SGS-6340 Series User Manual

12-34
In an aggregation group, the port which has the smallest port ID and is in the selected state will
be the master port while the other ports in the selected state will be the member port.
12.2.3 Port Channel Configuration Task List
1. Create a port group in Global Mode
2. Add ports to the specified group from the Port Mode of respective ports
3. Enter port-channel configuration mode
4. Set load-balance method for port-group
5. Set the system priority of LACP protocol
6. Set the port priority of the current port in LACP protocol
7. Set the timeout mode of the current port in LACP protocol
1. Creating a port group
Command Explanation
Global Mode
port-group <port-group-number>
no port-group <port-group-number>
Create or delete a port group.
2.
Add ph
ysical ports to the port group
Command Explanation
Port Mode
port-group <port-group-number> mode
{active | passive | on}
no port-group
Add the ports to the port group and set their
mode.
3. Enter port-cha
nnel co
nfiguration mode.
Command Explanation
Global Mode
interface port-channel
<port-channel-number>
Enter port-channel configuration mode.