User's Manual

User’s Manual of SGS-5240 Series Managed Switch
238
 Link-layer Address–IPv6 link-layer address associated with the entry.
 IPv6 Address–IPv6 address corresponding to the client.
 Lifetime–The time (number of seconds) for which this IPv6 address is leased to the client.
 VLAN–VLAN to which this entry is bound.
 Interface–Port or group to which this entry is bound.
 Type
–Entry types include:
 NA–Non-temporary address.
 TA
–Temporary address.
 Clear –Removes all dynamically learned snooping entries from RAM.
4.7.13 IPv4 Source Guard
4.7.13.1 Interface Configuration
Security > IP Source Guard > Interface Configuration page is used to set the filtering type based on source IP address, or
source IP address and MAC address pairs.
◆Checking Mode – Configures the switch to filter inbound traffic based source IP address, or source IP address and
corresponding MAC address. (Default: None)
 None – Disables IP source guard filtering on the port.
 Source IP – Enables traffic filtering based on IP addresses stored in the binding table.
 Source IP and MAC – Enables traffic filtering based on IP addresses and corresponding MAC addresses stored in
the binding table.
◆Max Static Table Entry – The maximum number of entries that can be bound to an interface. (Range: 1-5; Default: 5) This
parameter sets the maximum number of address entries that can be mapped to an interface in the binding table, including both