Datasheet

7
SGS-6310 series
Specications
Product
SGS-6310-24T4X SGS-6310-24P4X SGS-6310-16S8C4XR SGS-6310-48T6X SGS-6310-48P6XR
Hardware Specications
10/100/1000 RJ45 Ports 24 24 8 (combo) 48 48
100/1000BASE-X SFP Ports -- -- 24 -- --
10G SFP+ Ports
4 10GBASE-SR/LR SFP+ interface
Backward compatible with 1000BASE-X SFP transceiver
6 10GBASE-SR/LR SFP+ interface Backward
compatible with 1000BASE-X SFP transceiver
Console Port 1 x RJ45-to-RS232 serial port (9600, 8, N, 1)
DRAM 256Mbytes 512Mbytes
Flash Memory 16Mbytes 16Mbytes
Dimensions (W x D x H) 440 x 180 x 44 mm 440 x 210 x 44mm 440 x 280 x 44 mm 440 x 280 x 44 mm 440 x 300 x 44mm
Weight 2600g 3000g 4000g 4300g 5200g
Power Consumption
35 watts/
153.58 BTU
25 watts/
85.25BTU (System)
38 watts/129.58BTU
48 watts/
163.68 BTU
48 watts/
163.68 BTU (System)
408 watts/
1392.49 BTU
(System + PoE)
830 watts/
2830.3 BTU
(System+PoE)
Power Requirements- AC
AC 100~240V,
50/60Hz
AC 100~240V,
50/60Hz
Dual AC: 100~240V,
50/60Hz
AC: 100~240V,
50/60Hz
AC: 100~240V,
50/60Hz
Power Requirements- DC -- -- -- -- DC 55V
Fan -- 2 2 2 2
LED
SYS, PWR (Green) SYS, PWR, PoE (Green) SYS, PWR (Green) SYS, PWR (Green) SYS, PWR, PoE (Green)
10/100/1000T
RJ45 Port: LNK/
ACT(Green)
1/10G SFP+ Port:
LNK/ACT (Green)
10/100/1000T RJ45
Port: LNK/ACT and
PoE-in-Use (Green)
1/10G SFP+ Port: LNK/
ACT (Green)
10/100/1000T RJ45 Port:
LNK/ACT (Green)
1/10G SFP+ Port: LNK/
ACT (Green)
10/100/1000T RJ45
Port: LNK/ACT
(Green)
1/10G SFP+ Port:
LNK/ACT (Green)
10/100/1000T RJ45 Port:
LNK/ACT and PoE-in-
Use (Green)
1/10G SFP+ Port: LNK/
ACT (Green)
Switching Specications
Switch Architecture Store-and-forward
Switch Fabric 128Gbps/non-blocking 216Gbps/non-blocking
Switch Throughput 95.23Mpps 160.7Mpps
Address Table 16K MAC address table with auto learning function 16K MAC address table with auto learning function
ARP Table 2K 2K
Routing Table 2040 2040
VLAN Interface 64 64
IP Interface 64 64
ACL Table 1024 1024
Shared Data Buffer 1.5MB 1.5MB
Jumbo Frame 9KBytes 9KBytes
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Power over Ethernet Specications
PoE Standard --
IEEE 802.3af/at PoE+
PSE
-- --
IEEE 802.3af/at PoE+
PSE
PoE Power Supply Type -- End-span -- -- End-span
PoE Power Output --
Per port 54V DC,
30 watts (max.)
-- --
Per port 54V DC,
30 watts (max.)
Power Pin Assignment -- 1/2(+), 3/6(-) -- -- 1/2(+), 3/6(-)
PoE Power Budget -- 370 watts (max.) -- --
370 watts (max.) AC
740 watts (max.) DC
740 watts (max.) AC
+
DC
IPv4 Layer 3 Functions
IP Routing Protocol
Static route
RIPv1/v2
OSPFv2
Hardware-based Layer 3 routing