User's Manual

User’s Manual of SGS-5240 Series Managed Switch
120
To show the multicast groups configured for an IGMP filter Range:
4.2.11.4 Configure Filter Interface
Switch Management > IGMP Filtering and Throttling>Configure Filter Interface page is used to assign and IGMP filter profile to
interfaces on the switch, or to throttle multicast traffic by limiting the maximum number of multicast groups an interface can join
at the same time.
◆Interface – Port or group identifier. An IGMP profile or throttling setting can be applied to a port or trunk. When ports are
configured as trunk members, the trunk uses the settings applied to the first port member in the trunk.
◆Profile ID – Selects an existing profile to assign to an interface.
◆Max Multicast Groups – Sets the maximum number of multicast groups an interface can join at the same time. (Range:
1-255; Default: 255)
◆Current Multicast Groups – Displays the current multicast groups the interface has joined.
◆Throttling Action Mode – Sets the action to take when the maximum number of multicast groups for the interface has been
exceeded. (Default: Deny)
■Deny - The new multicast group join report is dropped.
■Replace - The new multicast group replaces an existing group.
◆Throttling Status – Indicates if the throttling action has been implemented on the interface. (Options: True or False)