User's Manual

User’s Manual of SGS-5240 Series Managed Switch
19
 Quality of Service
 Input and output rate limit per port bandwidth control
 8 priority queues on all switch ports
- IEEE 802.1p CoS/DSCP/IP Precedence
- VLAN ID
- ACL
- Policy-based ingress and egress QoS
 Multicast
 Supports IPv4 IGMP snooping v1, v2 and v3
 Supports IPv6 MLD snooping v1 and v2
 Querier mode support
 IPv4 IGMP snooping port filtering
 IPv6 MLD snooping port filtering
 MVR (Multicast VLAN Registration)
 Security
 Authentication
- IEEE 802.1x port-based/MAC-based network access authentication
- IEEE 802.1x authentication with guest VLAN
- Built-in RADIUS client to cooperate with the RADIUS servers
- RADIUS/TACACS+ users access authentication
- Guest VLAN assigns clients to a restricted VLAN with limited services
 Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List (ACL)
- Time-based ACL
 DHCP snooping to filter distrusted DHCP messages
 Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
 IP Source Guard prevents IP spoofing attacks
 IP address access management to prevent unauthorized intruder
 Management
 IPv4 and IPv6 dual stack management
 Switch Management Interfaces
- Console and Telnet Command Line Interface
- HTTP web switch management
- SNMP v1 and v2c switch management
- SSHv2, SSLv3 and SNMP v3 secure access
 SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
 Built-in Trivial File Transfer Protocol (TFTP) client
 BOOTP and DHCP for IP address assignment
 System Maintenance
- Firmware upload/download via HTTP
- Reset button for system reboot or reset to factory default