4 LLDP-MED Troubleshooting
Chapter 18 bpdu-tunnel Configuration
- 18.1 Introduction to bpdu-tunnel
  - 18.1.1 bpdu-tunnel function
  - 18.1.2 Background of bpdu-tunnel
- 18.2 bpdu-tunnel Configuration Task List
- 18.3 Examples of bpdu-tunnel
- 18.4 bpdu-tunnel Troubleshooting
Chapter 19 EEE Energy-saving Configuration
- 19.1 Introduction to EEE Energy-saving
- 19.2 EEE Energy-saving configuration List
- 19.3 EEE Energy-saving Typical Examples
Chapter 20 VLAN Configuration
- 20.1 VLAN Configuration
- 20.2 Dot1q-tunnel Configuration
- 20.3 Selective Q-in-Q Configuration
- 20.4 VLAN Translation Configuration
- 20.5 Multi-to-One VLAN Translation Configuration
- 20.6 Dynamic VLAN Configuration
- 20.7 GVRP Configuration
- 20.8 Voice VLAN Configuration
Chapter 21 MAC Table Configuration
- 21.1 Introduction to MAC Table
  - 21.1.1 Obtaining MAC Table
  - 21.1.2 Forward or Filter
- 21.2 Mac Address Table Configuration Task List
- 21.3 Typical Configuration Examples
- 21.4 MAC Table Troubleshooting
- 21.5 MAC Address Function Extension
  - 21.5.1 MAC Address Binding
- 21.6 MAC Notification Configuration
Chapter 22 MSTP Configuration
- 22.1 Introduction to MSTP
- 22.2 MSTP Region
- 22.3 MSTP Configuration Task List
- 22.4 MSTP Example
- 22.5 MSTP Troubleshooting
Chapter 23 QoS Configuration
- 23.1 Introduction to QoS
- 23.2 QoS Configuration Task List
- 23.3 QoS Example
- 23.4 QoS Troubleshooting
Chapter 24 Flow-based Redirection
- 24.1 Introduction to Flow-based Redirection
- 24.2 Flow-based Redirection Configuration Task Sequence
- 24.3 Flow-based Redirection Examples
- 24.4 Flow-based Redirection Troubleshooting Help
Chapter 25 Flexible Q-in-Q Configuration
- 25.1 Introduction to Flexible Q-in-Q
- 25.2 Flexible Q-in-Q Example
- 25.3 Flexible Q-in-Q Troubleshooting
Chapter 26 Layer 3 Management Configuration
- 26.1 Layer 3 Management Interface
  - 26.1.1 Introduction to Layer 3 Management Interface
  - 26.1.2 Layer 3 Interface Configuration Task List
- 26.2 IP Configuration
- 26.3 Static Route
- 26.4 RIP
- 26.5 OSPF
- 26.6 ARP
Chapter 27 ARP Scanning Prevention Function Configuration
- 27.1 Introduction to ARP Scanning Prevention Function
- 27.2 ARP Scanning Prevention Configuration Task Sequence
- 27.3 ARP Scanning Prevention Typical Examples
- 27.4 ARP Scanning Prevention Troubleshooting Help
Chapter 28 Prevent ARP Spoofing Configuration
- 28.1 Overview
- 28.2 Prevent ARP Spoofing configuration
- 28.3 Prevent ARP Spoofing Example
Chapter 29 ARP GUARD Configuration
- 29.1 Introduction to ARP GUARD
- 29.2 ARP GUARD Configuration Task List
Chapter 30 Gratuitous ARP Configuration
- 30.1 Introduction to Gratuitous ARP
- 30.2 Gratuitous ARP Configuration Task List
- 30.3 Gratuitous ARP Configuration Example
- 30.4 Gratuitous ARP Troubleshooting
Chapter 31 DHCP Configuration
- 31.1 Introduction to DHCP
- 31.2 DHCP Server Configuration
- 31.3 DHCP Relay Configuration
- 31.4 DHCP Configuration Examples
- 31.5 DHCP Troubleshooting
Chapter 32 DHCPv6 Configuration
- 32.1 Introduction to DHCPv6
- 32.2 DHCPv6 Server Configuration
- 32.3 DHCPv6 Relay Delegation Configuration
- 32.4 DHCPv6 Prefix Delegation Server Configuration
- 32.5 DHCPv6 Prefix Delegation Client Configuration
- 32.6 DHCPv6 Configuration Examples
- 32.7 DHCPv6 Troubleshooting
Chapter 33 DHCP Option 82 Configuration
- 33.1 Introduction to DHCP Option 82
  - 33.1.1 DHCP Option 82 Message Structure
  - 33.1.2 Option 82 Working Mechanism
- 33.2 DHCP Option 82 Configuration Task List
- 33.3 DHCP Option 82 Application Examples
- 33.4 DHCP Option 82 Troubleshooting
Chapter 34 DHCP Option 60 and option 43
