Datasheet

2
SGS-6310 series
– Supports BPDU & root guard
• Port mirroring to monitor the incoming or outgoing trafc on a
particular port (one-to-one and many-to-one)
• Provides port mirror (many-to-1)
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco UDLD (uni-directional link detection) that
monitors a link between two switches and blocks the ports on
both ends of the link if the link fails at any point between the
two devices
Quality of Service
• 8 priority queues on all switch ports
• Support for strict priority and WRR (Weighted Round Robin)
CoS policies
• Trafc classication
– IEEE 802.1p CoS/ToS
– IPv4/IPv6 DSCP
– Port-based WRR
• Strict priority and WRR CoS policies
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD v1 snooping
• Querier mode support
• Supports Multicast VLAN Register (MVR)
Security
• Authentication
– IEEE 802.1x port-based network access authentication
– MAC-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS servers
for IPv4 and IPv6
– RADIUS/TACACS+ login users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
– Time-based ACL
• DHCP snooping to lter distrusted DHCP messages
• IP Source Guard prevents IP spoong attacks
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– Console/Telnet Command Line Interface
– HTTP Web switch management
– SNMP v1 and v2c switch management
– SSHv1/v2, TLSv1.2 and SNMPv3 secure access
• SNMP Management
High Performance 10Gbps Ethernet Capacity
The four to six SFP+ ports built in the SGS-6310 series boast a high-performance
switch architecture that is capable of providing non-blocking switch fabric and wire-
speed throughput as high as up to 120Gbps, which greatly meets high bandwidth
demands in the LAN. Each of the SFP+ ports supports Dual-Speed, 10GBASE-
SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose
the suitable SFP/SFP+ transceiver according to the transmission distance or the
transmission speed required to extend the network efciently.
Centralized Hardware Stacking Management
Two of the 10G SFP+ ports can be congured to connect several SGS-6310 series
for building a virtually logical facility. The stackable SGS-6310 series, suitable for
the enterprises, service providers and telecoms, provides high port density, large
uplink bandwidth and high stacking performance, thus giving great flexibility for
different application requirements. The SGS-6310 series can connect as a ring
for redundancy and ensures that data integrity is retained even if one switch in
the stack fails. You can even hot-swap switches without disrupting the network
operations.
48 x 10/100/1000BASE-T RJ45
Ports
6 x 1/10G SFP+ Slots
RJ45 Type
Console
Master
Standby Master
Slave
Slave
Hardware Stacking
Up to 8 units with SGS-6310 Series
Redundant Ring, Fast Recovery for Critical Network Applications
The SGS-6310 series supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions. It
incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)
technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to
enhance system reliability and uptime in harsh environments. In a certain simple
ring network, the recovery time could be less than 10ms to quickly bring the
network back to normal operation.
ERPS Ring for Metropolitan Area Network Application
Recovery Time < 10ms
10G
10G
10G
10G
Headquarters
Enterprise Branch
SGS-6310-16S8C4XR
SGS-6310 Series
Enterprise Branch
SGS-6310-24P4X
Enterprise Branch
SGS-6310-24T4X