Datasheet

3
SGS-6310 series
– Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and
events)
– SNMP trap for interface Link Up and Link Down notication
– BOOTP and DHCP for IP address assignment
– System Maintenance
– Firmware upload/download via TFTP or HTTP Protocol for
IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Supports sFlow
• DHCP Functions
– DHCP Option82
– DHCP server/relay/client
• Network Diagnostic
– Supports ping, traceroute function for IPv4 and IPv6
– Supports DDM (Digital Diagnostic Monitor)
• Supports ISSU (In-service Software Upgrade) to guaranteeing
non-stop user data transmission when the system is upgraded.
Power over Ethernet
(SGS-6310-24P4X / SGS-6310-48P6XR)
• Complies with IEEE 802.3af/at Power over Ethernet Plus, end-
span PSE
• Up to 24 ports of IEEE 802.3af/at devices powered (SGS-
6310-24P4X)
• Up to 48 ports of IEEE 802.3af/at devices powered (SGS-
6310-48P6XR)
• Support up to 6KV thunder-proof of the PoE port and power
supply
• Supports PoE power up to 30 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limitation
– PD classication detection
– PoE schedule
Redundant Power System
(SGS-6310-16S8C4XR / SGS-6310-48P6XR)
• 100~240V AC Dual power redundant (SGS-6310-16S8C4XR)
• 100~240V AC and 55V DC Dual power redundant (SGS-6310-
48P6XR)
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
Layer 3 Routing Support
The SGS-6310 series enables the administrator to conveniently boost network
efficiency by configuring Layer 3 static routing manually, the RIP (Routing
Information Protocol) or OSPF (Open Shortest Path First) settings automatically.
► The RIP can employ the hop count as a routing metric and prevent routing
loops by implementing a limit on the number of hops allowed in a path from
the source to a destination.
► The OSPF is an interior dynamic routing protocol for autonomous system
based on link state. The protocol creates a database for link state by
exchanging link states among Layer 3 switches, and then uses the Shortest
Path First algorithm to generate a route table based on that database.
Strong Multicast
The SGS-6310 series supports abundant multicast features. In Layer 2, it features
IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1 snooping. With Multicast VLAN
Register (MVR), multicast receiver/sender control and illegal multicast source
detect functions which make the SGS-6310 series great for any robust networking.
Full IPv6 Support
The SGS-6310-Series supports IPv4-to-IPv6 technologies including IPv4 manual/
automatic tunnel, IPv6-to-IPv4 tunnel, and Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) tunnel. It comprehensively supports IPv6 Neighbor
Discovery, DHCPv6, Path MTU Discovery, IPv6-based Telnet, SSH and ACL,
meeting the need of IPv6 network device manage ment and service control.
Robust Layer 2 Features
The SGS-6310 series can be programmed for basic switch management functions
such as port speed conguration, port aggregation, VLAN, Multiple Spanning Tree
Protocol, bandwidth control and IGMP snooping. This switch provides 802.1Q
tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting
port link aggregation, the SGS-6310 series allows the operation of a high-speed
trunk combined with multiple ports. It enables up to 64 groups for trunking with a
maximum of 8 ports for each group.
L2/L4
Managed Switch
L2/L4
Managed Switch
Q-in-Q
MSTP
MLD
LLDP
IGMP
QoS
LACP
Excellent Layer 2 to Layer 4 Trafc Control
The SGS-6310 series is loaded with powerful traffic management and WRR
features to enhance services offered by enterprises. The WRR functionalities
include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are
particularly useful for multi-tenant unit, multi-business unit, Telco, or network
service applications. It also empowers the enterprises to take full advantage of the
limited network resources and guarantees the best in VoIP and video conferencing
transmission.
Powerful Network Security
The SGS-6310 series offers comprehensive Layer 2 to Layer 4 Access Control
List (ACL) for enforcing security to the edge. It can be used to restrict network
access by denying packets based on source and destination IP address, TCP/UDP