- 34.1 Introduction to DHCP Option 60 and Option 43
- 34.2 DHCP Option 60 and Option 43 Configuration Task List
- 34.3 DHCPv6 Option 60 and Option 43 Example
- 34.4 DHCP Option 60 and Option 43 Troubleshooting
Chapter 35 DHCPv6 Options 37, 38
- 35.1 Introduction to DHCPv6 Options 37, 38
- 35.2 DHCPv6 Options 37, 38 Configuration Task List
- 35.3 DHCPv6 Options 37, 38 Examples
  - 35.3.1 DHCPv6 Snooping options 37, 38 Example
  - 35.3.2 DHCPv6 Relay option37, 38 Example
- 35.4 DHCPv6 Options 37, 38 Troubleshooting
Chapter 36 DHCP Snooping Configuration
- 36.1 Introduction to DHCP Snooping
- 36.2 DHCP Snooping Configuration Task Sequence
- 36.3 DHCP Snooping Typical Application
- 36.4 DHCP Snooping Troubleshooting Help
  - 36.4.1 Monitor and Debug Information
  - 36.4.2 DHCP Snooping Troubleshooting Help
Chapter 37 DHCP Snooping Option 82 Configuration
- 37.1 Introduction to DHCP Snooping Option 82
  - 37.1.1 DHCP Option 82 Message Structure
  - 37.1.2 DHCP Snooping Option 82 Working Mechanism
- 37.2 DHCP Snooping Option 82 Configuration Task List
- 37.3 DHCP Snooping Option 82 Application Examples
- 37.4 DHCP Snooping Option 82 Troubleshooting
Chapter 38 IPv4 Multicast Protocol
- 38.1 IPv4 Multicast Protocol Overview
- 38.2 DCSCM
- 38.3 IGMP Snooping
Chapter 39 IPv6 Multicast Protocol
- 39.1 MLD Snooping
Chapter 40 Multicast VLAN
- 40.1 Introductions to Multicast VLAN
- 40.2 Multicast VLAN Configuration Task List
- 40.3 Multicast VLAN Examples
Chapter 41 ACL Configuration
- 41.1 Introduction to ACL
- 41.2 ACL Configuration Task List
- 41.3 ACL Example
- 41.4 ACL Troubleshooting
Chapter 42 802.1x Configuration
- 42.1 Introduction to 802.1x
- 42.2 802.1x Configuration Task List
- 42.3 802.1x Application Example
- 42.4 802.1x Troubleshooting
Chapter 43 The Number Limitation Function of MAC and IP in Port, VLAN Configuration
- 43.1 The Number Limitation Function of MAC and IP in Port, VLAN Configuration Task Sequence
- 43.2 The Number Limitation Function of MAC and IP in Port, VLAN Typical Examples
- 43.3 The Number Limitation Function of MAC and IP in Port, VLAN Troubleshooting Help
Chapter 44 Operational Configuration of AM Function
- 44.1 Introduction to AM Function
- 44.2 AM Function Configuration Task List
- 44.3 AM Function Example
- 44.4 AM Function Troubleshooting
Chapter 45 Security Feature Configuration
- 45.1 Introduction to Security Feature
- 45.2 Security Feature Configuration
- 45.3 Security Feature Example
Chapter 46 TACACS+ Configuration
- 46.1 Introduction to TACACS+
- 46.2 TACACS+ Configuration Task List
- 46.3 TACACS+ Scenarios Typical Examples
- 46.4 TACACS+ Troubleshooting
Chapter 47 RADIUS Configuration
- 47.1 Introduction to RADIUS
  - 47.1.1 AAA and RADIUS Introduction
  - 47.1.2 Message Structure for RADIUS
- 47.2 RADIUS Configuration Task List
- 47.3 RADIUS Typical Examples
  - 47.3.1 IPv4 RADIUS Example
  - 47.3.2 IPv6 RADIUS Example
- 47.4 RADIUS Troubleshooting
Chapter 48 SSL Configuration
- 48.1 Introduction to SSL
  - 48.1.1 Basic Element of SSL
- 48.2 SSL Configuration Task List
- 48.3 SSL Typical Example
- 48.4 SSL Troubleshooting
Chapter 49 IPv6 Security RA Configuration
- 49.1 Introduction to IPv6 Security RA
- 49.2 IPv6 Security RA Configuration Task Sequence
- 49.3 IPv6 Security RA Typical Examples
- 49.4 IPv6 Security RA Troubleshooting Help
Chapter 50 MAB Configuration
- 50.1 Introduction to MAB
- 50.2 MAB Configuration Task List
- 50.3 MAB Example
- 50.4 MAB Troubleshooting
Chapter 51 PPPoE Intermediate Agent Configuration
- 51.1 Introduction to PPPoE Intermediate Agent
  - 51.1.1 Brief Introduction to PPPoE
