User's Manual

User’s Manual of SGS-5240 Series Managed Switch
32
2.2.3 Installing the SFP/SFP+ Transceiver
The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Managed Switch, as the Figure 2-2-4 shows..
Figure 2-2-4: Plug-in the SFP/SFP+ Transceiver
 Approved PLANET SFP/SFP+ Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP/SFP+ transceivers. The following list of approved
PLANET SFP/SFP+ transceivers is correct at the time of publication:
Gigabit Ethernet Transceiver (1000BASE-X SFP)
Model DDM
Speed
(Mbps)
Connector
Interface
Fiber Mode Distance
Wavelength
(nm)
Operating
Temp.
MGB-GT -- 1000 Copper -- 100m --
0 ~ 60 ℃
MGB-SX(V2) YES 1000 LC Multi Mode 550m 850nm
0 ~ 60 ℃
MGB-SX2(V2) YES 1000 LC Multi Mode 2km 1310nm
0 ~ 60 ℃
MGB-LX(V2) YES 1000 LC Single Mode 20km 1310nm
0 ~ 60 ℃
MGB-L40 YES 1000 LC Single Mode 40km 1310nm
0 ~ 60 ℃
MGB-L80 YES 1000 LC Single Mode 80km 1550nm
0 ~ 60 ℃
MGB-L120(V2) YES 1000 LC Single Mode 120km 1550nm
0 ~ 60 ℃
MGB-TSX YES 1000 LC Multi Mode 550m 850nm
-40 ~ 75 ℃
MGB-TSX2 YES 1000 LC Multi Mode 2km 1310nm
-40 ~ 75 ℃
MGB-TLX(V2) YES 1000 LC Single Mode 20km 1310nm
-40 ~ 75 ℃
MGB-TL40 YES 1000 LC Single Mode 40km 1310nm
-40 ~ 75 ℃
MGB-TL80 YES 1000 LC Single Mode 80km 1550nm
-40 ~ 75 ℃