Layer 3 Gigabit/10 Gigabit Stackable Managed Switch SGS-6310 Series Quick Installation Guide
Table of Contents 1. Package Contents........................................................................................ 3 2. Switch Management..................................................................................... 4 3. Requirements.............................................................................................. 5 4. Terminal Setup............................................................................................ 6 4.1 Logging on to the Console......................
1. Package Contents Thank you for purchasing Layer 3 Gigabit/10 Gigabit Stackable Managed Switch, SGS-6310-16S8C4XR/SGS-6310-24T4X/SGS-6310-24P4X Unless specified, “Managed Switch” mentioned in this Quick Installation Guide refers to the SGS-6310-16S8C4XR/SGS-6310-24T4X/SGS-6310-24P4X.
2. Switch Management To set up the Managed Switch, the user needs to configure the Managed Switch for network management. The Managed Switch provides two management options: Out-of-Band Management and In-Band Management. Out-of-Band Management Out-of-band management is the management through console interface. Generally, the user will use out-of-band management for the initial switch configuration, or when in-band management is not available.
3. Requirements zz Workstations running Windows XP/2003/Vista/2008/7/8/10, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. zz Workstations are installed with Ethernet NIC (Network Interface Card) zz Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS232 converter. The above Workstations have been installed with terminal emulator, such as Tera Term or PuTTY.
4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem.
4.1 Logging on to the Console Once the terminal is connected to the device, power on the Managed Switch, and the terminal will display “running testing procedures”. Then, the following message asks for the login user name and password. The factory default user name and password are as follows as the login screen in Figure 4-3 appears. Username: admin Password: admin Figure 4-3 Managed Switch Console Login Screen The user can now enter commands to manage the Switch.
The previous command would apply the following settings for the Managed Switch. IPv4 Address: 192.168.1.254 Subnet Mask: 255.255.255.0 Figure 4-4 Configuring IPv4 Address Screen To check the current IP address or modify a new IP address for the Managed Switch, please use the procedures as follows: Show the current IP address 1. On “Switch#” prompt, enter “show ip interface brief”. 2. The screen displays the current IP address, subnet mask and gateway as shown in Figure 4-5.
4.3 Setting 1000BASE-X for 10G SFP+ Port The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP transceivers by manual setting and the default SFP+ port speed is set in the fiber auto mode, so the end-user can plug the transceiver directly. In another example, the end-user has to force the fiber connection with 1000BASE-X SFP transceiver in the tgigaethernet 0/1.
5. Starting Web Management The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, Google Chrome or Apple Safari. Managed Switch RJ45/UTP Cable PC/Workstation with Web Browser 192.168.0.X IP Address: 192.168.0.254 Figure 5-1 IP Management Diagram The following shows how to start up the Web Management of the Managed Switch.
5.1 Logging in to the Managed Switch from copper ports 1. Use Internet Explorer 8.0 or above Web browser and enter IP address http://192.168.0.254 (that you have just set in console) to access the Web interface. 2. When the following dialog box appears, please enter the configured username “admin” and password “admin” (or the username/password you have changed via console). The login screen in Figure 5-2 appears. Figure 5-2 Login Screen 3.
4. The Switch Menu on the left of the Web page lets you access all the commands and statistics the Switch provides. Now, you can use the Web management interface to continue the Switch management or manage the Managed Switch by console interface. Please refer to the user manual for more. 5.2 Saving Configuration via the Web The configuration area is to show the content that is selected in the navigation area.
6. LED Indicators 6.1 SGS-6310-24T4X System LED PWR SYS Color Function Green Lights to indicate that the Switch has power. Off Power is off. Green Slow blinks to indicate the system is normally starting up. Interfaces LED LNK/ACT Color Function Lights Indicating the port is running and the connection is successfully established. Blinks Indicating that the switch is actively sending or receiving data over that port.
6.2 SGS-6310-24P4X System LED PWR SYS Color Function Green Lights to indicate that the Switch has power. Off Power is off. Green Slow blinks to indicate the system is normally starting up. Interfaces LED 1000 LNK/ ACT 10/100 LNK/ ACT Color Function Lights Indicating the port is running at 1000Mbps speed and successfully established. Blinks Indicating that the switch is actively sending or receiving data over that port.
6.3 SGS-6310-16S8C4XR System LED PWR SYS Color Function Green Lights to indicate that the Switch has power. Off Power is off. Green Slow blinks to indicate the system is normally starting up. Interfaces LED LNK/ACT Color Function Lights Indicating the port is running and the connection is successfully established. Blinks Indicating that the switch is actively sending or receiving data over that port.
7. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET support team. PLANET online FAQs: http://www.planet.com.tw/en/support/faq.php?type=1 Support team mail address: support@planet.com.tw SGS-6310-Series User’s Manual https://www.planet.com.