  - 51.1.2 Introduction to PPPoE IA
- 51.2 PPPoE Intermediate Agent Configuration Task List
- 51.3 PPPoE Intermediate Agent Typical Application
- 51.4 PPPoE Intermediate Agent Troubleshooting
Chapter 52 Web Portal Configuration
- 52.1 Introduction to Web Portal Authentication
- 52.2 Web Portal Authentication Configuration Task List
- 52.3 Web Portal Authentication Typical Example
- 52.4 Web Portal Authentication Troubleshooting
Chapter 53 VLAN-ACL Configuration
- 53.1 Introduction to VLAN-ACL
- 53.2 VLAN-ACL Configuration Task List
- 53.3 VLAN-ACL Configuration Example
- 53.4 VLAN-ACL Troubleshooting
Chapter 54 SAVI Configuration
- 54.1 Introduction to SAVI
- 54.2 SAVI Configuration
- 54.3 SAVI Typical Application
- 54.4 SAVI Troubleshooting
Chapter 55 MRPP Configuration
- 55.1 Introduction to MRPP
- 55.2 MRPP Configuration Task List
- 55.3 MRPP Typical Scenario
- 55.4 MRPP Troubleshooting
Chapter 56 ULPP Configuration
- 56.1 Introduction to ULPP
- 56.2 ULPP Configuration Task List
- 56.3 ULPP Typical Examples
  - 56.3.1 ULPP Typical Example1
  - 56.3.2 ULPP Typical Example2
- 56.4 ULPP Troubleshooting
Chapter 57 ULSM Configuration
- 57.1 Introduction to ULSM
- 57.2 ULSM Configuration Task List
- 57.3 ULSM Typical Example
- 57.4 ULSM Troubleshooting
Chapter 58 Mirror Configuration
- 58.1 Introduction to Mirror
- 58.2 Mirror Configuration Task List
- 58.3 Mirror Examples
- 58.4 Device Mirror Troubleshooting
Chapter 59 sFlow Configuration
- 59.1 Introduction to sFlow
- 59.2 sFlow Configuration Task List
- 59.3 sFlow Examples
- 59.4 sFlow Troubleshooting
Chapter 60 RSPAN Configuration
- 60.1 Introduction to RSPAN
- 60.2 RSPAN Configuration Task List
- 60.3 Typical Examples of RSPAN
- 60.4 RSPAN Troubleshooting
Chapter 61 ERSPAN
- 61.1 Introduction to ERSPAN
- 61.2 ERSPAN Configuration Task List
- 61.3 Typical Examples of ERSPAN
- 61.4 ERSPAN Troubleshooting
Chapter 62 SNTP Configuration
- 62.1 Introduction to SNTP
- 62.2 Typical Examples of SNTP Configuration
Chapter 63 NTP Function Configuration
- 63.1 Introduction to NTP Function
- 63.2 NTP Function Configuration Task List
- 63.3 Typical Examples of NTP Function
- 63.4 NTP Function Troubleshooting
Chapter 64 Summer Time Configuration
- 64.1 Introduction to Summer Time
- 64.2 Summer Time Configuration Task Sequence
- 64.3 Examples of Summer Time
- 64.4 Summer Time Troubleshooting
Chapter 65 DNSv4/v6 Configuration
- 65.1 Introduction to DNS
- 65.2 DNSv4/v6 Configuration Task List
- 65.3 Typical Examples of DNS
- 65.4 DNS Troubleshooting
Chapter 66 Monitor and Debug
- 66.1 Ping
- 66.2 Ping6
- 66.3 Traceroute
- 66.4 Traceroute6
- 66.5 Show
- 66.6 Debug
- 66.7 System log
Chapter 67 Reload Switch after Specified Time
- 67.1 Introduction to Reload Switch after Specified Time
- 67.2 Reload Switch after Specified Time Task List
Chapter 68 Debugging and Diagnosis for Packets Received and Sent by CPU
- 68.1 Introduction to Debugging and Diagnosis for Packets Received and Sent by CPU
- 68.2 Debugging and Diagnosis for Packets Received and Sent by CPU Task List
Chapter 69 Dying Gasp Configuration
- 69.1 Introduction to Dying Gasp
- 69.2 Dying Gasp Typical Examples
- 69.3 Dying Gasp Troubleshooting
Chapter 70 PoE Configuration
- 70.1 Introduction to PoE
- 70.2 PoE Configuration
- 70.3 Typical Application of PoE
- 70.4 PoE Troubleshooting Help

14-47

 Ensuring the used board supports remote loopback function.

 Port should not configure STP, MRPP, ULPP, Flow Control, loopback detection

functions after it enables OAM loopback function, because OAM remote loopback

function and these functions are mutually exclusive.