SGS-6340 Series User Manual

12-35
4. Set load-balance method for port-group
Command Explanation
Aggregation Port Mode
load-balance {src-mac | dst-mac | dst-src-mac |
src-ip | dst-ip | dst-src-ip}
Set load-balance for port-group.
5. Set the sy
stem priority of LACP protocol
Command Explanation
Global Mode
lacp system-priority <system-priority>
no lacp system-priority
Set the system priority of LACP
protocol, the no command restores
the default value.
6. Set the po
rt priorit
y of the current port in LACP protocol
Command Explanation
Port Mode
lacp port-priority <port-priority>
no lacp port-priority
Set the port priority in LACP protocol.
The no command restores the default
value.
7. Set the ti
meout mode
of the current port in LACP protocol
Command Explanation
Port Mode
lacp timeout {short | long}
no lacp timeout
Set the timeout mode in LACP
protocol. The no command restores
the default value.
12.3 Port Channel Examples
Scenario 1: Configuring Port Channel in LACP.